Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
15831 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47093 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: intel_pmc_core: fix memleak on registration failure In case device registration fails during module initialisation, the platform device structure needs to be freed using platform_device_put() to properly free all resources (e.g. the device name). | ||||
| CVE-2021-47092 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: VMX: Always clear vmx->fail on emulation_required Revert a relatively recent change that set vmx->fail if the vCPU is in L2 and emulation_required is true, as that behavior is completely bogus. Setting vmx->fail and synthesizing a VM-Exit is contradictory and wrong: (a) it's impossible to have both a VM-Fail and VM-Exit (b) vmcs.EXIT_REASON is not modified on VM-Fail (c) emulation_required refers to guest state and guest state checks are always VM-Exits, not VM-Fails. For KVM specifically, emulation_required is handled before nested exits in __vmx_handle_exit(), thus setting vmx->fail has no immediate effect, i.e. KVM calls into handle_invalid_guest_state() and vmx->fail is ignored. Setting vmx->fail can ultimately result in a WARN in nested_vmx_vmexit() firing when tearing down the VM as KVM never expects vmx->fail to be set when L2 is active, KVM always reflects those errors into L1. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 21158 at arch/x86/kvm/vmx/nested.c:4548 nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Modules linked in: CPU: 0 PID: 21158 Comm: syz-executor.1 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:nested_vmx_vmexit+0x16bd/0x17e0 arch/x86/kvm/vmx/nested.c:4547 Code: <0f> 0b e9 2e f8 ff ff e8 57 b3 5d 00 0f 0b e9 00 f1 ff ff 89 e9 80 Call Trace: vmx_leave_nested arch/x86/kvm/vmx/nested.c:6220 [inline] nested_vmx_free_vcpu+0x83/0xc0 arch/x86/kvm/vmx/nested.c:330 vmx_free_vcpu+0x11f/0x2a0 arch/x86/kvm/vmx/vmx.c:6799 kvm_arch_vcpu_destroy+0x6b/0x240 arch/x86/kvm/x86.c:10989 kvm_vcpu_destroy+0x29/0x90 arch/x86/kvm/../../../virt/kvm/kvm_main.c:441 kvm_free_vcpus arch/x86/kvm/x86.c:11426 [inline] kvm_arch_destroy_vm+0x3ef/0x6b0 arch/x86/kvm/x86.c:11545 kvm_destroy_vm arch/x86/kvm/../../../virt/kvm/kvm_main.c:1189 [inline] kvm_put_kvm+0x751/0xe40 arch/x86/kvm/../../../virt/kvm/kvm_main.c:1220 kvm_vcpu_release+0x53/0x60 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3489 __fput+0x3fc/0x870 fs/file_table.c:280 task_work_run+0x146/0x1c0 kernel/task_work.c:164 exit_task_work include/linux/task_work.h:32 [inline] do_exit+0x705/0x24f0 kernel/exit.c:832 do_group_exit+0x168/0x2d0 kernel/exit.c:929 get_signal+0x1740/0x2120 kernel/signal.c:2852 arch_do_signal_or_restart+0x9c/0x730 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x191/0x220 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x2e/0x70 kernel/entry/common.c:300 do_syscall_64+0x53/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2021-47091 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mac80211: fix locking in ieee80211_start_ap error path We need to hold the local->mtx to release the channel context, as even encoded by the lockdep_assert_held() there. Fix it. | ||||
| CVE-2021-47090 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/hwpoison: clear MF_COUNT_INCREASED before retrying get_any_page() Hulk Robot reported a panic in put_page_testzero() when testing madvise() with MADV_SOFT_OFFLINE. The BUG() is triggered when retrying get_any_page(). This is because we keep MF_COUNT_INCREASED flag in second try but the refcnt is not increased. page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:737! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 5 PID: 2135 Comm: sshd Tainted: G B 5.16.0-rc6-dirty #373 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: release_pages+0x53f/0x840 Call Trace: free_pages_and_swap_cache+0x64/0x80 tlb_flush_mmu+0x6f/0x220 unmap_page_range+0xe6c/0x12c0 unmap_single_vma+0x90/0x170 unmap_vmas+0xc4/0x180 exit_mmap+0xde/0x3a0 mmput+0xa3/0x250 do_exit+0x564/0x1470 do_group_exit+0x3b/0x100 __do_sys_exit_group+0x13/0x20 __x64_sys_exit_group+0x16/0x20 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae Modules linked in: ---[ end trace e99579b570fe0649 ]--- RIP: 0010:release_pages+0x53f/0x840 | ||||
