Total
572 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-40908 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: bpf: Set run context for rawtp test_run callback syzbot reported crash when rawtp program executed through the test_run interface calls bpf_get_attach_cookie helper or any other helper that touches task->bpf_ctx pointer. Setting the run context (task->bpf_ctx pointer) for test_run callback. | ||||
| CVE-2024-39507 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hns3: fix kernel crash problem in concurrent scenario When link status change, the nic driver need to notify the roce driver to handle this event, but at this time, the roce driver may uninit, then cause kernel crash. To fix the problem, when link status change, need to check whether the roce registered, and when uninit, need to wait link update finish. | ||||
| CVE-2024-38538 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: bridge: xmit: make sure we have at least eth header len bytes syzbot triggered an uninit value[1] error in bridge device's xmit path by sending a short (less than ETH_HLEN bytes) skb. To fix it check if we can actually pull that amount instead of assuming. Tested with dropwatch: drop at: br_dev_xmit+0xb93/0x12d0 [bridge] (0xffffffffc06739b3) origin: software timestamp: Mon May 13 11:31:53 2024 778214037 nsec protocol: 0x88a8 length: 2 original length: 2 drop reason: PKT_TOO_SMALL [1] BUG: KMSAN: uninit-value in br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 br_dev_xmit+0x61d/0x1cb0 net/bridge/br_device.c:65 __netdev_start_xmit include/linux/netdevice.h:4903 [inline] netdev_start_xmit include/linux/netdevice.h:4917 [inline] xmit_one net/core/dev.c:3531 [inline] dev_hard_start_xmit+0x247/0xa20 net/core/dev.c:3547 __dev_queue_xmit+0x34db/0x5350 net/core/dev.c:4341 dev_queue_xmit include/linux/netdevice.h:3091 [inline] __bpf_tx_skb net/core/filter.c:2136 [inline] __bpf_redirect_common net/core/filter.c:2180 [inline] __bpf_redirect+0x14a6/0x1620 net/core/filter.c:2187 ____bpf_clone_redirect net/core/filter.c:2460 [inline] bpf_clone_redirect+0x328/0x470 net/core/filter.c:2432 ___bpf_prog_run+0x13fe/0xe0f0 kernel/bpf/core.c:1997 __bpf_prog_run512+0xb5/0xe0 kernel/bpf/core.c:2238 bpf_dispatcher_nop_func include/linux/bpf.h:1234 [inline] __bpf_prog_run include/linux/filter.h:657 [inline] bpf_prog_run include/linux/filter.h:664 [inline] bpf_test_run+0x499/0xc30 net/bpf/test_run.c:425 bpf_prog_test_run_skb+0x14ea/0x1f20 net/bpf/test_run.c:1058 bpf_prog_test_run+0x6b7/0xad0 kernel/bpf/syscall.c:4269 __sys_bpf+0x6aa/0xd90 kernel/bpf/syscall.c:5678 __do_sys_bpf kernel/bpf/syscall.c:5767 [inline] __se_sys_bpf kernel/bpf/syscall.c:5765 [inline] __x64_sys_bpf+0xa0/0xe0 kernel/bpf/syscall.c:5765 x64_sys_call+0x96b/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:322 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2024-36923 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/9p: fix uninitialized values during inode evict If an iget fails due to not being able to retrieve information from the server then the inode structure is only partially initialized. When the inode gets evicted, references to uninitialized structures (like fscache cookies) were being made. This patch checks for a bad_inode before doing anything other than clearing the inode from the cache. Since the inode is bad, it shouldn't have any state associated with it that needs to be written back (and there really isn't a way to complete those anyways). | ||||
| CVE-2024-36022 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Init zone device and drm client after mode-1 reset on reload In passthrough environment, when amdgpu is reloaded after unload, mode-1 is triggered after initializing the necessary IPs, That init does not include KFD, and KFD init waits until the reset is completed. KFD init is called in the reset handler, but in this case, the zone device and drm client is not initialized, causing app to create kernel panic. v2: Removing the init KFD condition from amdgpu_amdkfd_drm_client_create. As the previous version has the potential of creating DRM client twice. v3: v2 patch results in SDMA engine hung as DRM open causes VM clear to SDMA before SDMA init. Adding the condition to in drm client creation, on top of v1, to guard against drm client creation call multiple times. | ||||
