Filtered by vendor Redhat
Subscriptions
Filtered by product Rhel Tus
Subscriptions
Total
1138 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-5535 | 2 Openssl, Redhat | 7 Openssl, Enterprise Linux, Jboss Core Services and 4 more | 2025-11-03 | 9.1 Critical |
| Issue summary: Calling the OpenSSL API function SSL_select_next_proto with an empty supported client protocols buffer may cause a crash or memory contents to be sent to the peer. Impact summary: A buffer overread can have a range of potential consequences such as unexpected application beahviour or a crash. In particular this issue could result in up to 255 bytes of arbitrary private data from memory being sent to the peer leading to a loss of confidentiality. However, only applications that directly call the SSL_select_next_proto function with a 0 length list of supported client protocols are affected by this issue. This would normally never be a valid scenario and is typically not under attacker control but may occur by accident in the case of a configuration or programming error in the calling application. The OpenSSL API function SSL_select_next_proto is typically used by TLS applications that support ALPN (Application Layer Protocol Negotiation) or NPN (Next Protocol Negotiation). NPN is older, was never standardised and is deprecated in favour of ALPN. We believe that ALPN is significantly more widely deployed than NPN. The SSL_select_next_proto function accepts a list of protocols from the server and a list of protocols from the client and returns the first protocol that appears in the server list that also appears in the client list. In the case of no overlap between the two lists it returns the first item in the client list. In either case it will signal whether an overlap between the two lists was found. In the case where SSL_select_next_proto is called with a zero length client list it fails to notice this condition and returns the memory immediately following the client list pointer (and reports that there was no overlap in the lists). This function is typically called from a server side application callback for ALPN or a client side application callback for NPN. In the case of ALPN the list of protocols supplied by the client is guaranteed by libssl to never be zero in length. The list of server protocols comes from the application and should never normally be expected to be of zero length. In this case if the SSL_select_next_proto function has been called as expected (with the list supplied by the client passed in the client/client_len parameters), then the application will not be vulnerable to this issue. If the application has accidentally been configured with a zero length server list, and has accidentally passed that zero length server list in the client/client_len parameters, and has additionally failed to correctly handle a "no overlap" response (which would normally result in a handshake failure in ALPN) then it will be vulnerable to this problem. In the case of NPN, the protocol permits the client to opportunistically select a protocol when there is no overlap. OpenSSL returns the first client protocol in the no overlap case in support of this. The list of client protocols comes from the application and should never normally be expected to be of zero length. However if the SSL_select_next_proto function is accidentally called with a client_len of 0 then an invalid memory pointer will be returned instead. If the application uses this output as the opportunistic protocol then the loss of confidentiality will occur. This issue has been assessed as Low severity because applications are most likely to be vulnerable if they are using NPN instead of ALPN - but NPN is not widely used. It also requires an application configuration or programming error. Finally, this issue would not typically be under attacker control making active exploitation unlikely. The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. Due to the low severity of this issue we are not issuing new releases of OpenSSL at this time. The fix will be included in the next releases when they become available. | ||||
| CVE-2024-54534 | 2 Apple, Redhat | 13 Ipados, Iphone Os, Macos and 10 more | 2025-11-03 | 8.8 High |
| The issue was addressed with improved memory handling. This issue is fixed in watchOS 11.2, visionOS 2.2, tvOS 18.2, macOS Sequoia 15.2, Safari 18.2, iOS 18.2 and iPadOS 18.2. Processing maliciously crafted web content may lead to memory corruption. | ||||
| CVE-2024-54508 | 2 Apple, Redhat | 13 Ipados, Iphone Os, Macos and 10 more | 2025-11-03 | 7.5 High |
| The issue was addressed with improved memory handling. This issue is fixed in watchOS 11.2, visionOS 2.2, tvOS 18.2, macOS Sequoia 15.2, Safari 18.2, iOS 18.2 and iPadOS 18.2. Processing maliciously crafted web content may lead to an unexpected process crash. | ||||
