Filtered by vendor Linux
Subscriptions
Total
15360 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-38429 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bus: mhi: ep: Update read pointer only after buffer is written Inside mhi_ep_ring_add_element, the read pointer (rd_offset) is updated before the buffer is written, potentially causing race conditions where the host sees an updated read pointer before the buffer is actually written. Updating rd_offset prematurely can lead to the host accessing an uninitialized or incomplete element, resulting in data corruption. Invoke the buffer write before updating rd_offset to ensure the element is fully written before signaling its availability. | ||||
| CVE-2025-38427 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: video: screen_info: Relocate framebuffers behind PCI bridges Apply PCI host-bridge window offsets to screen_info framebuffers. Fixes invalid access to I/O memory. Resources behind a PCI host bridge can be relocated by a certain offset in the kernel's CPU address range used for I/O. The framebuffer memory range stored in screen_info refers to the CPU addresses as seen during boot (where the offset is 0). During boot up, firmware may assign a different memory offset to the PCI host bridge and thereby relocating the framebuffer address of the PCI graphics device as seen by the kernel. The information in screen_info must be updated as well. The helper pcibios_bus_to_resource() performs the relocation of the screen_info's framebuffer resource (given in PCI bus addresses). The result matches the I/O-memory resource of the PCI graphics device (given in CPU addresses). As before, we store away the information necessary to later update the information in screen_info itself. Commit 78aa89d1dfba ("firmware/sysfb: Update screen_info for relocated EFI framebuffers") added the code for updating screen_info. It is based on similar functionality that pre-existed in efifb. Efifb uses a pointer to the PCI resource, while the newer code does a memcpy of the region. Hence efifb sees any updates to the PCI resource and avoids the issue. v3: - Only use struct pci_bus_region for PCI bus addresses (Bjorn) - Clarify address semantics in commit messages and comments (Bjorn) v2: - Fixed tags (Takashi, Ivan) - Updated information on efifb | ||||
| CVE-2025-38426 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Add basic validation for RAS header If RAS header read from EEPROM is corrupted, it could result in trying to allocate huge memory for reading the records. Add some validation to header fields. | ||||
| CVE-2025-38423 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: wcd9375: Fix double free of regulator supplies Driver gets regulator supplies in probe path with devm_regulator_bulk_get(), so should not call regulator_bulk_free() in error and remove paths to avoid double free. | ||||
| CVE-2025-38421 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86/amd: pmf: Use device managed allocations If setting up smart PC fails for any reason then this can lead to a double free when unloading amd-pmf. This is because dev->buf was freed but never set to NULL and is again freed in amd_pmf_remove(). To avoid subtle allocation bugs in failures leading to a double free change all allocations into device managed allocations. | ||||