| CVE-2024-35915 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet syzbot reported the following uninit-value access issue [1][2]: nci_rx_work() parses and processes received packet. When the payload length is zero, each message type handler reads uninitialized payload and KMSAN detects this issue. The receipt of a packet with a zero-size payload is considered unexpected, and therefore, such packets should be silently discarded. This patch resolved this issue by checking payload size before calling each message type handler codes. | ||||
| CVE-2024-35849 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix information leak in btrfs_ioctl_logical_to_ino() Syzbot reported the following information leak for in btrfs_ioctl_logical_to_ino(): BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x110 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x110 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] btrfs_ioctl_logical_to_ino+0x440/0x750 fs/btrfs/ioctl.c:3499 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Uninit was created at: __kmalloc_large_node+0x231/0x370 mm/slub.c:3921 __do_kmalloc_node mm/slub.c:3954 [inline] __kmalloc_node+0xb07/0x1060 mm/slub.c:3973 kmalloc_node include/linux/slab.h:648 [inline] kvmalloc_node+0xc0/0x2d0 mm/util.c:634 kvmalloc include/linux/slab.h:766 [inline] init_data_container+0x49/0x1e0 fs/btrfs/backref.c:2779 btrfs_ioctl_logical_to_ino+0x17c/0x750 fs/btrfs/ioctl.c:3480 btrfs_ioctl+0x714/0x1260 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:904 [inline] __se_sys_ioctl+0x261/0x450 fs/ioctl.c:890 __x64_sys_ioctl+0x96/0xe0 fs/ioctl.c:890 x64_sys_call+0x1883/0x3b50 arch/x86/include/generated/asm/syscalls_64.h:17 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Bytes 40-65535 of 65536 are uninitialized Memory access of size 65536 starts at ffff888045a40000 This happens, because we're copying a 'struct btrfs_data_container' back to user-space. This btrfs_data_container is allocated in 'init_data_container()' via kvmalloc(), which does not zero-fill the memory. Fix this by using kvzalloc() which zeroes out the memory on allocation. | ||||
| CVE-2024-27431 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpumap: Zero-initialise xdp_rxq_info struct before running XDP program When running an XDP program that is attached to a cpumap entry, we don't initialise the xdp_rxq_info data structure being used in the xdp_buff that backs the XDP program invocation. Tobias noticed that this leads to random values being returned as the xdp_md->rx_queue_index value for XDP programs running in a cpumap. This means we're basically returning the contents of the uninitialised memory, which is bad. Fix this by zero-initialising the rxq data structure before running the XDP program. | ||||
| CVE-2024-27022 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fork: defer linking file vma until vma is fully initialized Thorvald reported a WARNING [1]. And the root cause is below race: CPU 1 CPU 2 fork hugetlbfs_fallocate dup_mmap hugetlbfs_punch_hole i_mmap_lock_write(mapping); vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree. i_mmap_unlock_write(mapping); hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem! i_mmap_lock_write(mapping); hugetlb_vmdelete_list vma_interval_tree_foreach hugetlb_vma_trylock_write -- Vma_lock is cleared. tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem! hugetlb_vma_unlock_write -- Vma_lock is assigned!!! i_mmap_unlock_write(mapping); hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside i_mmap_rwsem lock while vma lock can be used in the same time. Fix this by deferring linking file vma until vma is fully initialized. Those vmas should be initialized first before they can be used. | ||||
| CVE-2024-26901 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: do_sys_name_to_handle(): use kzalloc() to fix kernel-infoleak syzbot identified a kernel information leak vulnerability in do_sys_name_to_handle() and issued the following report [1]. [1] "BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:114 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0xbc/0x100 lib/usercopy.c:40 instrument_copy_to_user include/linux/instrumented.h:114 [inline] _copy_to_user+0xbc/0x100 lib/usercopy.c:40 copy_to_user include/linux/uaccess.h:191 [inline] do_sys_name_to_handle fs/fhandle.c:73 [inline] __do_sys_name_to_handle_at fs/fhandle.c:112 [inline] __se_sys_name_to_handle_at+0x949/0xb10 fs/fhandle.c:94 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94 ... Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] __kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517 __do_kmalloc_node mm/slab_common.c:1006 [inline] __kmalloc+0x121/0x3c0 mm/slab_common.c:1020 kmalloc include/linux/slab.h:604 [inline] do_sys_name_to_handle fs/fhandle.c:39 [inline] __do_sys_name_to_handle_at fs/fhandle.c:112 [inline] __se_sys_name_to_handle_at+0x441/0xb10 fs/fhandle.c:94 __x64_sys_name_to_handle_at+0xe4/0x140 fs/fhandle.c:94 ... Bytes 18-19 of 20 are uninitialized Memory access of size 20 starts at ffff888128a46380 Data copied to user address 0000000020000240" Per Chuck Lever's suggestion, use kzalloc() instead of kmalloc() to solve the problem. | ||||
| CVE-2024-26863 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hsr: Fix uninit-value access in hsr_get_node() KMSAN reported the following uninit-value access issue [1]: ===================================================== BUG: KMSAN: uninit-value in hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246 hsr_get_node+0xa2e/0xa40 net/hsr/hsr_framereg.c:246 fill_frame_info net/hsr/hsr_forward.c:577 [inline] hsr_forward_skb+0xe12/0x30e0 net/hsr/hsr_forward.c:615 hsr_dev_xmit+0x1a1/0x270 net/hsr/hsr_device.c:223 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3087 [inline] packet_sendmsg+0x8b1d/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787 packet_alloc_skb net/packet/af_packet.c:2936 [inline] packet_snd net/packet/af_packet.c:3030 [inline] packet_sendmsg+0x70e8/0x9f30 net/packet/af_packet.c:3119 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 1 PID: 5033 Comm: syz-executor334 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 ===================================================== If the packet type ID field in the Ethernet header is either ETH_P_PRP or ETH_P_HSR, but it is not followed by an HSR tag, hsr_get_skb_sequence_nr() reads an invalid value as a sequence number. This causes the above issue. This patch fixes the issue by returning NULL if the Ethernet header is not followed by an HSR tag. | ||||
| CVE-2024-26857 | 3 Debian, Linux, Redhat | 3 Debian Linux, Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: geneve: make sure to pull inner header in geneve_rx() syzbot triggered a bug in geneve_rx() [1] Issue is similar to the one I fixed in commit 8d975c15c0cd ("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()") We have to save skb->network_header in a temporary variable in order to be able to recompute the network_header pointer after a pskb_inet_may_pull() call. pskb_inet_may_pull() makes sure the needed headers are in skb->head. [1] BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline] BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline] geneve_rx drivers/net/geneve.c:279 [inline] geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391 udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108 udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186 udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346 __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422 udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604 ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233 NF_HOOK include/linux/netfilter.h:314 [inline] ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254 dst_input include/net/dst.h:461 [inline] ip_rcv_finish net/ipv4/ip_input.c:449 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569 __netif_receive_skb_one_core net/core/dev.c:5534 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648 process_backlog+0x480/0x8b0 net/core/dev.c:5976 __napi_poll+0xe3/0x980 net/core/dev.c:6576 napi_poll net/core/dev.c:6645 [inline] net_rx_action+0x8b8/0x1870 net/core/dev.c:6778 __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553 do_softirq+0x9a/0xf0 kernel/softirq.c:454 __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline] __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378 dev_queue_xmit include/linux/netdevice.h:3171 [inline] packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276 packet_snd net/packet/af_packet.c:3081 [inline] packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook mm/slub.c:3819 [inline] slab_alloc_node mm/slub.c:3860 [inline] kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x352/0x790 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1296 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783 packet_alloc_skb net/packet/af_packet.c:2930 [inline] packet_snd net/packet/af_packet.c:3024 [inline] packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] __sys_sendto+0x735/0xa10 net/socket.c:2191 __do_sys_sendto net/socket.c:2203 [inline] __se_sys_sendto net/socket.c:2199 [inline] __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b | ||||
