{"dataType": "CVE_RECORD", "dataVersion": "5.2", "cveMetadata": {"cveId": "CVE-2024-50146", "assignerOrgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "state": "PUBLISHED", "assignerShortName": "Linux", "dateReserved": "2024-10-21T19:36:19.956Z", "datePublished": "2024-11-07T09:31:23.123Z", "dateUpdated": "2025-11-03T20:43:50.410Z"}, "containers": {"cna": {"providerMetadata": {"orgId": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "shortName": "Linux", "dateUpdated": "2025-05-04T09:47:13.967Z"}, "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet/mlx5e: Don't call cleanup on profile rollback failure\n\nWhen profile rollback fails in mlx5e_netdev_change_profile, the netdev\nprofile var is left set to NULL. Avoid a crash when unloading the driver\nby not calling profile->cleanup in such a case.\n\nThis was encountered while testing, with the original trigger that\nthe wq rescuer thread creation got interrupted (presumably due to\nCtrl+C-ing modprobe), which gets converted to ENOMEM (-12) by\nmlx5e_priv_init, the profile rollback also fails for the same reason\n(signal still active) so the profile is left as NULL, leading to a crash\nlater in _mlx5e_remove.\n\n [ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2)\n [ 734.525513] workqueue: Failed to create a rescuer kthread for wq \"mlx5e\": -EINTR\n [ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12\n [ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12\n [ 734.560153] workqueue: Failed to create a rescuer kthread for wq \"mlx5e\": -EINTR\n [ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12\n [ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12\n [ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008\n [ 745.538222] #PF: supervisor read access in kernel mode\n<snipped>\n [ 745.551290] Call Trace:\n [ 745.551590] <TASK>\n [ 745.551866] ? __die+0x20/0x60\n [ 745.552218] ? page_fault_oops+0x150/0x400\n [ 745.555307] ? exc_page_fault+0x79/0x240\n [ 745.555729] ? asm_exc_page_fault+0x22/0x30\n [ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core]\n [ 745.556698] auxiliary_bus_remove+0x18/0x30\n [ 745.557134] device_release_driver_internal+0x1df/0x240\n [ 745.557654] bus_remove_device+0xd7/0x140\n [ 745.558075] device_del+0x15b/0x3c0\n [ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core]\n [ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core]\n [ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core]\n [ 745.560203] remove_one+0x4e/0xd0 [mlx5_core]\n [ 745.560694] pci_device_remove+0x39/0xa0\n [ 745.561112] device_release_driver_internal+0x1df/0x240\n [ 745.561631] driver_detach+0x47/0x90\n [ 745.562022] bus_remove_driver+0x84/0x100\n [ 745.562444] pci_unregister_driver+0x3b/0x90\n [ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core]\n [ 745.563415] __x64_sys_delete_module+0x14d/0x2f0\n [ 745.563886] ? kmem_cache_free+0x1b0/0x460\n [ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190\n [ 745.564825] do_syscall_64+0x6d/0x140\n [ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53\n [ 745.565725] RIP: 