Total
145 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2016-1000340 | 2 Bouncycastle, Redhat | 4 Bc-java, Jboss Fuse, Satellite and 1 more | 2025-05-12 | N/A |
| In the Bouncy Castle JCE Provider versions 1.51 to 1.55, a carry propagation bug was introduced in the implementation of squaring for several raw math classes have been fixed (org.bouncycastle.math.raw.Nat???). These classes are used by our custom elliptic curve implementations (org.bouncycastle.math.ec.custom.**), so there was the possibility of rare (in general usage) spurious calculations for elliptic curve scalar multiplications. Such errors would have been detected with high probability by the output validation for our scalar multipliers. | ||||
| CVE-2022-36795 | 1 F5 | 11 Big-ip Access Policy Manager, Big-ip Advanced Firewall Manager, Big-ip Analytics and 8 more | 2025-05-08 | 5.3 Medium |
| In BIG-IP versions 17.0.x before 17.0.0.1, 16.1.x before 16.1.3.1, 15.1.x before 15.1.7, and 14.1.x before 14.1.5.1, when an LTM TCP profile with Auto Receive Window Enabled is configured on a virtual server, undisclosed traffic can cause the virtual server to stop processing new client connections. | ||||
| CVE-2021-45960 | 6 Debian, Libexpat Project, Netapp and 3 more | 10 Debian Linux, Libexpat, Active Iq Unified Manager and 7 more | 2025-05-05 | 8.8 High |
| In Expat (aka libexpat) before 2.4.3, a left shift by 29 (or more) places in the storeAtts function in xmlparse.c can lead to realloc misbehavior (e.g., allocating too few bytes, or only freeing memory). | ||||
| CVE-2020-24370 | 4 Debian, Fedoraproject, Lua and 1 more | 4 Debian Linux, Fedora, Lua and 1 more | 2025-05-05 | 5.3 Medium |
| ldebug.c in Lua 5.4.0 allows a negation overflow and segmentation fault in getlocal and setlocal, as demonstrated by getlocal(3,2^31). | ||||
| CVE-2024-43838 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: fix overflow check in adjust_jmp_off() adjust_jmp_off() incorrectly used the insn->imm field for all overflow check, which is incorrect as that should only be done or the BPF_JMP32 | BPF_JA case, not the general jump instruction case. Fix it by using insn->off for overflow check in the general case. | ||||
| CVE-2024-56770 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: netem: account for backlog updates from child qdisc In general, 'qlen' of any classful qdisc should keep track of the number of packets that the qdisc itself and all of its children holds. In case of netem, 'qlen' only accounts for the packets in its internal tfifo. When netem is used with a child qdisc, the child qdisc can use 'qdisc_tree_reduce_backlog' to inform its parent, netem, about created or dropped SKBs. This function updates 'qlen' and the backlog statistics of netem, but netem does not account for changes made by a child qdisc. 'qlen' then indicates the wrong number of packets in the tfifo. If a child qdisc creates new SKBs during enqueue and informs its parent about this, netem's 'qlen' value is increased. When netem dequeues the newly created SKBs from the child, the 'qlen' in netem is not updated. If 'qlen' reaches the configured sch->limit, the enqueue function stops working, even though the tfifo is not full. Reproduce the bug: Ensure that the sender machine has GSO enabled. Configure netem as root qdisc and tbf as its child on the outgoing interface of the machine as follows: $ tc qdisc add dev <oif> root handle 1: netem delay 100ms limit 100 $ tc qdisc add dev <oif> parent 1:0 tbf rate 50Mbit burst 1542 latency 50ms Send bulk TCP traffic out via this interface, e.g., by running an iPerf3 client on the machine. Check the qdisc statistics: $ tc -s qdisc show dev <oif> Statistics after 10s of iPerf3 TCP test before the fix (note that netem's backlog > limit, netem stopped accepting packets): qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 2767766 bytes 1848 pkt (dropped 652, overlimits 0 requeues 0) backlog 4294528236b 1155p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 2767766 bytes 1848 pkt (dropped 327, overlimits 7601 requeues 0) backlog 0b 0p requeues 0 Statistics after the fix: qdisc netem 1: root refcnt 2 limit 1000 delay 100ms Sent 37766372 bytes 24974 pkt (dropped 9, overlimits 0 requeues 0) backlog 0b 0p requeues 0 qdisc tbf 10: parent 1:1 rate 50Mbit burst 1537b lat 50ms Sent 37766372 bytes 24974 pkt (dropped 327, overlimits 96017 requeues 0) backlog 0b 0p requeues 0 tbf segments the GSO SKBs (tbf_segment) and updates the netem's 'qlen'. The interface fully stops transferring packets and "locks". In this case, the child qdisc and tfifo are empty, but 'qlen' indicates the tfifo is at its limit and no more packets are accepted. This patch adds a counter for the entries in the tfifo. Netem's 'qlen' is only decreased when a packet is returned by its dequeue function, and not during enqueuing into the child qdisc. External updates to 'qlen' are thus accounted for and only the behavior of the backlog statistics changes. As in other qdiscs, 'qlen' then keeps track of how many packets are held in netem and all of its children. As before, sch->limit remains as the maximum number of packets in the tfifo. The same applies to netem's backlog statistics. | ||||
