Filtered by vendor Linux
Subscriptions
Total
13302 CVE
CVE | Vendors | Products | Updated | CVSS v3.1 |
---|---|---|---|---|
CVE-2022-50344 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
In the Linux kernel, the following vulnerability has been resolved: ext4: fix null-ptr-deref in ext4_write_info I caught a null-ptr-deref bug as follows: ================================================================== KASAN: null-ptr-deref in range [0x0000000000000068-0x000000000000006f] CPU: 1 PID: 1589 Comm: umount Not tainted 5.10.0-02219-dirty #339 RIP: 0010:ext4_write_info+0x53/0x1b0 [...] Call Trace: dquot_writeback_dquots+0x341/0x9a0 ext4_sync_fs+0x19e/0x800 __sync_filesystem+0x83/0x100 sync_filesystem+0x89/0xf0 generic_shutdown_super+0x79/0x3e0 kill_block_super+0xa1/0x110 deactivate_locked_super+0xac/0x130 deactivate_super+0xb6/0xd0 cleanup_mnt+0x289/0x400 __cleanup_mnt+0x16/0x20 task_work_run+0x11c/0x1c0 exit_to_user_mode_prepare+0x203/0x210 syscall_exit_to_user_mode+0x5b/0x3a0 do_syscall_64+0x59/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ================================================================== Above issue may happen as follows: ------------------------------------- exit_to_user_mode_prepare task_work_run __cleanup_mnt cleanup_mnt deactivate_super deactivate_locked_super kill_block_super generic_shutdown_super shrink_dcache_for_umount dentry = sb->s_root sb->s_root = NULL <--- Here set NULL sync_filesystem __sync_filesystem sb->s_op->sync_fs > ext4_sync_fs dquot_writeback_dquots sb->dq_op->write_info > ext4_write_info ext4_journal_start(d_inode(sb->s_root), EXT4_HT_QUOTA, 2) d_inode(sb->s_root) s_root->d_inode <--- Null pointer dereference To solve this problem, we use ext4_journal_start_sb directly to avoid s_root being used. | ||||
CVE-2022-50345 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
In the Linux kernel, the following vulnerability has been resolved: NFSD: Protect against send buffer overflow in NFSv3 READ Since before the git era, NFSD has conserved the number of pages held by each nfsd thread by combining the RPC receive and send buffers into a single array of pages. This works because there are no cases where an operation needs a large RPC Call message and a large RPC Reply at the same time. Once an RPC Call has been received, svc_process() updates svc_rqst::rq_res to describe the part of rq_pages that can be used for constructing the Reply. This means that the send buffer (rq_res) shrinks when the received RPC record containing the RPC Call is large. A client can force this shrinkage on TCP by sending a correctly- formed RPC Call header contained in an RPC record that is excessively large. The full maximum payload size cannot be constructed in that case. | ||||
CVE-2022-50347 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: mmc: rtsx_usb_sdmmc: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and calling mmc_free_host() in the error path, besides, led_classdev_unregister() and pm_runtime_disable() also need be called. | ||||
CVE-2022-50348 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: nfsd: Fix a memory leak in an error handling path If this memdup_user() call fails, the memory allocated in a previous call a few lines above should be freed. Otherwise it leaks. | ||||
CVE-2022-50351 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: cifs: Fix xid leak in cifs_create() If the cifs already shutdown, we should free the xid before return, otherwise, the xid will be leaked. | ||||
CVE-2023-53304 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_rbtree: fix overlap expiration walk The lazy gc on insert that should remove timed-out entries fails to release the other half of the interval, if any. Can be reproduced with tests/shell/testcases/sets/0044interval_overlap_0 in nftables.git and kmemleak enabled kernel. Second bug is the use of rbe_prev vs. prev pointer. If rbe_prev() returns NULL after at least one iteration, rbe_prev points to element that is not an end interval, hence it should not be removed. Lastly, check the genmask of the end interval if this is active in the current generation. | ||||
CVE-2023-53307 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
In the Linux kernel, the following vulnerability has been resolved: rbd: avoid use-after-free in do_rbd_add() when rbd_dev_create() fails If getting an ID or setting up a work queue in rbd_dev_create() fails, use-after-free on rbd_dev->rbd_client, rbd_dev->spec and rbd_dev->opts is triggered in do_rbd_add(). The root cause is that the ownership of these structures is transfered to rbd_dev prematurely and they all end up getting freed when rbd_dev_create() calls rbd_dev_free() prior to returning to do_rbd_add(). Found by Linux Verification Center (linuxtesting.org) with SVACE, an incomplete patch submitted by Natalia Petrova <n.petrova@fintech.ru>. | ||||
