Total
250 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-21156 | 1 Intel | 1 Trace Analyzer And Collector | 2025-05-05 | 5.5 Medium |
| Access of uninitialized pointer in the Intel(R) Trace Analyzer and Collector before version 2021.5 may allow an authenticated user to potentially enable denial of service via local access. | ||||
| CVE-2021-29098 | 1 Esri | 4 Arcgis Engine, Arcgis Pro, Arcmap and 1 more | 2025-05-05 | 7.8 High |
| Multiple uninitialized pointer vulnerabilities when parsing a specially crafted file in Esri ArcReader, ArcGIS Desktop, ArcGIS Engine 10.8.1 (and earlier) and ArcGIS Pro 2.7 (and earlier) allow an unauthenticated attacker to achieve arbitrary code execution in the context of the current user. | ||||
| CVE-2024-57943 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix the new buffer was not zeroed before writing Before writing, if a buffer_head marked as new, its data must be zeroed, otherwise uninitialized data in the page cache will be written. So this commit uses folio_zero_new_buffers() to zero the new buffers before ->write_end(). | ||||
| CVE-2024-57874 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL Currently tagged_addr_ctrl_set() doesn't initialize the temporary 'ctrl' variable, and a SETREGSET call with a length of zero will leave this uninitialized. Consequently tagged_addr_ctrl_set() will consume an arbitrary value, potentially leaking up to 64 bits of memory from the kernel stack. The read is limited to a specific slot on the stack, and the issue does not provide a write mechanism. As set_tagged_addr_ctrl() only accepts values where bits [63:4] zero and rejects other values, a partial SETREGSET attempt will randomly succeed or fail depending on the value of the uninitialized value, and the exposure is significantly limited. Fix this by initializing the temporary value before copying the regset from userspace, as for other regsets (e.g. NT_PRSTATUS, NT_PRFPREG, NT_ARM_SYSTEM_CALL). In the case of a zero-length write, the existing value of the tagged address ctrl will be retained. The NT_ARM_TAGGED_ADDR_CTRL regset is only visible in the user_aarch64_view used by a native AArch64 task to manipulate another native AArch64 task. As get_tagged_addr_ctrl() only returns an error value when called for a compat task, tagged_addr_ctrl_get() and tagged_addr_ctrl_set() should never observe an error value from get_tagged_addr_ctrl(). Add a WARN_ON_ONCE() to both to indicate that such an error would be unexpected, and error handlnig is not missing in either case. | ||||
| CVE-2024-50100 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: USB: gadget: dummy-hcd: Fix "task hung" problem The syzbot fuzzer has been encountering "task hung" problems ever since the dummy-hcd driver was changed to use hrtimers instead of regular timers. It turns out that the problems are caused by a subtle difference between the timer_pending() and hrtimer_active() APIs. The changeover blindly replaced the first by the second. However, timer_pending() returns True when the timer is queued but not when its callback is running, whereas hrtimer_active() returns True when the hrtimer is queued _or_ its callback is running. This difference occasionally caused dummy_urb_enqueue() to think that the callback routine had not yet started when in fact it was almost finished. As a result the hrtimer was not restarted, which made it impossible for the driver to dequeue later the URB that was just enqueued. This caused usb_kill_urb() to hang, and things got worse from there. Since hrtimers have no API for telling when they are queued and the callback isn't running, the driver must keep track of this for itself. That's what this patch does, adding a new "timer_pending" flag and setting or clearing it at the appropriate times. | ||||