| CVE-2021-47089 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: kfence: fix memory leak when cat kfence objects Hulk robot reported a kmemleak problem: unreferenced object 0xffff93d1d8cc02e8 (size 248): comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s) hex dump (first 32 bytes): 00 40 85 19 d4 93 ff ff 00 10 00 00 00 00 00 00 .@.............. 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: seq_open+0x2a/0x80 full_proxy_open+0x167/0x1e0 do_dentry_open+0x1e1/0x3a0 path_openat+0x961/0xa20 do_filp_open+0xae/0x120 do_sys_openat2+0x216/0x2f0 do_sys_open+0x57/0x80 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff93d419854000 (size 4096): comm "cat", pid 23327, jiffies 4624670141 (age 495992.217s) hex dump (first 32 bytes): 6b 66 65 6e 63 65 2d 23 32 35 30 3a 20 30 78 30 kfence-#250: 0x0 30 30 30 30 30 30 30 37 35 34 62 64 61 31 32 2d 0000000754bda12- backtrace: seq_read_iter+0x313/0x440 seq_read+0x14b/0x1a0 full_proxy_read+0x56/0x80 vfs_read+0xa5/0x1b0 ksys_read+0xa0/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 I find that we can easily reproduce this problem with the following commands: cat /sys/kernel/debug/kfence/objects echo scan > /sys/kernel/debug/kmemleak cat /sys/kernel/debug/kmemleak The leaked memory is allocated in the stack below: do_syscall_64 do_sys_open do_dentry_open full_proxy_open seq_open ---> alloc seq_file vfs_read full_proxy_read seq_read seq_read_iter traverse ---> alloc seq_buf And it should have been released in the following process: do_syscall_64 syscall_exit_to_user_mode exit_to_user_mode_prepare task_work_run ____fput __fput full_proxy_release ---> free here However, the release function corresponding to file_operations is not implemented in kfence. As a result, a memory leak occurs. Therefore, the solution to this problem is to implement the corresponding release function. | ||||
| CVE-2021-47088 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/dbgfs: protect targets destructions with kdamond_lock DAMON debugfs interface iterates current monitoring targets in 'dbgfs_target_ids_read()' while holding the corresponding 'kdamond_lock'. However, it also destructs the monitoring targets in 'dbgfs_before_terminate()' without holding the lock. This can result in a use_after_free bug. This commit avoids the race by protecting the destruction with the corresponding 'kdamond_lock'. | ||||
| CVE-2021-47081 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: habanalabs/gaudi: Fix a potential use after free in gaudi_memset_device_memory Our code analyzer reported a uaf. In gaudi_memset_device_memory, cb is get via hl_cb_kernel_create() with 2 refcount. If hl_cs_allocate_job() failed, the execution runs into release_cb branch. One ref of cb is dropped by hl_cb_put(cb) and could be freed if other thread also drops one ref. Then cb is used by cb->id later, which is a potential uaf. My patch add a variable 'id' to accept the value of cb->id before the hl_cb_put(cb) is called, to avoid the potential uaf. | ||||