CVE-2023-53308 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: net: fec: Better handle pm_runtime_get() failing in .remove() In the (unlikely) event that pm_runtime_get() (disguised as pm_runtime_resume_and_get()) fails, the remove callback returned an error early. The problem with this is that the driver core ignores the error value and continues removing the device. This results in a resource leak. Worse the devm allocated resources are freed and so if a callback of the driver is called later the register mapping is already gone which probably results in a crash. | ||||
CVE-2023-53310 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: power: supply: axp288_fuel_gauge: Fix external_power_changed race fuel_gauge_external_power_changed() dereferences info->bat, which gets sets in axp288_fuel_gauge_probe() like this: info->bat = devm_power_supply_register(dev, &fuel_gauge_desc, &psy_cfg); As soon as devm_power_supply_register() has called device_add() the external_power_changed callback can get called. So there is a window where fuel_gauge_external_power_changed() may get called while info->bat has not been set yet leading to a NULL pointer dereference. Fixing this is easy. The external_power_changed callback gets passed the power_supply which will eventually get stored in info->bat, so fuel_gauge_external_power_changed() can simply directly use the passed in psy argument which is always valid. | ||||
CVE-2023-53314 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: fbdev/ep93xx-fb: Do not assign to struct fb_info.dev Do not assing the Linux device to struct fb_info.dev. The call to register_framebuffer() initializes the field to the fbdev device. Drivers should not override its value. Fixes a bug where the driver incorrectly decreases the hardware device's reference counter and leaks the fbdev device. v2: * add Fixes tag (Dan) | ||||
CVE-2023-53316 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: drm/msm/dp: Free resources after unregistering them The DP component's unbind operation walks through the submodules to unregister and clean things up. But if the unbind happens because the DP controller itself is being removed, all the memory for those submodules has just been freed. Change the order of these operations to avoid the many use-after-free that otherwise happens in this code path. Patchwork: https://patchwork.freedesktop.org/patch/542166/ | ||||
CVE-2023-53317 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
In the Linux kernel, the following vulnerability has been resolved: ext4: fix WARNING in mb_find_extent Syzbot found the following issue: EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, O_DIRECT and fast_commit support! EXT4-fs (loop0): orphan cleanup on readonly fs ------------[ cut here ]------------ WARNING: CPU: 1 PID: 5067 at fs/ext4/mballoc.c:1869 mb_find_extent+0x8a1/0xe30 Modules linked in: CPU: 1 PID: 5067 Comm: syz-executor307 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 RIP: 0010:mb_find_extent+0x8a1/0xe30 fs/ext4/mballoc.c:1869 RSP: 0018:ffffc90003c9e098 EFLAGS: 00010293 RAX: ffffffff82405731 RBX: 0000000000000041 RCX: ffff8880783457c0 RDX: 0000000000000000 RSI: 0000000000000041 RDI: 0000000000000040 RBP: 0000000000000040 R08: ffffffff82405723 R09: ffffed10053c9402 R10: ffffed10053c9402 R11: 1ffff110053c9401 R12: 0000000000000000 R13: ffffc90003c9e538 R14: dffffc0000000000 R15: ffffc90003c9e2cc FS: 0000555556665300(0000) GS:ffff8880b9900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056312f6796f8 CR3: 0000000022437000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> ext4_mb_complex_scan_group+0x353/0x1100 fs/ext4/mballoc.c:2307 ext4_mb_regular_allocator+0x1533/0x3860 fs/ext4/mballoc.c:2735 ext4_mb_new_blocks+0xddf/0x3db0 fs/ext4/mballoc.c:5605 ext4_ext_map_blocks+0x1868/0x6880 fs/ext4/extents.c:4286 ext4_map_blocks+0xa49/0x1cc0 fs/ext4/inode.c:651 ext4_getblk+0x1b9/0x770 fs/ext4/inode.c:864 ext4_bread+0x2a/0x170 fs/ext4/inode.c:920 ext4_quota_write+0x225/0x570 fs/ext4/super.c:7105 write_blk fs/quota/quota_tree.c:64 [inline] get_free_dqblk+0x34a/0x6d0 fs/quota/quota_tree.c:130 do_insert_tree+0x26b/0x1aa0 fs/quota/quota_tree.c:340 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 do_insert_tree+0x722/0x1aa0 fs/quota/quota_tree.c:375 dq_insert_tree fs/quota/quota_tree.c:401 [inline] qtree_write_dquot+0x3b6/0x530 fs/quota/quota_tree.c:420 v2_write_dquot+0x11b/0x190 