Total
13062 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2017-9106 | 2 Fedoraproject, Gnu | 2 Fedora, Adns | 2024-11-21 | 7.5 High |
| An issue was discovered in adns before 1.5.2. adns_rr_info mishandles a bogus *datap. The general pattern for formatting integers is to sprintf into a fixed-size buffer. This is correct if the input is in the right range; if it isn't, the buffer may be overrun (depending on the sizes of the types on the current platform). Of course the inputs ought to be right. And there are pointers in there too, so perhaps one could say that the caller ought to check these things. It may be better to require the caller to make the pointer structure right, but to have the code here be defensive about (and tolerate with an error but without crashing) out-of-range integer values. So: it should defend each of these integer conversion sites with a check for the actual permitted range, and return adns_s_invaliddata if not. The lack of this check causes the SOA sign extension bug to be a serious security problem: the sign extended SOA value is out of range, and overruns the buffer when reconverted. This is related to sign extending SOA 32-bit integer fields, and use of a signed data type. | ||||
| CVE-2017-9103 | 3 Fedoraproject, Gnu, Opensuse | 3 Fedora, Adns, Leap | 2024-11-21 | 9.8 Critical |
| An issue was discovered in adns before 1.5.2. pap_mailbox822 does not properly check st from adns__findlabel_next. Without this, an uninitialised stack value can be used as the first label length. Depending on the circumstances, an attacker might be able to trick adns into crashing the calling program, leaking aspects of the contents of some of its memory, causing it to allocate lots of memory, or perhaps overrunning a buffer. This is only possible with applications which make non-raw queries for SOA or RP records. | ||||
| CVE-2017-8416 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2024-11-21 | 8.8 High |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device runs a custom daemon on UDP port 5978 which is called "dldps2121" and listens for broadcast packets sent on 255.255.255.255. This daemon handles custom D-Link UDP based protocol that allows D-Link mobile applications and desktop applications to discover D-Link devices on the local network. The binary processes the received UDP packets sent from any device in "main" function. One path in the function traverses towards a block of code that processing of packets which does an unbounded copy operation which allows to overflow the buffer. The custom protocol created by Dlink follows the following pattern: Packetlen, Type of packet; M=MAC address of device or broadcast; D=Device Type;C=base64 encoded command string;test=1111 We can see at address function starting at address 0x0000DBF8 handles the entire UDP packet and performs an insecure copy using strcpy function at address 0x0000DC88. This results in overflowing the stack pointer after 1060 characters and thus allows to control the PC register and results in code execution. The same form of communication can be initiated by any process including an attacker process on the mobile phone or the desktop and this allows a third-party application on the device to execute commands on the device without any authentication by sending just 1 UDP packet with custom base64 encoding. | ||||
| CVE-2017-8414 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2024-11-21 | 7.8 High |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary orthrus in /sbin folder of the device handles all the UPnP connections received by the device. It seems that the binary performs a sprintf operation at address 0x0000A3E4 with the value in the command line parameter "-f" and stores it on the stack. Since there is no length check, this results in corrupting the registers for the function sub_A098 which results in memory corruption. | ||||
| CVE-2017-8412 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2024-11-21 | 8.8 High |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The device has a custom binary called mp4ts under the /var/www/video folder. It seems that this binary dumps the HTTP VERB in the system logs. As a part of doing that it retrieves the HTTP VERB sent by the user and uses a vulnerable sprintf function at address 0x0000C3D4 in the function sub_C210 to copy the value into a string and then into a log file. Since there is no bounds check being performed on the environment variable at address 0x0000C360 this results in a stack overflow and overwrites the PC register allowing an attacker to execute buffer overflow or even a command injection attack. | ||||