| CVE-2021-47080 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/core: Prevent divide-by-zero error triggered by the user The user_entry_size is supplied by the user and later used as a denominator to calculate number of entries. The zero supplied by the user will trigger the following divide-by-zero error: divide error: 0000 [#1] SMP KASAN PTI CPU: 4 PID: 497 Comm: c_repro Not tainted 5.13.0-rc1+ #281 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:ib_uverbs_handler_UVERBS_METHOD_QUERY_GID_TABLE+0x1b1/0x510 Code: 87 59 03 00 00 e8 9f ab 1e ff 48 8d bd a8 00 00 00 e8 d3 70 41 ff 44 0f b7 b5 a8 00 00 00 e8 86 ab 1e ff 31 d2 4c 89 f0 31 ff <49> f7 f5 48 89 d6 48 89 54 24 10 48 89 04 24 e8 1b ad 1e ff 48 8b RSP: 0018:ffff88810416f828 EFLAGS: 00010246 RAX: 0000000000000008 RBX: 1ffff1102082df09 RCX: ffffffff82183f3d RDX: 0000000000000000 RSI: ffff888105f2da00 RDI: 0000000000000000 RBP: ffff88810416fa98 R08: 0000000000000001 R09: ffffed102082df5f R10: ffff88810416faf7 R11: ffffed102082df5e R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000008 R15: ffff88810416faf0 FS: 00007f5715efa740(0000) GS:ffff88811a700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000840 CR3: 000000010c2e0001 CR4: 0000000000370ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ib_uverbs_handler_UVERBS_METHOD_INFO_HANDLES+0x4b0/0x4b0 ib_uverbs_cmd_verbs+0x1546/0x1940 ib_uverbs_ioctl+0x186/0x240 __x64_sys_ioctl+0x38a/0x1220 do_syscall_64+0x3f/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2021-47079 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: ideapad-laptop: fix a NULL pointer dereference The third parameter of dytc_cql_command should not be NULL since it will be dereferenced immediately. | ||||
| CVE-2021-47078 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Clear all QP fields if creation failed rxe_qp_do_cleanup() relies on valid pointer values in QP for the properly created ones, but in case rxe_qp_from_init() failed it was filled with garbage and caused tot the following error. refcount_t: underflow; use-after-free. WARNING: CPU: 1 PID: 12560 at lib/refcount.c:28 refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28 Modules linked in: CPU: 1 PID: 12560 Comm: syz-executor.4 Not tainted 5.12.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:refcount_warn_saturate+0x1d1/0x1e0 lib/refcount.c:28 Code: e9 db fe ff ff 48 89 df e8 2c c2 ea fd e9 8a fe ff ff e8 72 6a a7 fd 48 c7 c7 e0 b2 c1 89 c6 05 dc 3a e6 09 01 e8 ee 74 fb 04 <0f> 0b e9 af fe ff ff 0f 1f 84 00 00 00 00 00 41 56 41 55 41 54 55 RSP: 0018:ffffc900097ceba8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000040000 RSI: ffffffff815bb075 RDI: fffff520012f9d67 RBP: 0000000000000003 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815b4eae R11: 0000000000000000 R12: ffff8880322a4800 R13: ffff8880322a4940 R14: ffff888033044e00 R15: 0000000000000000 FS: 00007f6eb2be3700(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdbe5d41000 CR3: 000000001d181000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __refcount_sub_and_test include/linux/refcount.h:283 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] kref_put include/linux/kref.h:64 [inline] rxe_qp_do_cleanup+0x96f/0xaf0 drivers/infiniband/sw/rxe/rxe_qp.c:805 execute_in_process_context+0x37/0x150 kernel/workqueue.c:3327 rxe_elem_release+0x9f/0x180 drivers/infiniband/sw/rxe/rxe_pool.c:391 kref_put include/linux/kref.h:65 [inline] rxe_create_qp+0x2cd/0x310 drivers/infiniband/sw/rxe/rxe_verbs.c:425 _ib_create_qp drivers/infiniband/core/core_priv.h:331 [inline] ib_create_named_qp+0x2ad/0x1370 drivers/infiniband/core/verbs.c:1231 ib_create_qp include/rdma/ib_verbs.h:3644 [inline] create_mad_qp+0x177/0x2d0 drivers/infiniband/core/mad.c:2920 ib_mad_port_open drivers/infiniband/core/mad.c:3001 [inline] ib_mad_init_device+0xd6f/0x1400 drivers/infiniband/core/mad.c:3092 add_client_context+0x405/0x5e0 drivers/infiniband/core/device.c:717 enable_device_and_get+0x1cd/0x3b0 drivers/infiniband/core/device.c:1331 ib_register_device drivers/infiniband/core/device.c:1413 [inline] ib_register_device+0x7c7/0xa50 drivers/infiniband/core/device.c:1365 rxe_register_device+0x3d5/0x4a0 drivers/infiniband/sw/rxe/rxe_verbs.c:1147 