fs/quota/quota_v2.c:358 dquot_acquire+0x348/0x670 fs/quota/dquot.c:444 ext4_acquire_dquot+0x2dc/0x400 fs/ext4/super.c:6740 dqget+0x999/0xdc0 fs/quota/dquot.c:914 __dquot_initialize+0x3d0/0xcf0 fs/quota/dquot.c:1492 ext4_process_orphan+0x57/0x2d0 fs/ext4/orphan.c:329 ext4_orphan_cleanup+0xb60/0x1340 fs/ext4/orphan.c:474 __ext4_fill_super fs/ext4/super.c:5516 [inline] ext4_fill_super+0x81cd/0x8700 fs/ext4/super.c:5644 get_tree_bdev+0x400/0x620 fs/super.c:1282 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd Add some debug information: mb_find_extent: mb_find_extent block=41, order=0 needed=64 next=0 ex=0/41/1@3735929054 64 64 7 block_bitmap: ff 3f 0c 00 fc 01 00 00 d2 3d 00 00 00 00 00 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff Acctually, blocks per group is 64, but block bitmap indicate at least has 128 blocks. Now, ext4_validate_block_bitmap() didn't check invalid block's bitmap if set. To resolve above issue, add check like fsck "Padding at end of block bitmap is not set". | ||||
CVE-2023-53322 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
In the Linux kernel, the following vulnerability has been resolved: scsi: qla2xxx: Wait for io return on terminate rport System crash due to use after free. Current code allows terminate_rport_io to exit before making sure all IOs has returned. For FCP-2 device, IO's can hang on in HW because driver has not tear down the session in FW at first sign of cable pull. When dev_loss_tmo timer pops, terminate_rport_io is called and upper layer is about to free various resources. Terminate_rport_io trigger qla to do the final cleanup, but the cleanup might not be fast enough where it leave qla still holding on to the same resource. Wait for IO's to return to upper layer before resources are freed. | ||||
CVE-2023-53325 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: dp: Change logging to dev for mtk_dp_aux_transfer() Change logging from drm_{err,info}() to dev_{err,info}() in functions mtk_dp_aux_transfer() and mtk_dp_aux_do_transfer(): this will be essential to avoid getting NULL pointer kernel panics if any kind of error happens during AUX transfers happening before the bridge is attached. This may potentially start happening in a later commit implementing aux-bus support, as AUX transfers will be triggered from the panel driver (for EDID) before the mtk-dp bridge gets attached, and it's done in preparation for the same. | ||||
CVE-2023-53327 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
In the Linux kernel, the following vulnerability has been resolved: iommufd/selftest: Catch overflow of uptr and length syzkaller hits a WARN_ON when trying to have a uptr close to UINTPTR_MAX: WARNING: CPU: 1 PID: 393 at drivers/iommu/iommufd/selftest.c:403 iommufd_test+0xb19/0x16f0 Modules linked in: CPU: 1 PID: 393 Comm: repro Not tainted 6.2.0-c9c3395d5e3d #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:iommufd_test+0xb19/0x16f0 Code: 94 c4 31 ff 44 89 e6 e8 a5 54 17 ff 45 84 e4 0f 85 bb 0b 00 00 41 be fb ff ff ff e8 31 53 17 ff e9 a0 f7 ff ff e8 27 53 17 ff <0f> 0b 41 be 8 RSP: 0018:ffffc90000eabdc0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff8214c487 RDX: 0000000000000000 RSI: ffff88800f5c8000 RDI: 0000000000000002 RBP: ffffc90000eabe48 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: 00000000cd2b0000 R13: 00000000cd2af000 R14: 0000000000000000 R15: ffffc90000eabe68 FS: 00007f94d76d5740(0000) GS:ffff88807dd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000043 CR3: 0000000006880006 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> ? write_comp_data+0x2f/0x90 iommufd_fops_ioctl+0x1ef/0x310 __x64_sys_ioctl+0x10e/0x160 ? __pfx_iommufd_fops_ioctl+0x10/0x10 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Check that the user memory range doesn't overflow. | ||||
CVE-2025-39820 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: drm/msm/dpu: Add a null ptr check for dpu_encoder_needs_modeset The drm_atomic_get_new_connector_state() can return NULL if the connector is not part of the atomic state. Add a check to prevent a NULL pointer dereference. This follows the same pattern used in dpu_encoder_update_topology() within the same file, which checks for NULL before using conn_state. Patchwork: https://patchwork.freedesktop.org/patch/665188/ | ||||
CVE-2025-39822 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 5.5 Medium |
In the Linux kernel, the following vulnerability has been resolved: io_uring/kbuf: fix signedness in this_len calculation When importing and using buffers, buf->len is considered unsigned. However, buf->len is converted to signed int when committing. This can lead to unexpected behavior if the buffer is large enough to be interpreted as a negative value. Make min_t calculation unsigned. | ||||