| CVE-2025-38417 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: fix eswitch code memory leak in reset scenario Add simple eswitch mode checker in attaching VF procedure and allocate required port representor memory structures only in switchdev mode. The reset flows triggers VF (if present) detach/attach procedure. It might involve VF port representor(s) re-creation if the device is configured is switchdev mode (not legacy one). The memory was blindly allocated in current implementation, regardless of the mode and not freed if in legacy mode. Kmemeleak trace: unreferenced object (percpu) 0x7e3bce5b888458 (size 40): comm "bash", pid 1784, jiffies 4295743894 hex dump (first 32 bytes on cpu 45): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace (crc 0): pcpu_alloc_noprof+0x4c4/0x7c0 ice_repr_create+0x66/0x130 [ice] ice_repr_create_vf+0x22/0x70 [ice] ice_eswitch_attach_vf+0x1b/0xa0 [ice] ice_reset_all_vfs+0x1dd/0x2f0 [ice] ice_pci_err_resume+0x3b/0xb0 [ice] pci_reset_function+0x8f/0x120 reset_store+0x56/0xa0 kernfs_fop_write_iter+0x120/0x1b0 vfs_write+0x31c/0x430 ksys_write+0x61/0xd0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e Testing hints (ethX is PF netdev): - create at least one VF echo 1 > /sys/class/net/ethX/device/sriov_numvfs - trigger the reset echo 1 > /sys/class/net/ethX/device/reset | ||||
| CVE-2025-38414 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix GCC_GCC_PCIE_HOT_RST definition for WCN7850 GCC_GCC_PCIE_HOT_RST is wrongly defined for WCN7850, causing kernel crash on some specific platforms. Since this register is divergent for WCN7850 and QCN9274, move it to register table to allow different definitions. Then correct the register address for WCN7850 to fix this issue. Note IPQ5332 is not affected as it is not PCIe based device. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3 | ||||
| CVE-2025-38413 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: virtio-net: xsk: rx: fix the frame's length check When calling buf_to_xdp, the len argument is the frame data's length without virtio header's length (vi->hdr_len). We check that len with xsk_pool_get_rx_frame_size() + vi->hdr_len to ensure the provided len does not larger than the allocated chunk size. The additional vi->hdr_len is because in virtnet_add_recvbuf_xsk, we use part of XDP_PACKET_HEADROOM for virtio header and ask the vhost to start placing data from hard_start + XDP_PACKET_HEADROOM - vi->hdr_len not hard_start + XDP_PACKET_HEADROOM But the first buffer has virtio_header, so the maximum frame's length in the first buffer can only be xsk_pool_get_rx_frame_size() not xsk_pool_get_rx_frame_size() + vi->hdr_len like in the current check. This commit adds an additional argument to buf_to_xdp differentiate between the first buffer and other ones to correctly calculate the maximum frame's length. | ||||
| CVE-2025-38411 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix double put of request If a netfs request finishes during the pause loop, it will have the ref that belongs to the IN_PROGRESS flag removed at that point - however, if it then goes to the final wait loop, that will *also* put the ref because it sees that the IN_PROGRESS flag is clear and incorrectly assumes that this happened when it called the collector. In fact, since IN_PROGRESS is clear, we shouldn't call the collector again since it's done all the cleanup, such as calling ->ki_complete(). Fix this by making netfs_collect_in_app() just return, indicating that we're done if IN_PROGRESS is removed. | ||||
| CVE-2025-38408 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: genirq/irq_sim: Initialize work context pointers properly Initialize `ops` member's pointers properly by using kzalloc() instead of kmalloc() when allocating the simulation work context. Otherwise the pointers contain random content leading to invalid dereferencing. | ||||