rxe_add+0x12fe/0x16d0 drivers/infiniband/sw/rxe/rxe.c:247 rxe_net_add+0x8c/0xe0 drivers/infiniband/sw/rxe/rxe_net.c:503 rxe_newlink drivers/infiniband/sw/rxe/rxe.c:269 [inline] rxe_newlink+0xb7/0xe0 drivers/infiniband/sw/rxe/rxe.c:250 nldev_newlink+0x30e/0x550 drivers/infiniband/core/nldev.c:1555 rdma_nl_rcv_msg+0x36d/0x690 drivers/infiniband/core/netlink.c:195 rdma_nl_rcv_skb drivers/infiniband/core/netlink.c:239 [inline] rdma_nl_rcv+0x2ee/0x430 drivers/infiniband/core/netlink.c:259 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x3a/0xb0 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0 ---truncated--- | ||||
| CVE-2021-47077 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: qedf: Add pointer checks in qedf_update_link_speed() The following trace was observed: [ 14.042059] Call Trace: [ 14.042061] <IRQ> [ 14.042068] qedf_link_update+0x144/0x1f0 [qedf] [ 14.042117] qed_link_update+0x5c/0x80 [qed] [ 14.042135] qed_mcp_handle_link_change+0x2d2/0x410 [qed] [ 14.042155] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042170] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042186] ? qed_rd+0x13/0x40 [qed] [ 14.042205] qed_mcp_handle_events+0x437/0x690 [qed] [ 14.042221] ? qed_set_ptt+0x70/0x80 [qed] [ 14.042239] qed_int_sp_dpc+0x3a6/0x3e0 [qed] [ 14.042245] tasklet_action_common.isra.14+0x5a/0x100 [ 14.042250] __do_softirq+0xe4/0x2f8 [ 14.042253] irq_exit+0xf7/0x100 [ 14.042255] do_IRQ+0x7f/0xd0 [ 14.042257] common_interrupt+0xf/0xf [ 14.042259] </IRQ> API qedf_link_update() is getting called from QED but by that time shost_data is not initialised. This results in a NULL pointer dereference when we try to dereference shost_data while updating supported_speeds. Add a NULL pointer check before dereferencing shost_data. | ||||
| CVE-2021-47075 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvmet: fix memory leak in nvmet_alloc_ctrl() When creating ctrl in nvmet_alloc_ctrl(), if the cntlid_min is larger than cntlid_max of the subsystem, and jumps to the "out_free_changed_ns_list" label, but the ctrl->sqs lack of be freed. Fix this by jumping to the "out_free_sqs" label. | ||||
| CVE-2021-47074 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme-loop: fix memory leak in nvme_loop_create_ctrl() When creating loop ctrl in nvme_loop_create_ctrl(), if nvme_init_ctrl() fails, the loop ctrl should be freed before jumping to the "out" label. | ||||
| CVE-2021-47073 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-smbios-wmi: Fix oops on rmmod dell_smbios init_dell_smbios_wmi() only registers the dell_smbios_wmi_driver on systems where the Dell WMI interface is supported. While exit_dell_smbios_wmi() unregisters it unconditionally, this leads to the following oops: [ 175.722921] ------------[ cut here ]------------ [ 175.722925] Unexpected driver unregister! [ 175.722939] WARNING: CPU: 1 PID: 3630 at drivers/base/driver.c:194 driver_unregister+0x38/0x40 ... [ 175.723089] Call Trace: [ 175.723094] cleanup_module+0x5/0xedd [dell_smbios] ... [ 175.723148] ---[ end trace 064c34e1ad49509d ]--- Make the unregister happen on the same condition the register happens to fix this. | ||||
| CVE-2021-47072 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: fix removed dentries still existing after log is synced When we move one inode from one directory to another and both the inode and its previous parent directory were logged before, we are not supposed to have the dentry for the old parent if we have a power failure after the log is synced. Only the new dentry is supposed to exist. Generally this works correctly, however there is a scenario where this is not currently working, because the old parent of the file/directory that was moved is not authoritative for a range that includes the dir index and dir item keys of the old dentry. This case is