| CVE-2024-53125 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf: sync_linked_regs() must preserve subreg_def Range propagation must not affect subreg_def marks, otherwise the following example is rewritten by verifier incorrectly when BPF_F_TEST_RND_HI32 flag is set: 0: call bpf_ktime_get_ns call bpf_ktime_get_ns 1: r0 &= 0x7fffffff after verifier r0 &= 0x7fffffff 2: w1 = w0 rewrites w1 = w0 3: if w0 < 10 goto +0 --------------> r11 = 0x2f5674a6 (r) 4: r1 >>= 32 r11 <<= 32 (r) 5: r0 = r1 r1 |= r11 (r) 6: exit; if w0 < 0xa goto pc+0 r1 >>= 32 r0 = r1 exit (or zero extension of w1 at (2) is missing for architectures that require zero extension for upper register half). The following happens w/o this patch: - r0 is marked as not a subreg at (0); - w1 is marked as subreg at (2); - w1 subreg_def is overridden at (3) by copy_register_state(); - w1 is read at (5) but mark_insn_zext() does not mark (2) for zero extension, because w1 subreg_def is not set; - because of BPF_F_TEST_RND_HI32 flag verifier inserts random value for hi32 bits of (2) (marked (r)); - this random value is read at (5). | ||||
| CVE-2024-50017 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/mm/ident_map: Use gbpages only where full GB page should be mapped. When ident_pud_init() uses only GB pages to create identity maps, large ranges of addresses not actually requested can be included in the resulting table; a 4K request will map a full GB. This can include a lot of extra address space past that requested, including areas marked reserved by the BIOS. That allows processor speculation into reserved regions, that on UV systems can cause system halts. Only use GB pages when map creation requests include the full GB page of space. Fall back to using smaller 2M pages when only portions of a GB page are included in the request. No attempt is made to coalesce mapping requests. If a request requires a map entry at the 2M (pmd) level, subsequent mapping requests within the same 1G region will also be at the pmd level, even if adjacent or overlapping such requests could have been combined to map a full GB page. Existing usage starts with larger regions and then adds smaller regions, so this should not have any great consequence. | ||||
| CVE-2024-49933 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk_iocost: fix more out of bound shifts Recently running UBSAN caught few out of bound shifts in the ioc_forgive_debts() function: UBSAN: shift-out-of-bounds in block/blk-iocost.c:2142:38 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... UBSAN: shift-out-of-bounds in block/blk-iocost.c:2144:30 shift exponent 80 is too large for 64-bit type 'u64' (aka 'unsigned long long') ... Call Trace: <IRQ> dump_stack_lvl+0xca/0x130 __ubsan_handle_shift_out_of_bounds+0x22c/0x280 ? __lock_acquire+0x6441/0x7c10 ioc_timer_fn+0x6cec/0x7750 ? blk_iocost_init+0x720/0x720 ? call_timer_fn+0x5d/0x470 call_timer_fn+0xfa/0x470 ? blk_iocost_init+0x720/0x720 __run_timer_base+0x519/0x700 ... Actual impact of this issue was not identified but I propose to fix the undefined behaviour. The proposed fix to prevent those out of bound shifts consist of precalculating exponent before using it the shift operations by taking min value from the actual exponent and maximum possible number of bits. | ||||
| CVE-2024-46684 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: binfmt_elf_fdpic: fix AUXV size calculation when ELF_HWCAP2 is defined create_elf_fdpic_tables() does not correctly account the space for the AUX vector when an architecture has ELF_HWCAP2 defined. Prior to the commit 10e29251be0e ("binfmt_elf_fdpic: fix /proc/<pid>/auxv") it resulted in the last entry of the AUX vector being set to zero, but with that change it results in a kernel BUG. Fix that by adding one to the number of AUXV entries (nitems) when ELF_HWCAP2 is defined. | ||||
| CVE-2024-44938 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: jfs: Fix shift-out-of-bounds in dbDiscardAG When searching for the next smaller log2 block, BLKSTOL2() returned 0, causing shift exponent -1 to be negative. This patch fixes the issue by exiting the loop directly when negative shift is found. | ||||