CVE-2025-39823 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
In the Linux kernel, the following vulnerability has been resolved: KVM: x86: use array_index_nospec with indices that come from guest min and dest_id are guest-controlled indices. Using array_index_nospec() after the bounds checks clamps these values to mitigate speculative execution side-channels. | ||||
CVE-2025-39824 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
In the Linux kernel, the following vulnerability has been resolved: HID: asus: fix UAF via HID_CLAIMED_INPUT validation After hid_hw_start() is called hidinput_connect() will eventually be called to set up the device with the input layer since the HID_CONNECT_DEFAULT connect mask is used. During hidinput_connect() all input and output reports are processed and corresponding hid_inputs are allocated and configured via hidinput_configure_usages(). This process involves slot tagging report fields and configuring usages by setting relevant bits in the capability bitmaps. However it is possible that the capability bitmaps are not set at all leading to the subsequent hidinput_has_been_populated() check to fail leading to the freeing of the hid_input and the underlying input device. This becomes problematic because a malicious HID device like a ASUS ROG N-Key keyboard can trigger the above scenario via a specially crafted descriptor which then leads to a user-after-free when the name of the freed input device is written to later on after hid_hw_start(). Below, report 93 intentionally utilises the HID_UP_UNDEFINED Usage Page which is skipped during usage configuration, leading to the frees. 0x05, 0x0D, // Usage Page (Digitizer) 0x09, 0x05, // Usage (Touch Pad) 0xA1, 0x01, // Collection (Application) 0x85, 0x0D, // Report ID (13) 0x06, 0x00, 0xFF, // Usage Page (Vendor Defined 0xFF00) 0x09, 0xC5, // Usage (0xC5) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x04, // Report Count (4) 0xB1, 0x02, // Feature (Data,Var,Abs) 0x85, 0x5D, // Report ID (93) 0x06, 0x00, 0x00, // Usage Page (Undefined) 0x09, 0x01, // Usage (0x01) 0x15, 0x00, // Logical Minimum (0) 0x26, 0xFF, 0x00, // Logical Maximum (255) 0x75, 0x08, // Report Size (8) 0x95, 0x1B, // Report Count (27) 0x81, 0x02, // Input (Data,Var,Abs) 0xC0, // End Collection Below is the KASAN splat after triggering the UAF: [ 21.672709] ================================================================== [ 21.673700] BUG: KASAN: slab-use-after-free in asus_probe+0xeeb/0xf80 [ 21.673700] Write of size 8 at addr ffff88810a0ac000 by task kworker/1:2/54 [ 21.673700] [ 21.673700] CPU: 1 UID: 0 PID: 54 Comm: kworker/1:2 Not tainted 6.16.0-rc4-g9773391cf4dd-dirty #36 PREEMPT(voluntary) [ 21.673700] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 [ 21.673700] Call Trace: [ 21.673700] <TASK> [ 21.673700] dump_stack_lvl+0x5f/0x80 [ 21.673700] print_report+0xd1/0x660 [ 21.673700] kasan_report+0xe5/0x120 [ 21.673700] __asan_report_store8_noabort+0x1b/0x30 [ 21.673700] asus_probe+0xeeb/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Allocated by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_alloc_info+0x3b/0x50 [ 21.673700] __kasan_kmalloc+0x9c/0xa0 [ 21.673700] __kmalloc_cache_noprof+0x139/0x340 [ 21.673700] input_allocate_device+0x44/0x370 [ 21.673700] hidinput_connect+0xcb6/0x2630 [ 21.673700] hid_connect+0xf74/0x1d60 [ 21.673700] hid_hw_start+0x8c/0x110 [ 21.673700] asus_probe+0x5a3/0xf80 [ 21.673700] hid_device_probe+0x2ee/0x700 [ 21.673700] really_probe+0x1c6/0x6b0 [ 21.673700] __driver_probe_device+0x24f/0x310 [ 21.673700] driver_probe_device+0x4e/0x220 [...] [ 21.673700] [ 21.673700] Freed by task 54: [ 21.673700] kasan_save_stack+0x3d/0x60 [ 21.673700] kasan_save_track+0x18/0x40 [ 21.673700] kasan_save_free_info+0x3f/0x60 [ 21.673700] __kasan_slab_free+0x3c/0x50 [ 21.673700] kfre ---truncated--- | ||||
CVE-2025-39825 | 1 Linux | 1 Linux Kernel | 2025-09-17 | 7.0 High |
In the Linux kernel, the following vulnerability has been resolved: smb: client: fix race with concurrent opens in rename(2) Besides sending the rename request to the server, the rename process also involves closing any deferred close, waiting for outstanding I/O to complete as well as marking all existing open handles as deleted to prevent them from deferring closes, which increases the race window for potential concurrent opens on the target file. Fix this by unhashing the dentry in advance to prevent any concurrent opens on the target. |