| CVE-2017-8410 | 1 Dlink | 4 Dcs-1100, Dcs-1100 Firmware, Dcs-1130 and 1 more | 2024-11-21 | 9.8 Critical |
| An issue was discovered on D-Link DCS-1100 and DCS-1130 devices. The binary rtspd in /sbin folder of the device handles all the rtsp connections received by the device. It seems that the binary performs a memcpy operation at address 0x00011E34 with the value sent in the "Authorization: Basic" RTSP header and stores it on the stack. The number of bytes to be copied are calculated based on the length of the string sent in the RTSP header by the client. As a result, memcpy copies more data then it can hold on stack and this results in corrupting the registers for the caller function sub_F6CC which results in memory corruption. The severity of this attack is enlarged by the fact that the same value is then copied on the stack in the function 0x00011378 and this allows to overflow the buffer allocated and thus control the PC register which will result in arbitrary code execution on the device. | ||||
| CVE-2017-8336 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | N/A |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of adding new routes to the device. It seems that the POST parameters passed in this request to set up routes on the device can be set in such a way that would result in overflowing the stack set up and allow an attacker to control the $ra register stored on the stack. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST request. The POST parameter "gateway" allows to overflow the stack and control the $ra register after 1546 characters. The value from this post parameter is then copied on the stack at address 0x00421348 as shown below. This allows an attacker to provide the payload of his/her choice and finally take control of the device. | ||||
| CVE-2017-8335 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | N/A |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of setting name for wireless network. These values are stored by the device in NVRAM (Non-volatile RAM). It seems that the POST parameters passed in this request to set up names on the device do not have a string length check on them. This allows an attacker to send a large payload in the "mssid_1" POST parameter. The device also allows a user to view the name of the Wifi Network set by the user. While processing this request, the device calls a function named "getCfgToHTML" at address 0x004268A8 which retrieves the value set earlier by "mssid_1" parameter as SSID2 and this value then results in overflowing the stack set up for this function and allows an attacker to control $ra register value on the stack which allows an attacker to control the device by executing a payload of an attacker's choice. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that recieves the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST parameter "mssid_1" at address 0x0042BA00 and then sets in the NVRAM at address 0x0042C314. The value is later retrieved in the function "getCfgToHTML" at address 0x00426924 and this results in overflowing the buffer due to "strcat" function that is utilized by this function. | ||||
| CVE-2017-8329 | 1 Securifi | 6 Almond, Almond\+, Almond\+firmware and 3 more | 2024-11-21 | N/A |
| An issue was discovered on Securifi Almond, Almond+, and Almond 2015 devices with firmware AL-R096. The device provides a user with the capability of setting a name for the wireless network. These values are stored by the device in NVRAM (Non-volatile RAM). It seems that the POST parameters passed in this request to set up names on the device do not have a string length check on them. This allows an attacker to send a large payload in the "mssid_1" POST parameter. The device also allows a user to view the name of the Wifi Network set by the user. While processing this request, the device calls a function at address 0x00412CE4 (routerSummary) in the binary "webServer" located in Almond folder, which retrieves the value set earlier by "mssid_1" parameter as SSID2 and this value then results in overflowing the stack set up for this function and allows an attacker to control $ra register value on the stack which allows an attacker to control the device by executing a payload of an attacker's choice. If the firmware version AL-R096 is dissected using binwalk tool, we obtain a cpio-root archive which contains the filesystem set up on the device that contains all the binaries. The binary "goahead" is the one that has the vulnerable function that receives the values sent by the POST request. If we open this binary in IDA-pro we will notice that this follows a MIPS little endian format. The function sub_00420F38 in IDA pro is identified to be receiving the values sent in the POST parameter "mssid_1" at address 0x0042BA00 and then sets in the NVRAM at address 0x0042C314. The value is later retrieved in the function at address 0x00412EAC and this results in overflowing the buffer as the function copies the value directly on the stack. | ||||