| CVE-2024-43840 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf, arm64: Fix trampoline for BPF_TRAMP_F_CALL_ORIG When BPF_TRAMP_F_CALL_ORIG is set, the trampoline calls __bpf_tramp_enter() and __bpf_tramp_exit() functions, passing them the struct bpf_tramp_image *im pointer as an argument in R0. The trampoline generation code uses emit_addr_mov_i64() to emit instructions for moving the bpf_tramp_image address into R0, but emit_addr_mov_i64() assumes the address to be in the vmalloc() space and uses only 48 bits. Because bpf_tramp_image is allocated using kzalloc(), its address can use more than 48-bits, in this case the trampoline will pass an invalid address to __bpf_tramp_enter/exit() causing a kernel crash. Fix this by using emit_a64_mov_i64() in place of emit_addr_mov_i64() as it can work with addresses that are greater than 48-bits. | ||||
| CVE-2024-42231 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: zoned: fix calc_available_free_space() for zoned mode calc_available_free_space() returns the total size of metadata (or system) block groups, which can be allocated from unallocated disk space. The logic is wrong on zoned mode in two places. First, the calculation of data_chunk_size is wrong. We always allocate one zone as one chunk, and no partial allocation of a zone. So, we should use zone_size (= data_sinfo->chunk_size) as it is. Second, the result "avail" may not be zone aligned. Since we always allocate one zone as one chunk on zoned mode, returning non-zone size aligned bytes will result in less pressure on the async metadata reclaim process. This is serious for the nearly full state with a large zone size device. Allowing over-commit too much will result in less async reclaim work and end up in ENOSPC. We can align down to the zone size to avoid that. | ||||
| CVE-2024-41011 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: don't allow mapping the MMIO HDP page with large pages We don't get the right offset in that case. The GPU has an unused 4K area of the register BAR space into which you can remap registers. We remap the HDP flush registers into this space to allow userspace (CPU or GPU) to flush the HDP when it updates VRAM. However, on systems with >4K pages, we end up exposing PAGE_SIZE of MMIO space. | ||||
| CVE-2022-31104 | 1 Bytecodealliance | 2 Cranelift-codegen, Wasmtime | 2025-04-23 | 4.8 Medium |
| Wasmtime is a standalone runtime for WebAssembly. In affected versions wasmtime's implementation of the SIMD proposal for WebAssembly on x86_64 contained two distinct bugs in the instruction lowerings implemented in Cranelift. The aarch64 implementation of the simd proposal is not affected. The bugs were presented in the `i8x16.swizzle` and `select` WebAssembly instructions. The `select` instruction is only affected when the inputs are of `v128` type. The correspondingly affected Cranelift instructions were `swizzle` and `select`. The `swizzle` instruction lowering in Cranelift erroneously overwrote the mask input register which could corrupt a constant value, for example. This means that future uses of the same constant may see a different value than the constant itself. The `select` instruction lowering in Cranelift wasn't correctly implemented for vector types that are 128-bits wide. When the condition was 0 the wrong instruction was used to move the correct input to the output of the instruction meaning that only the low 32 bits were moved and the upper 96 bits of the result were left as whatever the register previously contained (instead of the input being moved from). The `select` instruction worked correctly if the condition was nonzero, however. This bug in Wasmtime's implementation of these instructions on x86_64 represents an incorrect implementation of the specified semantics of these instructions according to the WebAssembly specification. The impact of this is benign for hosts running WebAssembly but represents possible vulnerabilities within the execution of a guest program. For example a WebAssembly program could take unintended branches or materialize incorrect values internally which runs the risk of exposing the program itself to other related vulnerabilities which can occur from miscompilations. We have released Wasmtime 0.38.1 and cranelift-codegen (and other associated cranelift crates) 0.85.1 which contain the corrected implementations of these two instructions in Cranelift. If upgrading is not an option for you at this time, you can avoid the vulnerability by disabling the Wasm simd proposal. Additionally the bug is only present on x86_64 hosts. Other aarch64 hosts are not affected. Note that s390x hosts don't yet implement the simd proposal and are not affected. | ||||