| CVE-2025-38407 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: cpu_ops_sbi: Use static array for boot_data Since commit 6b9f29b81b15 ("riscv: Enable pcpu page first chunk allocator"), if NUMA is enabled, the page percpu allocator may be used on very sparse configurations, or when requested on boot with percpu_alloc=page. In that case, percpu data gets put in the vmalloc area. However, sbi_hsm_hart_start() needs the physical address of a sbi_hart_boot_data, and simply assumes that __pa() would work. This causes the just started hart to immediately access an invalid address and hang. Fortunately, struct sbi_hart_boot_data is not too large, so we can simply allocate an array for boot_data statically, putting it in the kernel image. This fixes NUMA=y SMP boot on Sophgo SG2042. To reproduce on QEMU: Set CONFIG_NUMA=y and CONFIG_DEBUG_VIRTUAL=y, then run with: qemu-system-riscv64 -M virt -smp 2 -nographic \ -kernel arch/riscv/boot/Image \ -append "percpu_alloc=page" Kernel output: [ 0.000000] Booting Linux on hartid 0 [ 0.000000] Linux version 6.16.0-rc1 (dram@sakuya) (riscv64-unknown-linux-gnu-gcc (GCC) 14.2.1 20250322, GNU ld (GNU Binutils) 2.44) #11 SMP Tue Jun 24 14:56:22 CST 2025 ... [ 0.000000] percpu: 28 4K pages/cpu s85784 r8192 d20712 ... [ 0.083192] smp: Bringing up secondary CPUs ... [ 0.086722] ------------[ cut here ]------------ [ 0.086849] virt_to_phys used for non-linear address: (____ptrval____) (0xff2000000001d080) [ 0.088001] WARNING: CPU: 0 PID: 1 at arch/riscv/mm/physaddr.c:14 __virt_to_phys+0xae/0xe8 [ 0.088376] Modules linked in: [ 0.088656] CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.16.0-rc1 #11 NONE [ 0.088833] Hardware name: riscv-virtio,qemu (DT) [ 0.088948] epc : __virt_to_phys+0xae/0xe8 [ 0.089001] ra : __virt_to_phys+0xae/0xe8 [ 0.089037] epc : ffffffff80021eaa ra : ffffffff80021eaa sp : ff2000000004bbc0 [ 0.089057] gp : ffffffff817f49c0 tp : ff60000001d60000 t0 : 5f6f745f74726976 [ 0.089076] t1 : 0000000000000076 t2 : 705f6f745f747269 s0 : ff2000000004bbe0 [ 0.089095] s1 : ff2000000001d080 a0 : 0000000000000000 a1 : 0000000000000000 [ 0.089113] a2 : 0000000000000000 a3 : 0000000000000000 a4 : 0000000000000000 [ 0.089131] a5 : 0000000000000000 a6 : 0000000000000000 a7 : 0000000000000000 [ 0.089155] s2 : ffffffff8130dc00 s3 : 0000000000000001 s4 : 0000000000000001 [ 0.089174] s5 : ffffffff8185eff8 s6 : ff2000007f1eb000 s7 : ffffffff8002a2ec [ 0.089193] s8 : 0000000000000001 s9 : 0000000000000001 s10: 0000000000000000 [ 0.089211] s11: 0000000000000000 t3 : ffffffff8180a9f7 t4 : ffffffff8180a9f7 [ 0.089960] t5 : ffffffff8180a9f8 t6 : ff2000000004b9d8 [ 0.089984] status: 0000000200000120 badaddr: ffffffff80021eaa cause: 0000000000000003 [ 0.090101] [<ffffffff80021eaa>] __virt_to_phys+0xae/0xe8 [ 0.090228] [<ffffffff8001d796>] sbi_cpu_start+0x6e/0xe8 [ 0.090247] [<ffffffff8001a5da>] __cpu_up+0x1e/0x8c [ 0.090260] [<ffffffff8002a32e>] bringup_cpu+0x42/0x258 [ 0.090277] [<ffffffff8002914c>] cpuhp_invoke_callback+0xe0/0x40c [ 0.090292] [<ffffffff800294e0>] __cpuhp_invoke_callback_range+0x68/0xfc [ 0.090320] [<ffffffff8002a96a>] _cpu_up+0x11a/0x244 [ 0.090334] [<ffffffff8002aae6>] cpu_up+0x52/0x90 [ 0.090384] [<ffffffff80c09350>] bringup_nonboot_cpus+0x78/0x118 [ 0.090411] [<ffffffff80c11060>] smp_init+0x34/0xb8 [ 0.090425] [<ffffffff80c01220>] kernel_init_freeable+0x148/0x2e4 [ 0.090442] [<ffffffff80b83802>] kernel_init+0x1e/0x14c [ 0.090455] [<ffffffff800124ca>] ret_from_fork_kernel+0xe/0xf0 [ 0.090471] [<ffffffff80b8d9c2>] ret_from_fork_kernel_asm+0x16/0x18 [ 0.090560] ---[ end trace 0000000000000000 ]--- [ 1.179875] CPU1: failed to come online [ 1.190324] smp: Brought up 1 node, 1 CPU | ||||