| CVE-2024-50088 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix uninitialized pointer free in add_inode_ref() The add_inode_ref() function does not initialize the "name" struct when it is declared. If any of the following calls to "read_one_inode() returns NULL, dir = read_one_inode(root, parent_objectid); if (!dir) { ret = -ENOENT; goto out; } inode = read_one_inode(root, inode_objectid); if (!inode) { ret = -EIO; goto out; } then "name.name" would be freed on "out" before being initialized. out: ... kfree(name.name); This issue was reported by Coverity with CID 1526744. | ||||
| CVE-2024-50087 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix uninitialized pointer free on read_alloc_one_name() error The function read_alloc_one_name() does not initialize the name field of the passed fscrypt_str struct if kmalloc fails to allocate the corresponding buffer. Thus, it is not guaranteed that fscrypt_str.name is initialized when freeing it. This is a follow-up to the linked patch that fixes the remaining instances of the bug introduced by commit e43eec81c516 ("btrfs: use struct qstr instead of name and namelen pairs"). | ||||
| CVE-2024-50031 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Stop the active perfmon before being destroyed When running `kmscube` with one or more performance monitors enabled via `GALLIUM_HUD`, the following kernel panic can occur: [ 55.008324] Unable to handle kernel paging request at virtual address 00000000052004a4 [ 55.008368] Mem abort info: [ 55.008377] ESR = 0x0000000096000005 [ 55.008387] EC = 0x25: DABT (current EL), IL = 32 bits [ 55.008402] SET = 0, FnV = 0 [ 55.008412] EA = 0, S1PTW = 0 [ 55.008421] FSC = 0x05: level 1 translation fault [ 55.008434] Data abort info: [ 55.008442] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000 [ 55.008455] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 55.008467] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 55.008481] user pgtable: 4k pages, 39-bit VAs, pgdp=00000001046c6000 [ 55.008497] [00000000052004a4] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 55.008525] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP [ 55.008542] Modules linked in: rfcomm [...] vc4 v3d snd_soc_hdmi_codec drm_display_helper gpu_sched drm_shmem_helper cec drm_dma_helper drm_kms_helper i2c_brcmstb drm drm_panel_orientation_quirks snd_soc_core snd_compress snd_pcm_dmaengine snd_pcm snd_timer snd backlight [ 55.008799] CPU: 2 PID: 166 Comm: v3d_bin Tainted: G C 6.6.47+rpt-rpi-v8 #1 Debian 1:6.6.47-1+rpt1 [ 55.008824] Hardware name: Raspberry Pi 4 Model B Rev 1.5 (DT) [ 55.008838] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 55.008855] pc : __mutex_lock.constprop.0+0x90/0x608 [ 55.008879] lr : __mutex_lock.constprop.0+0x58/0x608 [ 55.008895] sp : ffffffc080673cf0 [ 55.008904] x29: ffffffc080673cf0 x28: 0000000000000000 x27: ffffff8106188a28 [ 55.008926] x26: ffffff8101e78040 x25: ffffff8101baa6c0 x24: ffffffd9d989f148 [ 55.008947] x23: ffffffda1c2a4008 x22: 0000000000000002 x21: ffffffc080673d38 [ 55.008968] x20: ffffff8101238000 x19: ffffff8104f83188 x18: 0000000000000000 [ 55.008988] x17: 0000000000000000 x16: ffffffda1bd04d18 x15: 00000055bb08bc90 [ 55.009715] x14: 0000000000000000 x13: 0000000000000000 x12: ffffffda1bd4cbb0 [ 55.010433] x11: 00000000fa83b2da x10: 0000000000001a40 x9 : ffffffda1bd04d04 [ 55.011162] x8 : ffffff8102097b80 x7 : 0000000000000000 x6 : 00000000030a5857 [ 55.011880] x5 : 00ffffffffffffff x4 : 0300000005200470 x3 : 0300000005200470 [ 55.012598] x2 : ffffff8101238000 x1 : 0000000000000021 x0 : 0300000005200470 [ 55.013292] Call trace: [ 55.013959] __mutex_lock.constprop.0+0x90/0x608 [ 55.014646] __mutex_lock_slowpath+0x1c/0x30 [ 55.015317] mutex_lock+0x50/0x68 [ 55.015961] v3d_perfmon_stop+0x40/0xe0 [v3d] [ 55.016627] v3d_bin_job_run+0x10c/0x2d8 [v3d] [ 55.017282] drm_sched_main+0x178/0x3f8 [gpu_sched] [ 55.017921] kthread+0x11c/0x128 [ 55.018554] ret_from_fork+0x10/0x20 [ 