| CVE-2017-7908 | 2 Ge, Gigasoft | 2 Ge Communicator, Proessentials | 2024-11-21 | N/A |
| A heap-based buffer overflow exists in the third-party product Gigasoft, v5 and prior, included in GE Communicator 3.15 and prior. A malicious HTML file that loads the ActiveX controls can trigger the vulnerability via unchecked function calls. | ||||
| CVE-2017-7845 | 2 Microsoft, Mozilla | 4 Windows, Firefox, Firefox Esr and 1 more | 2024-11-21 | N/A |
| A buffer overflow occurs when drawing and validating elements using Direct 3D 9 with the ANGLE graphics library, used for WebGL content. This is due to an incorrect value being passed within the library during checks and results in a potentially exploitable crash. Note: This attack only affects Windows operating systems. Other operating systems are unaffected. This vulnerability affects Thunderbird < 52.5.2, Firefox ESR < 52.5.2, and Firefox < 57.0.2. | ||||
| CVE-2017-7827 | 1 Mozilla | 1 Firefox | 2024-11-21 | N/A |
| Memory safety bugs were reported in Firefox 56. Some of these bugs showed evidence of memory corruption and we presume that with enough effort that some of these could be exploited to run arbitrary code. This vulnerability affects Firefox < 57. | ||||
| CVE-2017-7826 | 4 Canonical, Debian, Mozilla and 1 more | 11 Ubuntu Linux, Debian Linux, Firefox and 8 more | 2024-11-21 | N/A |
| Memory safety bugs were reported in Firefox 56 and Firefox ESR 52.4. Some of these bugs showed evidence of memory corruption and we presume that with enough effort that some of these could be exploited to run arbitrary code. This vulnerability affects Firefox < 57, Firefox ESR < 52.5, and Thunderbird < 52.5. | ||||
| CVE-2017-7824 | 3 Debian, Mozilla, Redhat | 10 Debian Linux, Firefox, Firefox Esr and 7 more | 2024-11-21 | N/A |
| A buffer overflow occurs when drawing and validating elements with the ANGLE graphics library, used for WebGL content. This is due to an incorrect value being passed within the library during checks and results in a potentially exploitable crash. This vulnerability affects Firefox < 56, Firefox ESR < 52.4, and Thunderbird < 52.4. | ||||
| CVE-2017-7811 | 1 Mozilla | 1 Firefox | 2024-11-21 | N/A |
| Memory safety bugs were reported in Firefox 55. Some of these bugs showed evidence of memory corruption and we presume that with enough effort that some of these could be exploited to run arbitrary code. This vulnerability affects Firefox < 56. | ||||
| CVE-2017-7810 | 4 Canonical, Debian, Mozilla and 1 more | 11 Ubuntu Linux, Debian Linux, Firefox and 8 more | 2024-11-21 | N/A |
| Memory safety bugs were reported in Firefox 55 and Firefox ESR 52.3. Some of these bugs showed evidence of memory corruption and we presume that with enough effort that some of these could be exploited to run arbitrary code. This vulnerability affects Firefox < 56, Firefox ESR < 52.4, and Thunderbird < 52.4. | ||||
| CVE-2017-7792 | 3 Debian, Mozilla, Redhat | 10 Debian Linux, Firefox, Firefox Esr and 7 more | 2024-11-21 | N/A |
| A buffer overflow will occur when viewing a certificate in the certificate manager if the certificate has an extremely long object identifier (OID). This results in a potentially exploitable crash. This vulnerability affects Thunderbird < 52.3, Firefox ESR < 52.3, and Firefox < 55. | ||||
| CVE-2017-7786 | 3 Debian, Mozilla, Redhat | 10 Debian Linux, Firefox, Firefox Esr and 7 more | 2024-11-21 | N/A |
| A buffer overflow can occur when the image renderer attempts to paint non-displayable SVG elements. This results in a potentially exploitable crash. This vulnerability affects Thunderbird < 52.3, Firefox ESR < 52.3, and Firefox < 55. | ||||
| CVE-2017-7785 | 3 Debian, Mozilla, Redhat | 10 Debian Linux, Firefox, Firefox Esr and 7 more | 2024-11-21 | N/A |
| A buffer overflow can occur when manipulating Accessible Rich Internet Applications (ARIA) attributes within the DOM. This results in a potentially exploitable crash. This vulnerability affects Thunderbird < 52.3, Firefox ESR < 52.3, and Firefox < 55. | ||||
| CVE-2017-7780 | 1 Mozilla | 1 Firefox | 2024-11-21 | N/A |
| Memory safety bugs were reported in Firefox 54. Some of these bugs showed evidence of memory corruption and we presume that with enough effort that some of these could be exploited to run arbitrary code. This vulnerability affects Firefox < 55. | ||||