| CVE-2025-38405 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix memory leak of bio integrity If nvmet receives commands with metadata there is a continuous memory leak of kmalloc-128 slab or more precisely bio->bi_integrity. Since commit bf4c89fc8797 ("block: don't call bio_uninit from bio_endio") each user of bio_init has to use bio_uninit as well. Otherwise the bio integrity is not getting free. Nvmet uses bio_init for inline bios. Uninit the inline bio to complete deallocation of integrity in bio. | ||||
| CVE-2025-38402 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: return 0 size for RSS key if not supported Returning -EOPNOTSUPP from function returning u32 is leading to cast and invalid size value as a result. -EOPNOTSUPP as a size probably will lead to allocation fail. Command: ethtool -x eth0 It is visible on all devices that don't have RSS caps set. [ 136.615917] Call Trace: [ 136.615921] <TASK> [ 136.615927] ? __warn+0x89/0x130 [ 136.615942] ? __alloc_frozen_pages_noprof+0x322/0x330 [ 136.615953] ? report_bug+0x164/0x190 [ 136.615968] ? handle_bug+0x58/0x90 [ 136.615979] ? exc_invalid_op+0x17/0x70 [ 136.615987] ? asm_exc_invalid_op+0x1a/0x20 [ 136.616001] ? rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616016] ? __alloc_frozen_pages_noprof+0x322/0x330 [ 136.616028] __alloc_pages_noprof+0xe/0x20 [ 136.616038] ___kmalloc_large_node+0x80/0x110 [ 136.616072] __kmalloc_large_node_noprof+0x1d/0xa0 [ 136.616081] __kmalloc_noprof+0x32c/0x4c0 [ 136.616098] ? rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616105] rss_prepare_get.constprop.0+0xb9/0x170 [ 136.616114] ethnl_default_doit+0x107/0x3d0 [ 136.616131] genl_family_rcv_msg_doit+0x100/0x160 [ 136.616147] genl_rcv_msg+0x1b8/0x2c0 [ 136.616156] ? __pfx_ethnl_default_doit+0x10/0x10 [ 136.616168] ? __pfx_genl_rcv_msg+0x10/0x10 [ 136.616176] netlink_rcv_skb+0x58/0x110 [ 136.616186] genl_rcv+0x28/0x40 [ 136.616195] netlink_unicast+0x19b/0x290 [ 136.616206] netlink_sendmsg+0x222/0x490 [ 136.616215] __sys_sendto+0x1fd/0x210 [ 136.616233] __x64_sys_sendto+0x24/0x30 [ 136.616242] do_syscall_64+0x82/0x160 [ 136.616252] ? __sys_recvmsg+0x83/0xe0 [ 136.616265] ? syscall_exit_to_user_mode+0x10/0x210 [ 136.616275] ? do_syscall_64+0x8e/0x160 [ 136.616282] ? __count_memcg_events+0xa1/0x130 [ 136.616295] ? count_memcg_events.constprop.0+0x1a/0x30 [ 136.616306] ? handle_mm_fault+0xae/0x2d0 [ 136.616319] ? do_user_addr_fault+0x379/0x670 [ 136.616328] ? clear_bhb_loop+0x45/0xa0 [ 136.616340] ? clear_bhb_loop+0x45/0xa0 [ 136.616349] ? clear_bhb_loop+0x45/0xa0 [ 136.616359] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 136.616369] RIP: 0033:0x7fd30ba7b047 [ 136.616376] Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 80 3d bd d5 0c 00 00 41 89 ca 74 10 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 71 c3 55 48 83 ec 30 44 89 4c 24 2c 4c 89 44 [ 136.616381] RSP: 002b:00007ffde1796d68 EFLAGS: 00000202 ORIG_RAX: 000000000000002c [ 136.616388] RAX: ffffffffffffffda RBX: 000055d7bd89f2a0 RCX: 00007fd30ba7b047 [ 136.616392] RDX: 0000000000000028 RSI: 000055d7bd89f3b0 RDI: 0000000000000003 [ 136.616396] RBP: 00007ffde1796e10 R08: 00007fd30bb4e200 R09: 000000000000000c [ 136.616399] R10: 0000000000000000 R11: 0000000000000202 R12: 000055d7bd89f340 [ 136.616403] R13: 000055d7bd89f3b0 R14: 000055d78943f200 R15: 0000000000000000 | ||||