0033:0x7f1579b1288b"}], "affected": [{"product": "Linux", "vendor": "Linux", "defaultStatus": "unaffected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c"], "versions": [{"version": "3ef14e463f6ed0218710f56b97e1a7d0448784d2", "lessThan": "db84cb4c8c565e6d4de84b23c2818b63991adfdd", "status": "affected", "versionType": "git"}, {"version": "3ef14e463f6ed0218710f56b97e1a7d0448784d2", "lessThan": "d6fe973c8873c998734a050f366b28facc03d32a", "status": "affected", "versionType": "git"}, {"version": "3ef14e463f6ed0218710f56b97e1a7d0448784d2", "lessThan": "3955b77494c3c7d14873b1db67e7e00c46a714db", "status": "affected", "versionType": "git"}, {"version": "3ef14e463f6ed0218710f56b97e1a7d0448784d2", "lessThan": "4dbc1d1a9f39c3711ad2a40addca04d07d9ab5d0", "status": "affected", "versionType": "git"}]}, {"product": "Linux", "vendor": "Linux", "defaultStatus": "affected", "repo": "https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git", "programFiles": ["drivers/net/ethernet/mellanox/mlx5/core/en_main.c"], "versions": [{"version": "5.12", "status": "affected"}, {"version": "0", "lessThan": "5.12", "status": "unaffected", "versionType": "semver"}, {"version": "6.1.123", "lessThanOrEqual": "6.1.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.6.80", "lessThanOrEqual": "6.6.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.11.6", "lessThanOrEqual": "6.11.*", "status": "unaffected", "versionType": "semver"}, {"version": "6.12", "lessThanOrEqual": "*", "status": "unaffected", "versionType": "original_commit_for_fix"}]}], "cpeApplicability": [{"nodes": [{"operator": "OR", "negate": false, "cpeMatch": [{"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.12", "versionEndExcluding": "6.1.123"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.12", "versionEndExcluding": "6.6.80"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.12", "versionEndExcluding": "6.11.6"}, {"vulnerable": true, "criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "versionStartIncluding": "5.12", "versionEndExcluding": "6.12"}]}]}], "references": [{"url": "https://git.kernel.org/stable/c/db84cb4c8c565e6d4de84b23c2818b63991adfdd"}, {"url": "https://git.kernel.org/stable/c/d6fe973c8873c998734a050f366b28facc03d32a"}, {"url": "https://git.kernel.org/stable/c/3955b77494c3c7d14873b1db67e7e00c46a714db"}, {"url": "https://git.kernel.org/stable/c/4dbc1d1a9f39c3711ad2a40addca04d07d9ab5d0"}], "title": "net/mlx5e: Don't call cleanup on profile rollback failure", "x_generator": {"engine": "bippy-1.2.0"}}, "adp": [{"title": "CVE Program Container", "references": [{"url": "https://lists.debian.org/debian-lts-announce/2025/03/msg00001.html"}], "providerMetadata": {"orgId": "af854a3a-2127-422b-91ae-364da2661108", "shortName": "CVE", "dateUpdated": "2025-11-03T20:43:50.410Z"}}]}}

{}

{"configurations": [{"nodes": [{"cpeMatch": [{"criteria": "cpe:2.3:o:linux:linux_kernel:*:*:*:*:*:*:*:*", "matchCriteriaId": "57E1EEE2-5A95-4D82-A91E-E2EB6C4FAE46", "versionEndExcluding": "6.11.6", "versionStartIncluding": "5.12", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc1:*:*:*:*:*:*", "matchCriteriaId": "7F361E1D-580F-4A2D-A509-7615F73167A1", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc2:*:*:*:*:*:*", "matchCriteriaId": "925478D0-3E3D-4E6F-ACD5-09F28D5DF82C", "vulnerable": true}, {"criteria": "cpe:2.3:o:linux:linux_kernel:6.12:rc3:*:*:*:*:*:*", "matchCriteriaId": "3C95E234-D335-4B6C-96BF-E2CEBD8654ED", "vulnerable": true}], "negate": false, "operator": "OR"}]}], "cveTags": [], "descriptions": [{"lang": "en", "value": "In the Linux kernel, the following vulnerability has been resolved:\n\nnet/mlx5e: Don't call cleanup on profile rollback failure\n\nWhen profile rollback fails in mlx5e_netdev_change_profile, the netdev\nprofile var is left set to NULL. Avoid a crash when unloading the driver\nby not calling profile->cleanup in such a case.\n\nThis was encountered while testing, with the original trigger that\nthe wq rescuer thread creation got interrupted (presumably due to\nCtrl+C-ing modprobe), which gets converted to ENOMEM (-12) by\nmlx5e_priv_init, the profile rollback also fails for the same reason\n(signal still active) so the profile is left as NULL, leading to a crash\nlater in _mlx5e_remove.