| CVE-2024-54505 | 2 Apple, Redhat | 13 Ipados, Iphone Os, Macos and 10 more | 2025-11-03 | 6.5 Medium |
| A type confusion issue was addressed with improved memory handling. This issue is fixed in iPadOS 17.7.3, watchOS 11.2, visionOS 2.2, tvOS 18.2, macOS Sequoia 15.2, Safari 18.2, iOS 18.2 and iPadOS 18.2. Processing maliciously crafted web content may lead to memory corruption. | ||||
| CVE-2024-54502 | 2 Apple, Redhat | 13 Ipados, Iphone Os, Macos and 10 more | 2025-11-03 | 6.5 Medium |
| The issue was addressed with improved checks. This issue is fixed in watchOS 11.2, visionOS 2.2, tvOS 18.2, macOS Sequoia 15.2, Safari 18.2, iOS 18.2 and iPadOS 18.2. Processing maliciously crafted web content may lead to an unexpected process crash. | ||||
| CVE-2024-54479 | 2 Apple, Redhat | 13 Ipados, Iphone Os, Macos and 10 more | 2025-11-03 | 7.5 High |
| The issue was addressed with improved checks. This issue is fixed in iPadOS 17.7.3, watchOS 11.2, visionOS 2.2, tvOS 18.2, macOS Sequoia 15.2, Safari 18.2, iOS 18.2 and iPadOS 18.2. Processing maliciously crafted web content may lead to an unexpected process crash. | ||||
| CVE-2024-53122 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-11-03 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: cope racing subflow creation in mptcp_rcv_space_adjust Additional active subflows - i.e. created by the in kernel path manager - are included into the subflow list before starting the 3whs. A racing recvmsg() spooling data received on an already established subflow would unconditionally call tcp_cleanup_rbuf() on all the current subflows, potentially hitting a divide by zero error on the newly created ones. Explicitly check that the subflow is in a suitable state before invoking tcp_cleanup_rbuf(). | ||||
| CVE-2024-52804 | 2 Redhat, Tornadoweb | 5 Enterprise Linux, Rhel E4s, Rhel Eus and 2 more | 2025-11-03 | 7.5 High |
| Tornado is a Python web framework and asynchronous networking library. The algorithm used for parsing HTTP cookies in Tornado versions prior to 6.4.2 sometimes has quadratic complexity, leading to excessive CPU consumption when parsing maliciously-crafted cookie headers. This parsing occurs in the event loop thread and may block the processing of other requests. Version 6.4.2 fixes the issue. | ||||
| CVE-2024-52531 | 2 Gnome, Redhat | 8 Libsoup, Camel K, Enterprise Linux and 5 more | 2025-11-03 | 6.5 Medium |
| GNOME libsoup before 3.6.1 allows a buffer overflow in applications that perform conversion to UTF-8 in soup_header_parse_param_list_strict. There is a plausible way to reach this remotely via soup_message_headers_get_content_type (e.g., an application may want to retrieve the content type of a request or response). | ||||
| CVE-2024-52530 | 2 Gnome, Redhat | 7 Libsoup, Enterprise Linux, Rhel Aus and 4 more | 2025-11-03 | 7.5 High |
| GNOME libsoup before 3.6.0 allows HTTP request smuggling in some configurations because '\0' characters at the end of header names are ignored, i.e., a "Transfer-Encoding\0: chunked" header is treated the same as a "Transfer-Encoding: chunked" header. | ||||
| CVE-2024-47615 | 2 Gstreamer Project, Redhat | 7 Gstreamer, Enterprise Linux, Rhel Aus and 4 more | 2025-11-03 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. An OOB-Write has been detected in the function gst_parse_vorbis_setup_packet within vorbis_parse.c. The integer size is read from the input file without proper validation. As a result, size can exceed the fixed size of the pad->vorbis_mode_sizes array (which size is 256). When this happens, the for loop overwrites the entire pad structure with 0s and 1s, affecting adjacent memory as well. This OOB-write can overwrite up to 380 bytes of memory beyond the boundaries of the pad->vorbis_mode_sizes array. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47607 | 2 Gstreamer Project, Redhat | 7 Gstreamer, Enterprise Linux, Rhel Aus and 4 more | 2025-11-03 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. stack-buffer overflow has been detected in the gst_opus_dec_parse_header function within `gstopusdec.c'. The pos array is a stack-allocated buffer of size 64. If n_channels exceeds 64, the for loop will write beyond the boundaries of the pos array. The value written will always be GST_AUDIO_CHANNEL_POSITION_NONE. This bug allows to overwrite the EIP address allocated in the stack. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47538 | 2 Gstreamer Project, Redhat | 7 Gstreamer, Enterprise Linux, Rhel Aus and 4 more | 2025-11-03 | 9.8 Critical |