55.019168] Code: f9400260 f1001c1f 54001ea9 927df000 (b9403401) [ 55.019776] ---[ end trace 0000000000000000 ]--- [ 55.020411] note: v3d_bin[166] exited with preempt_count 1 This issue arises because, upon closing the file descriptor (which happens when we interrupt `kmscube`), the active performance monitor is not stopped. Although all perfmons are destroyed in `v3d_perfmon_close_file()`, the active performance monitor's pointer (`v3d->active_perfmon`) is still retained. If `kmscube` is run again, the driver will attempt to stop the active performance monitor using the stale pointer in `v3d->active_perfmon`. However, this pointer is no longer valid because the previous process has already terminated, and all performance monitors associated with it have been destroyed and freed. To fix this, when the active performance monitor belongs to a given process, explicitly stop it before destroying and freeing it. | ||||
| CVE-2024-49938 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath9k_htc: Use __skb_set_length() for resetting urb before resubmit Syzbot points out that skb_trim() has a sanity check on the existing length of the skb, which can be uninitialised in some error paths. The intent here is clearly just to reset the length to zero before resubmitting, so switch to calling __skb_set_length(skb, 0) directly. In addition, __skb_set_length() already contains a call to skb_reset_tail_pointer(), so remove the redundant call. The syzbot report came from ath9k_hif_usb_reg_in_cb(), but there's a similar usage of skb_trim() in ath9k_hif_usb_rx_cb(), change both while we're at it. | ||||
| CVE-2024-46844 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: um: line: always fill *error_out in setup_one_line() The pointer isn't initialized by callers, but I have encountered cases where it's still printed; initialize it in all possible cases in setup_one_line(). | ||||
| CVE-2024-42275 | 2025-05-04 | 6.7 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/client: Fix error code in drm_client_buffer_vmap_local() This function accidentally returns zero/success on the failure path. It leads to locking issues and an uninitialized *map_copy in the caller. | ||||
| CVE-2024-42113 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: initialize num_q_vectors for MSI/INTx interrupts When using MSI/INTx interrupts, wx->num_q_vectors is uninitialized. Thus there will be kernel panic in wx_alloc_q_vectors() to allocate queue vectors. | ||||
| CVE-2024-26799 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 6.2 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: qcom: Fix uninitialized pointer dmactl In the case where __lpass_get_dmactl_handle is called and the driver id dai_id is invalid the pointer dmactl is not being assigned a value, and dmactl contains a garbage value since it has not been initialized and so the null check may not work. Fix this to initialize dmactl to NULL. One could argue that modern compilers will set this to zero, but it is useful to keep this initialized as per the same way in functions __lpass_platform_codec_intf_init and lpass_cdc_dma_daiops_hw_params. Cleans up clang scan build warning: sound/soc/qcom/lpass-cdc-dma.c:275:7: warning: Branch condition evaluates to a garbage value [core.uninitialized.Branch] | ||||
| CVE-2022-48644 | 2025-05-04 | 6.1 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: avoid disabling offload when it was never enabled In an incredibly strange API design decision, qdisc->destroy() gets called even if qdisc->init() never succeeded, not exclusively since commit 87b60cfacf9f ("net_sched: fix error recovery at qdisc creation"), but apparently also earlier (in the case of qdisc_create_dflt()). The taprio qdisc does not fully acknowledge this when it attempts full offload, because it starts off with q->flags = TAPRIO_FLAGS_INVALID in taprio_init(), then it replaces q->flags