| CVE-2025-38398 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-qpic-snand: reallocate BAM transactions Using the mtd_nandbiterrs module for testing the driver occasionally results in weird things like below. 1. swiotlb mapping fails with the following message: [ 85.926216] qcom_snand 79b0000.spi: swiotlb buffer is full (sz: 4294967294 bytes), total 512 (slots), used 0 (slots) [ 85.932937] qcom_snand 79b0000.spi: failure in mapping desc [ 87.999314] qcom_snand 79b0000.spi: failure to write raw page [ 87.999352] mtd_nandbiterrs: error: write_oob failed (-110) Rebooting the board after this causes a panic due to a NULL pointer dereference. 2. If the swiotlb mapping does not fail, rebooting the board may result in a different panic due to a bad spinlock magic: [ 256.104459] BUG: spinlock bad magic on CPU#3, procd/2241 [ 256.104488] Unable to handle kernel paging request at virtual address ffffffff0000049b ... Investigating the issue revealed that these symptoms are results of memory corruption which is caused by out of bounds access within the driver. The driver uses a dynamically allocated structure for BAM transactions, which structure must have enough space for all possible variations of different flash operations initiated by the driver. The required space heavily depends on the actual number of 'codewords' which is calculated from the pagesize of the actual NAND chip. Although the qcom_nandc_alloc() function allocates memory for the BAM transactions during probe, but since the actual number of 'codewords' is not yet know the allocation is done for one 'codeword' only. Because of this, whenever the driver does a flash operation, and the number of the required transactions exceeds the size of the allocated arrays the driver accesses memory out of the allocated range. To avoid this, change the code to free the initially allocated BAM transactions memory, and allocate a new one once the actual number of 'codewords' required for a given NAND chip is known. | ||||
| CVE-2025-38432 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: netpoll: Initialize UDP checksum field before checksumming commit f1fce08e63fe ("netpoll: Eliminate redundant assignment") removed the initialization of the UDP checksum, which was wrong and broke netpoll IPv6 transmission due to bad checksumming. udph->check needs to be set before calling csum_ipv6_magic(). | ||||
| CVE-2025-38442 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block: reject bs > ps block devices when THP is disabled If THP is disabled and when a block device with logical block size > page size is present, the following null ptr deref panic happens during boot: [ [13.2 mK AOSAN: null-ptr-deref in range [0x0000000000000000-0x0000000000K0 0 0[07] [ 13.017749] RIP: 0010:create_empty_buffers+0x3b/0x380 <snip> [ 13.025448] Call Trace: [ 13.025692] <TASK> [ 13.025895] block_read_full_folio+0x610/0x780 [ 13.026379] ? __pfx_blkdev_get_block+0x10/0x10 [ 13.027008] ? __folio_batch_add_and_move+0x1fa/0x2b0 [ 13.027548] ? __pfx_blkdev_read_folio+0x10/0x10 [ 13.028080] filemap_read_folio+0x9b/0x200 [ 13.028526] ? __pfx_filemap_read_folio+0x10/0x10 [ 13.029030] ? __filemap_get_folio+0x43/0x620 [ 13.029497] do_read_cache_folio+0x155/0x3b0 [ 13.029962] ? __pfx_blkdev_read_folio+0x10/0x10 [ 13.030381] read_part_sector+0xb7/0x2a0 [ 13.030805] read_lba+0x174/0x2c0 <snip> [ 13.045348] nvme_scan_ns+0x684/0x850 [nvme_core] [ 13.045858] ? __pfx_nvme_scan_ns+0x10/0x10 [nvme_core] [ 13.046414] ? _raw_spin_unlock+0x15/0x40 [ 13.046843] ? __switch_to+0x523/0x10a0 [ 13.047253] ? kvm_clock_get_cycles+0x14/0x30 [ 13.047742] ? __pfx_nvme_scan_ns_async+0x10/0x10 [nvme_core] [ 13.048353] async_run_entry_fn+0x96/0x4f0 [ 13.048787] process_one_work+0x667/0x10a0 [ 13.049219] worker_thread+0x63c/0xf60 As large folio support depends on THP, only allow bs > ps block devices if THP is enabled. | ||||