| CVE-2022-31169 | 1 Bytecodealliance | 2 Cranelift-codegen, Wasmtime | 2025-04-23 | 5.9 Medium |
| Wasmtime is a standalone runtime for WebAssembly. There is a bug in Wasmtime's code generator, Cranelift, for AArch64 targets where constant divisors can result in incorrect division results at runtime. This affects Wasmtime prior to version 0.38.2 and Cranelift prior to 0.85.2. This issue only affects the AArch64 platform. Other platforms are not affected. The translation rules for constants did not take into account whether sign or zero-extension should happen which resulted in an incorrect value being placed into a register when a division was encountered. The impact of this bug is that programs executing within the WebAssembly sandbox would not behave according to the WebAssembly specification. This means that it is hypothetically possible for execution within the sandbox to go awry and WebAssembly programs could produce unexpected results. This should not impact hosts executing WebAssembly but does affect the correctness of guest programs. This bug has been patched in Wasmtime version 0.38.2 and cranelift-codegen 0.85.2. There are no known workarounds. | ||||
| CVE-2022-31198 | 1 Openzeppelin | 2 Contracts, Contracts Upgradeable | 2025-04-23 | 7.5 High |
| OpenZeppelin Contracts is a library for secure smart contract development. This issue concerns instances of Governor that use the module `GovernorVotesQuorumFraction`, a mechanism that determines quorum requirements as a percentage of the voting token's total supply. In affected instances, when a proposal is passed to lower the quorum requirements, past proposals may become executable if they had been defeated only due to lack of quorum, and the number of votes it received meets the new quorum requirement. Analysis of instances on chain found only one proposal that met this condition, and we are actively monitoring for new occurrences of this particular issue. This issue has been patched in v4.7.2. Users are advised to upgrade. Users unable to upgrade should consider avoiding lowering quorum requirements if a past proposal was defeated for lack of quorum. | ||||
| CVE-2022-39242 | 1 Parity | 1 Frontier | 2025-04-23 | 5.3 Medium |
| Frontier is an Ethereum compatibility layer for Substrate. Prior to commit d3beddc6911a559a3ecc9b3f08e153dbe37a8658, the worst case weight was always accounted as the block weight for all cases. In case of large EVM gas refunds, this can lead to block spamming attacks -- the adversary can construct blocks with transactions that have large amount of refunds or unused gases with reverts, and as a result inflate up the chain gas prices. The impact of this issue is limited in that the spamming attack would still be costly for any adversary, and it has no ability to alter any chain state. This issue has been patched in commit d3beddc6911a559a3ecc9b3f08e153dbe37a8658. There are no known workarounds. | ||||
| CVE-2022-23628 | 1 Openpolicyagent | 1 Open Policy Agent | 2025-04-22 | 6.3 Medium |
| OPA is an open source, general-purpose policy engine. Under certain conditions, pretty-printing an abstract syntax tree (AST) that contains synthetic nodes could change the logic of some statements by reordering array literals. Example of policies impacted are those that parse and compare web paths. **All of these** three conditions have to be met to create an adverse effect: 1. An AST of Rego had to be **created programmatically** such that it ends up containing terms without a location (such as wildcard variables). 2. The AST had to be **pretty-printed** using the `github.com/open-policy-agent/opa/format` package. 3. The result of the pretty-printing had to be **parsed and evaluated again** via an OPA instance using the bundles, or the Golang packages. If any of these three conditions are not met, you are not affected. Notably, all three would be true if using **optimized bundles**, i.e. bundles created with `opa build -O=1` or higher. In that case, the optimizer would fulfil condition (1.), the result of that would be pretty-printed when writing the bundle to disk, fulfilling (2.). When the bundle was then used, we'd satisfy (3.). As a workaround users may disable optimization when creating bundles. | ||||
| CVE-2016-10158 | 2 Php, Redhat | 2 Php, Rhel Software Collections | 2025-04-20 | N/A |
| The exif_convert_any_to_int function in ext/exif/exif.c in PHP before 5.6.30, 7.0.x before 7.0.15, and 7.1.x before 7.1.1 allows remote attackers to cause a denial of service (application crash) via crafted EXIF data that triggers an attempt to divide the minimum representable negative integer by -1. | ||||