with TCA_TAPRIO_ATTR_FLAGS parsed from netlink (in taprio_change(), tail called from taprio_init()). But in taprio_destroy(), we call taprio_disable_offload(), and this determines what to do based on FULL_OFFLOAD_IS_ENABLED(q->flags). But looking at the implementation of FULL_OFFLOAD_IS_ENABLED() (a bitwise check of bit 1 in q->flags), it is invalid to call this macro on q->flags when it contains TAPRIO_FLAGS_INVALID, because that is set to U32_MAX, and therefore FULL_OFFLOAD_IS_ENABLED() will return true on an invalid set of flags. As a result, it is possible to crash the kernel if user space forces an error between setting q->flags = TAPRIO_FLAGS_INVALID, and the calling of taprio_enable_offload(). This is because drivers do not expect the offload to be disabled when it was never enabled. The error that we force here is to attach taprio as a non-root qdisc, but instead as child of an mqprio root qdisc: $ tc qdisc add dev swp0 root handle 1: \ mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc qdisc replace dev swp0 parent 1:1 \ taprio num_tc 8 map 0 1 2 3 4 5 6 7 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 base-time 0 \ sched-entry S 0x7f 990000 sched-entry S 0x80 100000 \ flags 0x0 clockid CLOCK_TAI Unable to handle kernel paging request at virtual address fffffffffffffff8 [fffffffffffffff8] pgd=0000000000000000, p4d=0000000000000000 Internal error: Oops: 96000004 [#1] PREEMPT SMP Call trace: taprio_dump+0x27c/0x310 vsc9959_port_setup_tc+0x1f4/0x460 felix_port_setup_tc+0x24/0x3c dsa_slave_setup_tc+0x54/0x27c taprio_disable_offload.isra.0+0x58/0xe0 taprio_destroy+0x80/0x104 qdisc_create+0x240/0x470 tc_modify_qdisc+0x1fc/0x6b0 rtnetlink_rcv_msg+0x12c/0x390 netlink_rcv_skb+0x5c/0x130 rtnetlink_rcv+0x1c/0x2c Fix this by keeping track of the operations we made, and undo the offload only if we actually did it. I've added "bool offloaded" inside a 4 byte hole between "int clockid" and "atomic64_t picos_per_byte". Now the first cache line looks like below: $ pahole -C taprio_sched net/sched/sch_taprio.o struct taprio_sched { struct Qdisc * * qdiscs; /* 0 8 */ struct Qdisc * root; /* 8 8 */ u32 flags; /* 16 4 */ enum tk_offsets tk_offset; /* 20 4 */ int clockid; /* 24 4 */ bool offloaded; /* 28 1 */ /* XXX 3 bytes hole, try to pack */ atomic64_t picos_per_byte; /* 32 0 */ /* XXX 8 bytes hole, try to pack */ spinlock_t current_entry_lock; /* 40 0 */ /* XXX 8 bytes hole, try to pack */ struct sched_entry * current_entry; /* 48 8 */ struct sched_gate_list * oper_sched; /* 56 8 */ /* --- cacheline 1 boundary (64 bytes) --- */ | ||||
| CVE-2021-47602 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mac80211: track only QoS data frames for admission control For admission control, obviously all of that only works for QoS data frames, otherwise we cannot even access the QoS field in the header. Syzbot reported (see below) an uninitialized value here due to a status of a non-QoS nullfunc packet, which isn't even long enough to contain the QoS header. Fix this to only do anything for QoS data packets. | ||||
| CVE-2021-47531 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/msm: Fix mmap to include VM_IO and VM_DONTDUMP In commit 510410bfc034 ("drm/msm: Implement mmap as GEM object function") we switched to a new/cleaner method of doing things. That's good, but we missed a little bit. Before that commit, we used to _first_ run through the drm_gem_mmap_obj() case where `obj->funcs->mmap()` was NULL. That meant that we ran: vma->vm_flags |= VM_IO | VM_PFNMAP | VM_DONTEXPAND | VM_DONTDUMP; vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags)); vma->vm_page_prot = pgprot_decrypted(vma->vm_page_prot); ...and _then_ we modified those mappings with our own. Now that `obj->funcs->mmap()` is no longer NULL we don't run the default code. It looks like the fact that the vm_flags got VM_IO / VM_DONTDUMP was important because