\n\n [ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2)\n [ 734.525513] workqueue: Failed to create a rescuer kthread for wq \"mlx5e\": -EINTR\n [ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12\n [ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12\n [ 734.560153] workqueue: Failed to create a rescuer kthread for wq \"mlx5e\": -EINTR\n [ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12\n [ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12\n [ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008\n [ 745.538222] #PF: supervisor read access in kernel mode\n<snipped>\n [ 745.551290] Call Trace:\n [ 745.551590] <TASK>\n [ 745.551866] ? __die+0x20/0x60\n [ 745.552218] ? page_fault_oops+0x150/0x400\n [ 745.555307] ? exc_page_fault+0x79/0x240\n [ 745.555729] ? asm_exc_page_fault+0x22/0x30\n [ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core]\n [ 745.556698] auxiliary_bus_remove+0x18/0x30\n [ 745.557134] device_release_driver_internal+0x1df/0x240\n [ 745.557654] bus_remove_device+0xd7/0x140\n [ 745.558075] device_del+0x15b/0x3c0\n [ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core]\n [ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core]\n [ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core]\n [ 745.560203] remove_one+0x4e/0xd0 [mlx5_core]\n [ 745.560694] pci_device_remove+0x39/0xa0\n [ 745.561112] device_release_driver_internal+0x1df/0x240\n [ 745.561631] driver_detach+0x47/0x90\n [ 745.562022] bus_remove_driver+0x84/0x100\n [ 745.562444] pci_unregister_driver+0x3b/0x90\n [ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core]\n [ 745.563415] __x64_sys_delete_module+0x14d/0x2f0\n [ 745.563886] ? kmem_cache_free+0x1b0/0x460\n [ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190\n [ 745.564825] do_syscall_64+0x6d/0x140\n [ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53\n [ 745.565725] RIP: 0033:0x7f1579b1288b"}, {"lang": "es", "value": "En el kernel de Linux, se ha resuelto la siguiente vulnerabilidad: net/mlx5e: No llamar a cleanup en caso de fallo en la reversi\u00f3n del perfil Cuando la reversi\u00f3n del perfil falla en mlx5e_netdev_change_profile, la variable de perfil netdev se deja establecida en NULL. Evite un bloqueo al descargar el controlador al no llamar a profile-&gt;cleanup en tal caso. Esto se encontr\u00f3 durante la prueba, con el disparador original de que la creaci\u00f3n del hilo wq rescuer se interrumpi\u00f3 (presumiblemente debido a Ctrl+C-ing modprobe), que se convierte a ENOMEM (-12) por mlx5e_priv_init, la reversi\u00f3n del perfil tambi\u00e9n falla por la misma raz\u00f3n (la se\u00f1al sigue activa) por lo que el perfil se deja como NULL, lo que lleva a un bloqueo m\u00e1s adelante en _mlx5e_remove. [ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Descargar vfs: modo(OFFLOADS), nvfs(2), necvfs(0), vports(2) activos [ 734.525513] cola de trabajo: Error al crear un kthread de rescate para wq \"mlx5e\": -EINTR [ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init fall\u00f3, err=-12 [ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: nuevo Error en la inicializaci\u00f3n del perfil, -12 [734.560153] workqueue: Error al crear un kthread de rescate para wq \"mlx5e\": -EINTR [734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init fall\u00f3, err=-12 [734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: error al revertir al perfil original, -12 [745.537492] ERROR: desreferencia