Filtered by vendor Oisf
Subscriptions
Filtered by product Suricata
Subscriptions
Total
59 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-22264 | 1 Oisf | 1 Suricata | 2026-01-28 | 7.4 High |
| Suricata is a network IDS, IPS and NSM engine. Prior to version 8.0.3 and 7.0.14, an unsigned integer overflow can lead to a heap use-after-free condition when generating excessive amounts of alerts for a single packet. Versions 8.0.3 and 7.0.14 contain a patch. As a workaround, do not run untrusted rulesets or run with less than 65536 signatures that can match on the same packet. | ||||
| CVE-2026-22260 | 1 Oisf | 1 Suricata | 2026-01-28 | 7.5 High |
| Suricata is a network IDS, IPS and NSM engine. Starting in version 8.0.0 and prior to version 8.0.3, Suricata can crash with a stack overflow. Version 8.0.3 patches the issue. As a workaround, use default values for `request-body-limit` and `response-body-limit`. | ||||
| CVE-2026-22263 | 1 Oisf | 1 Suricata | 2026-01-28 | 5.3 Medium |
| Suricata is a network IDS, IPS and NSM engine. Starting in version 8.0.0 and prior to version 8.0.3, inefficiency in http1 headers parsing can lead to slowdown over multiple packets. Version 8.0.3 patches the issue. No known workarounds are available. | ||||
| CVE-2026-22262 | 1 Oisf | 1 Suricata | 2026-01-28 | 5.9 Medium |
| Suricata is a network IDS, IPS and NSM engine. While saving a dataset a stack buffer is used to prepare the data. Prior to versions 8.0.3 and 7.0.14, if the data in the dataset is too large, this can result in a stack overflow. Versions 8.0.3 and 7.0.14 contain a patch. As a workaround, do not use rules with datasets `save` nor `state` options. | ||||
| CVE-2026-22261 | 1 Oisf | 1 Suricata | 2026-01-28 | 3.7 Low |
| Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, various inefficiencies in xff handling, especially for alerts not triggered in a tx, can lead to severe slowdowns. Versions 8.0.3 and 7.0.14 contain a patch. As a workaround, disable XFF support in the eve configuration. The setting is disabled by default. | ||||
| CVE-2026-22258 | 1 Oisf | 1 Suricata | 2026-01-27 | 7.5 High |
| Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, crafted DCERPC traffic can cause Suricata to expand a buffer w/o limits, leading to memory exhaustion and the process getting killed. While reported for DCERPC over UDP, it is believed that DCERPC over TCP and SMB are also vulnerable. DCERPC/TCP in the default configuration should not be vulnerable as the default stream depth is limited to 1MiB. Versions 8.0.3 and 7.0.14 contain a patch. Some workarounds are available. For DCERPC/UDP, disable the parser. For DCERPC/TCP, the `stream.reassembly.depth` setting will limit the amount of data that can be buffered. For DCERPC/SMB, the `stream.reassembly.depth` can be used as well, but is set to unlimited by default. Imposing a limit here may lead to loss of visibility in SMB. | ||||
| CVE-2026-22259 | 1 Oisf | 1 Suricata | 2026-01-27 | 7.5 High |
| Suricata is a network IDS, IPS and NSM engine. Prior to versions 8.0.3 and 7.0.14, specially crafted traffic can cause Suricata to consume large amounts of memory while parsing DNP3 traffic. This can lead to the process slowing down and running out of memory, potentially leading to it getting killed by the OOM killer. Versions 8.0.3 or 7.0.14 contain a patch. As a workaround, disable the DNP3 parser in the suricata yaml (disabled by default). | ||||
| CVE-2025-64335 | 1 Oisf | 1 Suricata | 2025-12-12 | 7.5 High |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions from 8.0.0 to before 8.0.2, a NULL dereference can occur when the entropy keyword is used in conjunction with base64_data. This issue has been patched in version 8.0.2. A workaround involves disabling rules that use entropy in conjunction with base64_data. | ||||
| CVE-2025-64331 | 1 Oisf | 1 Suricata | 2025-12-08 | 7.5 High |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Prior to versions 7.0.13 and 8.0.2, a stack overflow can occur on large HTTP file transfers if the user has increased the HTTP response body limit and enabled the logging of printable http bodies. This issue has been patched in versions 7.0.13 and 8.0.2. A workaround for this issue involves using default HTTP response body limits and/or disabling http-body-printable logging; body logging is disabled by default. | ||||
| CVE-2025-64334 | 1 Oisf | 1 Suricata | 2025-12-05 | 7.5 High |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. In versions from 8.0.0 to before 8.0.2, compressed HTTP data can lead to unbounded memory growth during decompression. This issue has been patched in version 8.0.2. A workaround involves disabling LZMA decompression or limiting response-body-limit size. | ||||