| CVE-2024-26849 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netlink: add nla be16/32 types to minlen array BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline] BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline] BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline] BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631 nla_validate_range_unsigned lib/nlattr.c:222 [inline] nla_validate_int_range lib/nlattr.c:336 [inline] validate_nla lib/nlattr.c:575 [inline] ... The message in question matches this policy: [NFTA_TARGET_REV] = NLA_POLICY_MAX(NLA_BE32, 255), but because NLA_BE32 size in minlen array is 0, the validation code will read past the malformed (too small) attribute. Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing: those likely should be added too. | ||||
| CVE-2024-26788 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: fsl-qdma: init irq after reg initialization Initialize the qDMA irqs after the registers are configured so that interrupts that may have been pending from a primary kernel don't get processed by the irq handler before it is ready to and cause panic with the following trace: Call trace: fsl_qdma_queue_handler+0xf8/0x3e8 __handle_irq_event_percpu+0x78/0x2b0 handle_irq_event_percpu+0x1c/0x68 handle_irq_event+0x44/0x78 handle_fasteoi_irq+0xc8/0x178 generic_handle_irq+0x24/0x38 __handle_domain_irq+0x90/0x100 gic_handle_irq+0x5c/0xb8 el1_irq+0xb8/0x180 _raw_spin_unlock_irqrestore+0x14/0x40 __setup_irq+0x4bc/0x798 request_threaded_irq+0xd8/0x190 devm_request_threaded_irq+0x74/0xe8 fsl_qdma_probe+0x4d4/0xca8 platform_drv_probe+0x50/0xa0 really_probe+0xe0/0x3f8 driver_probe_device+0x64/0x130 device_driver_attach+0x6c/0x78 __driver_attach+0xbc/0x158 bus_for_each_dev+0x5c/0x98 driver_attach+0x20/0x28 bus_add_driver+0x158/0x220 driver_register+0x60/0x110 __platform_driver_register+0x44/0x50 fsl_qdma_driver_init+0x18/0x20 do_one_initcall+0x48/0x258 kernel_init_freeable+0x1a4/0x23c kernel_init+0x10/0xf8 ret_from_fork+0x10/0x18 | ||||
| CVE-2024-26711 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: adc: ad4130: zero-initialize clock init data The clk_init_data struct does not have all its members initialized, causing issues when trying to expose the internal clock on the CLK pin. Fix this by zero-initializing the clk_init_data struct. | ||||
| CVE-2024-26644 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: don't abort filesystem when attempting to snapshot deleted subvolume If the source file descriptor to the snapshot ioctl refers to a deleted subvolume, we get the following abort: BTRFS: Transaction aborted (error -2) WARNING: CPU: 0 PID: 833 at fs/btrfs/transaction.c:1875 create_pending_snapshot+0x1040/0x1190 [btrfs] Modules linked in: pata_acpi btrfs ata_piix libata scsi_mod virtio_net blake2b_generic xor net_failover virtio_rng failover scsi_common rng_core raid6_pq libcrc32c CPU: 0 PID: 833 Comm: t_snapshot_dele Not tainted 6.7.0-rc6 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014 RIP: 0010:create_pending_snapshot+0x1040/0x1190 [btrfs] RSP: 0018:ffffa09c01337af8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9982053e7c78 RCX: 0000000000000027 RDX: ffff99827dc20848 RSI: 0000000000000001 RDI: ffff99827dc20840 RBP: ffffa09c01337c00 R08: 0000000000000000 R09: ffffa09c01337998 R10: 0000000000000003 R11: ffffffffb96da248 R12: fffffffffffffffe R13: ffff99820535bb28 R14: ffff99820b7bd000 R15: ffff99820381ea80 FS: 00007fe20aadabc0(0000) GS:ffff99827dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000559a120b502f CR3: 00000000055b6000 CR4: 00000000000006f0 Call Trace: <TASK> ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? __warn+0x81/0x130 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? report_bug+0x171/0x1a0 ? handle_bug+0x3a/0x70 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? create_pending_snapshot+0x1040/0x1190 [btrfs] ? create_pending_snapshot+0x1040/0x1190 [btrfs] create_pending_snapshots+0x92/0xc0 [btrfs] btrfs_commit_transaction+0x66b/0xf40 [btrfs] btrfs_mksubvol+0x301/0x4d0 [btrfs] btrfs_mksnapshot+0x80/0xb0 [btrfs] __btrfs_ioctl_snap_create+0x1c2/0x1d0 [btrfs] btrfs_ioctl_snap_create_v2+0xc4/0x150 [btrfs] btrfs_ioctl+0x8a6/0x2650 [btrfs] ? kmem_cache_free+0x22/0x340 ? do_sys_openat2+0x97/0xe0 __x64_sys_ioctl+0x97/0xd0 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7fe20abe83af RSP: 002b:00007ffe6eff1360 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007fe20abe83af RDX: 00007ffe6eff23c0 RSI: 0000000050009417 RDI: 0000000000000003 RBP: 0000000000000003 R08: 0000000000000000 R09: 00007fe20ad16cd0 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffe6eff13c0 R14: 00007fe20ad45000 R15: 0000559a120b6d58 </TASK> ---[ end trace 0000000000000000 ]--- BTRFS: error (device vdc: state A) in create_pending_snapshot:1875: errno=-2 No such entry BTRFS info (device vdc: state EA): forced readonly BTRFS warning (device vdc: state EA): Skipping commit of aborted transaction. BTRFS: error (device vdc: state EA) in cleanup_transaction:2055: errno=-2 No such entry This happens because create_pending_snapshot() initializes the new root item as a copy of the source root item. This includes the refs field, which is 0 for a deleted subvolume. The call to btrfs_insert_root() therefore inserts a root with refs == 0. btrfs_get_new_fs_root() then finds the root and returns -ENOENT if refs == 0, which causes create_pending_snapshot() to abort. Fix it by checking the source root's refs before attempting the snapshot, but after locking subvol_sem to avoid racing with deletion. | ||||
| CVE-2024-26641 | 4 Debian, Linux, Netapp and 1 more | 25 Debian Linux, Linux Kernel, A150 and 22 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv() syzbot found __ip6_tnl_rcv() could access unitiliazed data [1]. Call pskb_inet_may_pull() to fix this, and initialize ipv6h variable after this call as it can change skb->head. [1] BUG: KMSAN: uninit-value in __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] BUG: KMSAN: uninit-value in INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] BUG: KMSAN: uninit-value in IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 __INET_ECN_decapsulate include/net/inet_ecn.h:253 [inline] INET_ECN_decapsulate include/net/inet_ecn.h:275 [inline] IP6_ECN_decapsulate+0x7df/0x1e50 include/net/inet_ecn.h:321 ip6ip6_dscp_ecn_decapsulate+0x178/0x1b0 net/ipv6/ip6_tunnel.c:727 __ip6_tnl_rcv+0xd4e/0x1590 net/ipv6/ip6_tunnel.c:845 ip6_tnl_rcv+0xce/0x100 net/ipv6/ip6_tunnel.c:888 gre_rcv+0x143f/0x1870 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5532 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646 netif_receive_skb_internal net/core/dev.c:5732 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5791 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] kmem_cache_alloc_node+0x5e9/0xb10 mm/slub.c:3523 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560 __alloc_skb+0x318/0x740 net/core/skbuff.c:651 alloc_skb include/linux/skbuff.h:1286 [inline] alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6334 sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2787 tun_alloc_skb drivers/net/tun.c:1531 [inline] tun_get_user+0x1e8a/0x66d0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2084 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0x786/0x1200 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x6d/0x140 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 5034 Comm: syz-executor331 Not tainted 6.7.0-syzkaller-00562-g9f8413c4a66f #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 | ||||
| CVE-2024-26638 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nbd: always initialize struct msghdr completely syzbot complains that msg->msg_get_inq value can be uninitialized [1] struct msghdr got many new fields recently, we should always make sure their values is zero by default. [1] BUG: KMSAN: uninit-value in tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571 tcp_recvmsg+0x686/0xac0 net/ipv4/tcp.c:2571 inet_recvmsg+0x131/0x580 net/ipv4/af_inet.c:879 sock_recvmsg_nosec net/socket.c:1044 [inline] sock_recvmsg+0x12b/0x1e0 net/socket.c:1066 __sock_xmit+0x236/0x5c0 drivers/block/nbd.c:538 nbd_read_reply drivers/block/nbd.c:732 [inline] recv_work+0x262/0x3100 drivers/block/nbd.c:863 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x104e/0x1e70 kernel/workqueue.c:2700 worker_thread+0xf45/0x1490 kernel/workqueue.c:2781 kthread+0x3ed/0x540 kernel/kthread.c:388 ret_from_fork+0x66/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:242 Local variable msg created at: __sock_xmit+0x4c/0x5c0 drivers/block/nbd.c:513 nbd_read_reply drivers/block/nbd.c:732 [inline] recv_work+0x262/0x3100 drivers/block/nbd.c:863 CPU: 1 PID: 7465 Comm: kworker/u5:1 Not tainted 6.7.0-rc7-syzkaller-00041-gf016f7547aee #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Workqueue: nbd5-recv recv_work | ||||