de puntero NULL del n\u00facleo, direcci\u00f3n: 0000000000000008 [745.538222] #PF: acceso de lectura del supervisor en modo kernel [ 745.551290] Seguimiento de llamadas: [ 745.551590] [ 745.551866] ? __die+0x20/0x60 [ 745.552218] ? page_fault_oops+0x150/0x400 [ 745.555307] ? exc_page_fault+0x79/0x240 [ 745.555729] ? asm_exc_page_fault+0x22/0x30 [ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core] [ 745.556698] bus_auxiliar_eliminar+0x18/0x30 [ 745.557134] dispositivo_liberaci\u00f3n_controlador_interno+0x1df/0x240 [ 745.557654] bus_eliminar_dispositivo+0xd7/0x140 [ 745.558075] dispositivo_del+0x15b/0x3c0 [ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core] [ 745.559112] mlx5_anular_registro_dispositivo+0x34/0x50 [mlx5_core] [ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core] [ 745.560203] remove_one+0x4e/0xd0 [mlx5_core] [ 745.560694] pci_device_remove+0x39/0xa0 [ 745.561112] device_release_driver_internal+0x1df/0x240 [ 745.561631] driver_detach+0x47/0x90 [ 745.562022] bus_remove_driver+0x84/0x100 [ 745.562444] pci_unregister_driver+0x3b/0x90 [ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core] [ 745.563415] __x64_sys_delete_module+0x14d/0x2f0 [ 745.563886] ? kmem_cache_free+0x1b0/0x460 [ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190 [ 745.564825] hacer_syscall_64+0x6d/0x140 [ 745.565223] entrada_SYSCALL_64_after_hwframe+0x4b/0x53 [ 745.565725] RIP: 0033:0x7f1579b1288b"}], "id": "CVE-2024-50146", "lastModified": "2025-11-03T21:17:02.010", "metrics": {"cvssMetricV31": [{"cvssData": {"attackComplexity": "LOW", "attackVector": "LOCAL", "availabilityImpact": "HIGH", "baseScore": 5.5, "baseSeverity": "MEDIUM", "confidentialityImpact": "NONE", "integrityImpact": "NONE", "privilegesRequired": "LOW", "scope": "UNCHANGED", "userInteraction": "NONE", "vectorString": "CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:U/C:N/I:N/A:H", "version": "3.1"}, "exploitabilityScore": 1.8, "impactScore": 3.6, "source": "nvd@nist.gov", "type": "Primary"}]}, "published": "2024-11-07T10:15:06.443", "references": [{"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/3955b77494c3c7d14873b1db67e7e00c46a714db"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "tags": ["Patch"], "url": "https://git.kernel.org/stable/c/4dbc1d1a9f39c3711ad2a40addca04d07d9ab5d0"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/d6fe973c8873c998734a050f366b28facc03d32a"}, {"source": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "url": "https://git.kernel.org/stable/c/db84cb4c8c565e6d4de84b23c2818b63991adfdd"}, {"source": "af854a3a-2127-422b-91ae-364da2661108", "url": "https://lists.debian.org/debian-lts-announce/2025/03/msg00001.html"}], "sourceIdentifier": "416baaa9-dc9f-4396-8d5f-8c081fb06d67", "vulnStatus": "Modified", "weaknesses": [{"description": [{"lang": "en", "value": "CWE-476"}], "source": "nvd@nist.gov", "type": "Primary"}]}

{"bugzilla": {"description": "kernel: net/mlx5e: Don't call cleanup on profile rollback failure", "id": "2324318", "url": "https://bugzilla.redhat.com/show_bug.cgi?id=2324318"}, "csaw": false, "cvss3": {"cvss3_base_score": "4.4", "cvss3_scoring_vector": "CVSS:3.1/AV:L/AC:L/PR:H/UI:N/S:U/C:N/I:N/A:H", "status": "draft"}, "cwe": "CWE-476", "details": ["In the Linux kernel, the following vulnerability has been resolved:\nnet/mlx5e: Don't call cleanup on profile rollback failure\nWhen profile rollback fails in mlx5e_netdev_change_profile, the netdev\nprofile var is left set to NULL. Avoid a crash when unloading the driver\nby not calling profile->cleanup in such a case.