| GStreamer is a library for constructing graphs of media-handling components. A stack-buffer overflow has been detected in the `vorbis_handle_identification_packet` function within `gstvorbisdec.c`. The position array is a stack-allocated buffer of size 64. If vd->vi.channels exceeds 64, the for loop will write beyond the boundaries of the position array. The value written will always be `GST_AUDIO_CHANNEL_POSITION_NONE`. This vulnerability allows someone to overwrite the EIP address allocated in the stack. Additionally, this bug can overwrite the `GstAudioInfo` info structure. This vulnerability is fixed in 1.24.10. | ||||
| CVE-2024-47176 | 2 Openprinting, Redhat | 8 Cups, Cups-browsed, Enterprise Linux and 5 more | 2025-11-03 | 5.3 Medium |
| CUPS is a standards-based, open-source printing system, and `cups-browsed` contains network printing functionality including, but not limited to, auto-discovering print services and shared printers. `cups-browsed` binds to `INADDR_ANY:631`, causing it to trust any packet from any source, and can cause the `Get-Printer-Attributes` IPP request to an attacker controlled URL. When combined with other vulnerabilities, such as CVE-2024-47076, CVE-2024-47175, and CVE-2024-47177, an attacker can execute arbitrary commands remotely on the target machine without authentication when a malicious printer is printed to. | ||||
| CVE-2024-47175 | 3 Debian, Openprinting, Redhat | 8 Debian Linux, Libppd, Enterprise Linux and 5 more | 2025-11-03 | 8.6 High |
| CUPS is a standards-based, open-source printing system, and `libppd` can be used for legacy PPD file support. The `libppd` function `ppdCreatePPDFromIPP2` does not sanitize IPP attributes when creating the PPD buffer. When used in combination with other functions such as `cfGetPrinterAttributes5`, can result in user controlled input and ultimately code execution via Foomatic. This vulnerability can be part of an exploit chain leading to remote code execution (RCE), as described in CVE-2024-47176. | ||||
| CVE-2024-47076 | 2 Openprinting, Redhat | 7 Libcupsfilters, Enterprise Linux, Rhel Aus and 4 more | 2025-11-03 | 8.6 High |
| CUPS is a standards-based, open-source printing system, and `libcupsfilters` contains the code of the filters of the former `cups-filters` package as library functions to be used for the data format conversion tasks needed in Printer Applications. The `cfGetPrinterAttributes5` function in `libcupsfilters` does not sanitize IPP attributes returned from an IPP server. When these IPP attributes are used, for instance, to generate a PPD file, this can lead to attacker controlled data to be provided to the rest of the CUPS system. | ||||
| CVE-2024-46858 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-11-03 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: Fix uaf in __timer_delete_sync There are two paths to access mptcp_pm_del_add_timer, result in a race condition: CPU1 CPU2 ==== ==== net_rx_action napi_poll netlink_sendmsg __napi_poll netlink_unicast process_backlog netlink_unicast_kernel __netif_receive_skb genl_rcv __netif_receive_skb_one_core netlink_rcv_skb NF_HOOK genl_rcv_msg ip_local_deliver_finish genl_family_rcv_msg ip_protocol_deliver_rcu genl_family_rcv_msg_doit tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit tcp_v4_do_rcv mptcp_nl_remove_addrs_list tcp_rcv_established mptcp_pm_remove_addrs_and_subflows tcp_data_queue remove_anno_list_by_saddr mptcp_incoming_options mptcp_pm_del_add_timer mptcp_pm_del_add_timer kfree(entry) In remove_anno_list_by_saddr(running on CPU2), after leaving the critical zone protected by "pm.lock", the entry will be released, which leads to the occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1). Keeping a reference to add_timer inside the lock, and calling sk_stop_timer_sync() with this reference, instead of "entry->add_timer". Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock, do not directly access any members of the entry outside the pm lock, which can avoid similar "entry->x" uaf. | ||||
| CVE-2025-30427 | 2 Apple, Redhat | 13 Ipados, Iphone Os, Macos and 10 more | 2025-11-03 | 4.3 Medium |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in visionOS 2.4, tvOS 18.4, iPadOS 17.7.6, iOS 18.4 and iPadOS 18.4, macOS Sequoia 15.4, Safari 18.4. Processing maliciously crafted web content may lead to an unexpected Safari crash. | ||||
| CVE-2025-24928 | 3 Netapp, Redhat, Xmlsoft | 28 Active Iq Unified Manager, H300s, H300s Firmware and 25 more | 2025-11-03 | 7.8 High |
| libxml2 before 2.12.10 and 2.13.x before 2.13.6 has a stack-based buffer overflow in xmlSnprintfElements in valid.c. To exploit this, DTD validation must occur for an untrusted document or untrusted DTD. NOTE: this is similar to CVE-2017-9047. | ||||
| CVE-2025-24264 | 2 Apple, Redhat | 11 Ipados, Iphone Os, Macos and 8 more | 2025-11-03 | 9.8 Critical |
| The issue was addressed with improved memory handling. This issue is fixed in visionOS 2.4, tvOS 18.4, iPadOS 17.7.6, iOS 18.4 and iPadOS 18.4, macOS Sequoia 15.4, Safari 18.4. Processing maliciously crafted web content may lead to an unexpected Safari crash. | ||||