| CVE-2025-64333 | 1 Oisf | 1 Suricata | 2025-12-05 | 7.5 High |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Prior to versions 7.0.13 and 8.0.2, a large HTTP content type, when logged can cause a stack overflow crashing Suricata. This issue has been patched in versions 7.0.13 and 8.0.2. A workaround for this issue involves limiting stream.reassembly.depth to less then half the stack size. Increasing the process stack size makes it less likely the bug will trigger. | ||||
| CVE-2025-64332 | 1 Oisf | 1 Suricata | 2025-12-05 | 7.5 High |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Prior to versions 7.0.13 and 8.0.2, a stack overflow that causes Suricata to crash can occur if SWF decompression is enabled. This issue has been patched in versions 7.0.13 and 8.0.2. A workaround for this issue involves disabling SWF decompression (swf-decompression in suricata.yaml), it is disabled by default; set decompress-depth to lower than half your stack size if swf-decompression must be enabled. | ||||
| CVE-2025-64330 | 1 Oisf | 1 Suricata | 2025-12-05 | 7.5 High |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Prior to versions 7.0.13 and 8.0.2, a single byte read heap overflow when logging the verdict in eve.alert and eve.drop records can lead to crashes. This requires the per packet alert queue to be filled with alerts and then followed by a pass rule. This issue has been patched in versions 7.0.13 and 8.0.2. To reduce the likelihood of this issue occurring, the alert queue size a should be increased (packet-alert-max in suricata.yaml) if verdict is enabled. | ||||
| CVE-2025-64344 | 1 Oisf | 1 Suricata | 2025-12-03 | 7.5 High |
| Suricata is a network IDS, IPS and NSM engine developed by the OISF (Open Information Security Foundation) and the Suricata community. Prior to versions 7.0.13 and 8.0.2, working with large buffers in Lua scripts can lead to a stack overflow. Users of Lua rules and output scripts may be affected when working with large buffers. This includes a rule passing a large buffer to a Lua script. This issue has been patched in versions 7.0.13 and 8.0.2. A workaround for this issue involves disabling Lua rules and output scripts, or making sure limits, such as stream.depth.reassembly and HTTP response body limits (response-body-limit), are set to less than half the stack size. | ||||
| CVE-2025-29918 | 1 Oisf | 1 Suricata | 2025-11-03 | 6.2 Medium |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. A PCRE rule can be written that leads to an infinite loop when negated PCRE is used. Packet processing thread becomes stuck in infinite loop limiting visibility and availability in inline mode. This vulnerability is fixed in 7.0.9. | ||||
| CVE-2024-55626 | 1 Oisf | 1 Suricata | 2025-11-03 | 3.3 Low |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.8, a large BPF filter file provided to Suricata at startup can lead to a buffer overflow at Suricata startup. The issue has been addressed in Suricata 7.0.8. | ||||
| CVE-2024-45796 | 1 Oisf | 1 Suricata | 2025-11-03 | 5.3 Medium |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to version 7.0.7, a logic error during fragment reassembly can lead to failed reassembly for valid traffic. An attacker could craft packets to trigger this behavior.This issue has been addressed in 7.0.7. | ||||
| CVE-2024-37151 | 1 Oisf | 1 Suricata | 2025-11-03 | 5.3 Medium |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Mishandling of multiple fragmented packets using the same IP ID value can lead to packet reassembly failure, which can lead to policy bypass. Upgrade to 7.0.6 or 6.0.20. When using af-packet, enable `defrag` to reduce the scope of the problem. | ||||
| CVE-2024-32663 | 1 Oisf | 1 Suricata | 2025-11-03 | 7.5 High |
| Suricata is a network Intrusion Detection System, Intrusion Prevention System and Network Security Monitoring engine. Prior to 7.0.5 and 6.0.19, a small amount of HTTP/2 traffic can lead to Suricata using a large amount of memory. The issue has been addressed in Suricata 7.0.5 and 6.0.19. Workarounds include disabling the HTTP/2 parser and reducing `app-layer.protocols.http2.max-table-size` value (default is 65536). | ||||
| CVE-2023-35852 | 1 Oisf | 1 Suricata | 2025-11-03 | 7.5 High |
| In Suricata before 6.0.13 (when there is an adversary who controls an external source of rules), a dataset filename, that comes from a rule, may trigger absolute or relative directory traversal, and lead to write access to a local filesystem. This is addressed in 6.0.13 by requiring allow-absolute-filenames and allow-write (in the datasets rules configuration section) if an installation requires traversal/writing in this situation. | ||||