we're now getting crashes on Chromebooks that use ARC++ while logging out. Specifically a crash that looks like this (this is on a 5.10 kernel w/ relevant backports but also seen on a 5.15 kernel): Unable to handle kernel paging request at virtual address ffffffc008000000 Mem abort info: ESR = 0x96000006 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000006 CM = 0, WnR = 0 swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008293d000 [ffffffc008000000] pgd=00000001002b3003, p4d=00000001002b3003, pud=00000001002b3003, pmd=0000000000000000 Internal error: Oops: 96000006 [#1] PREEMPT SMP [...] CPU: 7 PID: 15734 Comm: crash_dump64 Tainted: G W 5.10.67 #1 [...] Hardware name: Qualcomm Technologies, Inc. sc7280 IDP SKU2 platform (DT) pstate: 80400009 (Nzcv daif +PAN -UAO -TCO BTYPE=--) pc : __arch_copy_to_user+0xc0/0x30c lr : copyout+0xac/0x14c [...] Call trace: __arch_copy_to_user+0xc0/0x30c copy_page_to_iter+0x1a0/0x294 process_vm_rw_core+0x240/0x408 process_vm_rw+0x110/0x16c __arm64_sys_process_vm_readv+0x30/0x3c el0_svc_common+0xf8/0x250 do_el0_svc+0x30/0x80 el0_svc+0x10/0x1c el0_sync_handler+0x78/0x108 el0_sync+0x184/0x1c0 Code: f8408423 f80008c3 910020c6 36100082 (b8404423) Let's add the two flags back in. While we're at it, the fact that we aren't running the default means that we _don't_ need to clear out VM_PFNMAP, so remove that and save an instruction. NOTE: it was confirmed that VM_IO was the important flag to fix the problem I was seeing, but adding back VM_DONTDUMP seems like a sane thing to do so I'm doing that too. | ||||
| CVE-2021-47343 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: dm btree remove: assign new_root only when removal succeeds remove_raw() in dm_btree_remove() may fail due to IO read error (e.g. read the content of origin block fails during shadowing), and the value of shadow_spine::root is uninitialized, but the uninitialized value is still assign to new_root in the end of dm_btree_remove(). For dm-thin, the value of pmd->details_root or pmd->root will become an uninitialized value, so if trying to read details_info tree again out-of-bound memory may occur as showed below: general protection fault, probably for non-canonical address 0x3fdcb14c8d7520 CPU: 4 PID: 515 Comm: dmsetup Not tainted 5.13.0-rc6 Hardware name: QEMU Standard PC RIP: 0010:metadata_ll_load_ie+0x14/0x30 Call Trace: sm_metadata_count_is_more_than_one+0xb9/0xe0 dm_tm_shadow_block+0x52/0x1c0 shadow_step+0x59/0xf0 remove_raw+0xb2/0x170 dm_btree_remove+0xf4/0x1c0 dm_pool_delete_thin_device+0xc3/0x140 pool_message+0x218/0x2b0 target_message+0x251/0x290 ctl_ioctl+0x1c4/0x4d0 dm_ctl_ioctl+0xe/0x20 __x64_sys_ioctl+0x7b/0xb0 do_syscall_64+0x40/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixing it by only assign new_root when removal succeeds | ||||
| CVE-2023-49132 | 1 Siemens | 1 Solid Edge Se2023 | 2025-05-01 | 7.8 High |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected application is vulnerable to uninitialized pointer access while parsing specially crafted PAR files. An attacker could leverage this vulnerability to execute code in the context of the current process. | ||||
| CVE-2023-49131 | 1 Siemens | 1 Solid Edge Se2023 | 2025-05-01 | 7.8 High |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected application is vulnerable to uninitialized pointer access while parsing specially crafted PAR files. An attacker could leverage this vulnerability to execute code in the context of the current process. | ||||
| CVE-2023-49130 | 1 Siemens | 1 Solid Edge Se2023 | 2025-05-01 | 7.8 High |
| A vulnerability has been identified in Solid Edge SE2023 (All versions < V223.0 Update 10). The affected application is vulnerable to uninitialized pointer access while parsing specially crafted PAR files. An attacker could leverage this vulnerability to execute code in the context of the current process. | ||||