\nThis was encountered while testing, with the original trigger that\nthe wq rescuer thread creation got interrupted (presumably due to\nCtrl+C-ing modprobe), which gets converted to ENOMEM (-12) by\nmlx5e_priv_init, the profile rollback also fails for the same reason\n(signal still active) so the profile is left as NULL, leading to a crash\nlater in _mlx5e_remove.\n[ 732.473932] mlx5_core 0000:08:00.1: E-Switch: Unload vfs: mode(OFFLOADS), nvfs(2), necvfs(0), active vports(2)\n[ 734.525513] workqueue: Failed to create a rescuer kthread for wq \"mlx5e\": -EINTR\n[ 734.557372] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12\n[ 734.559187] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: new profile init failed, -12\n[ 734.560153] workqueue: Failed to create a rescuer kthread for wq \"mlx5e\": -EINTR\n[ 734.589378] mlx5_core 0000:08:00.1: mlx5e_netdev_init_profile:6235:(pid 6086): mlx5e_priv_init failed, err=-12\n[ 734.591136] mlx5_core 0000:08:00.1 eth3: mlx5e_netdev_change_profile: failed to rollback to orig profile, -12\n[ 745.537492] BUG: kernel NULL pointer dereference, address: 0000000000000008\n[ 745.538222] #PF: supervisor read access in kernel mode\n<snipped>\n[ 745.551290] Call Trace:\n[ 745.551590] <TASK>\n[ 745.551866] ? __die+0x20/0x60\n[ 745.552218] ? page_fault_oops+0x150/0x400\n[ 745.555307] ? exc_page_fault+0x79/0x240\n[ 745.555729] ? asm_exc_page_fault+0x22/0x30\n[ 745.556166] ? mlx5e_remove+0x6b/0xb0 [mlx5_core]\n[ 745.556698] auxiliary_bus_remove+0x18/0x30\n[ 745.557134] device_release_driver_internal+0x1df/0x240\n[ 745.557654] bus_remove_device+0xd7/0x140\n[ 745.558075] device_del+0x15b/0x3c0\n[ 745.558456] mlx5_rescan_drivers_locked.part.0+0xb1/0x2f0 [mlx5_core]\n[ 745.559112] mlx5_unregister_device+0x34/0x50 [mlx5_core]\n[ 745.559686] mlx5_uninit_one+0x46/0xf0 [mlx5_core]\n[ 745.560203] remove_one+0x4e/0xd0 [mlx5_core]\n[ 745.560694] pci_device_remove+0x39/0xa0\n[ 745.561112] device_release_driver_internal+0x1df/0x240\n[ 745.561631] driver_detach+0x47/0x90\n[ 745.562022] bus_remove_driver+0x84/0x100\n[ 745.562444] pci_unregister_driver+0x3b/0x90\n[ 745.562890] mlx5_cleanup+0xc/0x1b [mlx5_core]\n[ 745.563415] __x64_sys_delete_module+0x14d/0x2f0\n[ 745.563886] ? kmem_cache_free+0x1b0/0x460\n[ 745.564313] ? lockdep_hardirqs_on_prepare+0xe2/0x190\n[ 745.564825] do_syscall_64+0x6d/0x140\n[ 745.565223] entry_SYSCALL_64_after_hwframe+0x4b/0x53\n[ 745.565725] RIP: 0033:0x7f1579b1288b"], "name": "CVE-2024-50146", "package_state": [{"cpe": "cpe:/o:redhat:enterprise_linux:6", "fix_state": "Not affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 6"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Out of support scope", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:7", "fix_state": "Out of support scope", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 7"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Will not fix", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:8", "fix_state": "Will not fix", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 8"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Affected", "package_name": "kernel", "product_name": "Red Hat Enterprise Linux 9"}, {"cpe": "cpe:/o:redhat:enterprise_linux:9", "fix_state": "Will not fix", "package_name": "kernel-rt", "product_name": "Red Hat Enterprise Linux 9"}], "public_date": "2024-11-07T00:00:00Z", "references": ["https://www.cve.org/CVERecord?id=CVE-2024-50146\nhttps://nvd.nist.gov/vuln/detail/CVE-2024-50146\nhttps://lore.kernel.org/linux-cve-announce/2024110744-CVE-2024-50146-964d@gregkh/T"], "threat_severity": "Moderate"}