| CVE-2022-49567 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/mempolicy: fix uninit-value in mpol_rebind_policy() mpol_set_nodemask()(mm/mempolicy.c) does not set up nodemask when pol->mode is MPOL_LOCAL. Check pol->mode before access pol->w.cpuset_mems_allowed in mpol_rebind_policy()(mm/mempolicy.c). BUG: KMSAN: uninit-value in mpol_rebind_policy mm/mempolicy.c:352 [inline] BUG: KMSAN: uninit-value in mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 mpol_rebind_policy mm/mempolicy.c:352 [inline] mpol_rebind_task+0x2ac/0x2c0 mm/mempolicy.c:368 cpuset_change_task_nodemask kernel/cgroup/cpuset.c:1711 [inline] cpuset_attach+0x787/0x15e0 kernel/cgroup/cpuset.c:2278 cgroup_migrate_execute+0x1023/0x1d20 kernel/cgroup/cgroup.c:2515 cgroup_migrate kernel/cgroup/cgroup.c:2771 [inline] cgroup_attach_task+0x540/0x8b0 kernel/cgroup/cgroup.c:2804 __cgroup1_procs_write+0x5cc/0x7a0 kernel/cgroup/cgroup-v1.c:520 cgroup1_tasks_write+0x94/0xb0 kernel/cgroup/cgroup-v1.c:539 cgroup_file_write+0x4c2/0x9e0 kernel/cgroup/cgroup.c:3852 kernfs_fop_write_iter+0x66a/0x9f0 fs/kernfs/file.c:296 call_write_iter include/linux/fs.h:2162 [inline] new_sync_write fs/read_write.c:503 [inline] vfs_write+0x1318/0x2030 fs/read_write.c:590 ksys_write+0x28b/0x510 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae Uninit was created at: slab_post_alloc_hook mm/slab.h:524 [inline] slab_alloc_node mm/slub.c:3251 [inline] slab_alloc mm/slub.c:3259 [inline] kmem_cache_alloc+0x902/0x11c0 mm/slub.c:3264 mpol_new mm/mempolicy.c:293 [inline] do_set_mempolicy+0x421/0xb70 mm/mempolicy.c:853 kernel_set_mempolicy mm/mempolicy.c:1504 [inline] __do_sys_set_mempolicy mm/mempolicy.c:1510 [inline] __se_sys_set_mempolicy+0x44c/0xb60 mm/mempolicy.c:1507 __x64_sys_set_mempolicy+0xd8/0x110 mm/mempolicy.c:1507 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x54/0xd0 arch/x86/entry/common.c:82 entry_SYSCALL_64_after_hwframe+0x44/0xae KMSAN: uninit-value in mpol_rebind_task (2) https://syzkaller.appspot.com/bug?id=d6eb90f952c2a5de9ea718a1b873c55cb13b59dc This patch seems to fix below bug too. KMSAN: uninit-value in mpol_rebind_mm (2) https://syzkaller.appspot.com/bug?id=f2fecd0d7013f54ec4162f60743a2b28df40926b The uninit-value is pol->w.cpuset_mems_allowed in mpol_rebind_policy(). When syzkaller reproducer runs to the beginning of mpol_new(), mpol_new() mm/mempolicy.c do_mbind() mm/mempolicy.c kernel_mbind() mm/mempolicy.c `mode` is 1(MPOL_PREFERRED), nodes_empty(*nodes) is `true` and `flags` is 0. Then mode = MPOL_LOCAL; ... policy->mode = mode; policy->flags = flags; will be executed. So in mpol_set_nodemask(), mpol_set_nodemask() mm/mempolicy.c do_mbind() kernel_mbind() pol->mode is 4 (MPOL_LOCAL), that `nodemask` in `pol` is not initialized, which will be accessed in mpol_rebind_policy(). | ||||
| CVE-2022-49507 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: da9121: Fix uninit-value in da9121_assign_chip_model() KASAN report slab-out-of-bounds in __regmap_init as follows: BUG: KASAN: slab-out-of-bounds in __regmap_init drivers/base/regmap/regmap.c:841 Read of size 1 at addr ffff88803678cdf1 by task xrun/9137 CPU: 0 PID: 9137 Comm: xrun Tainted: G W 5.18.0-rc2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xe8/0x15a lib/dump_stack.c:88 print_report.cold+0xcd/0x69b mm/kasan/report.c:313 kasan_report+0x8e/0xc0 mm/kasan/report.c:491 __regmap_init+0x4540/0x4ba0 drivers/base/regmap/regmap.c:841 __devm_regmap_init+0x7a/0x100 drivers/base/regmap/regmap.c:1266 __devm_regmap_init_i2c+0x65/0x80 drivers/base/regmap/regmap-i2c.c:394 da9121_i2c_probe+0x386/0x6d1 drivers/regulator/da9121-regulator.c:1039 i2c_device_probe+0x959/0xac0 drivers/i2c/i2c-core-base.c:563 This happend when da9121 device is probe by da9121_i2c_id, but with invalid dts. Thus, chip->subvariant_id is set to -EINVAL, and later da9121_assign_chip_model() will access 'regmap' without init it. Fix it by return -EINVAL from da9121_assign_chip_model() if 'chip->subvariant_id' is invalid. | ||||