| CVE-2025-38440 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix race between DIM disable and net_dim() There's a race between disabling DIM and NAPI callbacks using the dim pointer on the RQ or SQ. If NAPI checks the DIM state bit and sees it still set, it assumes `rq->dim` or `sq->dim` is valid. But if DIM gets disabled right after that check, the pointer might already be set to NULL, leading to a NULL pointer dereference in net_dim(). Fix this by calling `synchronize_net()` before freeing the DIM context. This ensures all in-progress NAPI callbacks are finished before the pointer is cleared. Kernel log: BUG: kernel NULL pointer dereference, address: 0000000000000000 ... RIP: 0010:net_dim+0x23/0x190 ... Call Trace: <TASK> ? __die+0x20/0x60 ? page_fault_oops+0x150/0x3e0 ? common_interrupt+0xf/0xa0 ? sysvec_call_function_single+0xb/0x90 ? exc_page_fault+0x74/0x130 ? asm_exc_page_fault+0x22/0x30 ? net_dim+0x23/0x190 ? mlx5e_poll_ico_cq+0x41/0x6f0 [mlx5_core] ? sysvec_apic_timer_interrupt+0xb/0x90 mlx5e_handle_rx_dim+0x92/0xd0 [mlx5_core] mlx5e_napi_poll+0x2cd/0xac0 [mlx5_core] ? mlx5e_poll_ico_cq+0xe5/0x6f0 [mlx5_core] busy_poll_stop+0xa2/0x200 ? mlx5e_napi_poll+0x1d9/0xac0 [mlx5_core] ? mlx5e_trigger_irq+0x130/0x130 [mlx5_core] __napi_busy_loop+0x345/0x3b0 ? sysvec_call_function_single+0xb/0x90 ? asm_sysvec_call_function_single+0x16/0x20 ? sysvec_apic_timer_interrupt+0xb/0x90 ? pcpu_free_area+0x1e4/0x2e0 napi_busy_loop+0x11/0x20 xsk_recvmsg+0x10c/0x130 sock_recvmsg+0x44/0x70 __sys_recvfrom+0xbc/0x130 ? __schedule+0x398/0x890 __x64_sys_recvfrom+0x20/0x30 do_syscall_64+0x4c/0x100 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ... ---[ end trace 0000000000000000 ]--- ... ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- | ||||
| CVE-2025-38438 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: Intel: hda: Use devm_kstrdup() to avoid memleak. sof_pdata->tplg_filename can have address allocated by kstrdup() and can be overwritten. Memory leak was detected with kmemleak: unreferenced object 0xffff88812391ff60 (size 16): comm "kworker/4:1", pid 161, jiffies 4294802931 hex dump (first 16 bytes): 73 6f 66 2d 68 64 61 2d 67 65 6e 65 72 69 63 00 sof-hda-generic. backtrace (crc 4bf1675c): __kmalloc_node_track_caller_noprof+0x49c/0x6b0 kstrdup+0x46/0xc0 hda_machine_select.cold+0x1de/0x12cf [snd_sof_intel_hda_generic] sof_init_environment+0x16f/0xb50 [snd_sof] sof_probe_continue+0x45/0x7c0 [snd_sof] sof_probe_work+0x1e/0x40 [snd_sof] process_one_work+0x894/0x14b0 worker_thread+0x5e5/0xfb0 kthread+0x39d/0x760 ret_from_fork+0x31/0x70 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2025-38436 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/scheduler: signal scheduled fence when kill job When an entity from application B is killed, drm_sched_entity_kill() removes all jobs belonging to that entity through drm_sched_entity_kill_jobs_work(). If application A's job depends on a scheduled fence from application B's job, and that fence is not properly signaled during the killing process, application A's dependency cannot be cleared. This leads to application A hanging indefinitely while waiting for a dependency that will never be resolved. Fix this issue by ensuring that scheduled fences are properly signaled when an entity is killed, allowing dependent applications to continue execution. | ||||
| CVE-2025-38435 | 1 Linux | 1 Linux Kernel | 2025-11-19 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: vector: Fix context save/restore with xtheadvector Previously only v0-v7 were correctly saved/restored, and the context of v8-v31 are damanged. Correctly save/restore v8-v31 to avoid breaking userspace. | ||||