better explained with the following example and reproducer: # The test requires a very specific layout of keys and items in the # fs/subvolume btree to trigger the bug. So we want to make sure that # on whatever platform we are, we have the same leaf/node size. # # Currently in btrfs the node/leaf size can not be smaller than the page # size (but it can be greater than the page size). So use the largest # supported node/leaf size (64K). $ mkfs.btrfs -f -n 65536 /dev/sdc $ mount /dev/sdc /mnt # "testdir" is inode 257. $ mkdir /mnt/testdir $ chmod 755 /mnt/testdir # Create several empty files to have the directory "testdir" with its # items spread over several leaves (7 in this case). $ for ((i = 1; i <= 1200; i++)); do echo -n > /mnt/testdir/file$i done # Create our test directory "dira", inode number 1458, which gets all # its items in leaf 7. # # The BTRFS_DIR_ITEM_KEY item for inode 257 ("testdir") that points to # the entry named "dira" is in leaf 2, while the BTRFS_DIR_INDEX_KEY # item that points to that entry is in leaf 3. # # For this particular filesystem node size (64K), file count and file # names, we endup with the directory entry items from inode 257 in # leaves 2 and 3, as previously mentioned - what matters for triggering # the bug exercised by this test case is that those items are not placed # in leaf 1, they must be placed in a leaf different from the one # containing the inode item for inode 257. # # The corresponding BTRFS_DIR_ITEM_KEY and BTRFS_DIR_INDEX_KEY items for # the parent inode (257) are the following: # # item 460 key (257 DIR_ITEM 3724298081) itemoff 48344 itemsize 34 # location key (1458 INODE_ITEM 0) type DIR # transid 6 data_len 0 name_len 4 # name: dira # # and: # # item 771 key (257 DIR_INDEX 1202) itemoff 36673 itemsize 34 # location key (1458 INODE_ITEM 0) type DIR # transid 6 data_len 0 name_len 4 # name: dira $ mkdir /mnt/testdir/dira # Make sure everything done so far is durably persisted. $ sync # Now do a change to inode 257 ("testdir") that does not result in # COWing leaves 2 and 3 - the leaves that contain the directory items # pointing to inode 1458 (directory "dira"). # # Changing permissions, the owner/group, updating or adding a xattr, # etc, will not change (COW) leaves 2 and 3. So for the sake of # simplicity change the permissions of inode 257, which results in # updating its inode item and therefore change (COW) only leaf 1. $ chmod 700 /mnt/testdir # Now fsync directory inode 257. # # Since only the first leaf was changed/COWed, we log the inode item of # inode 257 and only the dentries found in the first leaf, all have a # key type of BTRFS_DIR_ITEM_KEY, and no keys of type # BTRFS_DIR_INDEX_KEY, because they sort after the former type and none # exist in the first leaf. # # We also log 3 items that represent ranges for dir items and dir # indexes for which the log is authoritative: # # 1) a key of type BTRFS_DIR_LOG_ITEM_KEY, which indicates the log is # authoritative for all BTRFS_DIR_ITEM_KEY keys that have an offset # in the range [0, 2285968570] (the offset here is th ---truncated--- | ||||
| CVE-2021-47071 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: uio_hv_generic: Fix a memory leak in error handling paths If 'vmbus_establish_gpadl()' fails, the (recv|send)_gpadl will not be updated and 'hv_uio_cleanup()' in the error handling path will not be able to free the corresponding buffer. In such a case, we need to free the buffer explicitly. | ||||
| CVE-2021-47069 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry do_mq_timedreceive calls wq_sleep with a stack local address. The sender (do_mq_timedsend) uses this address to later call pipelined_send. This leads to a very hard to trigger race where a do_mq_timedreceive call might return and leave do_mq_timedsend to rely on an invalid address, causing the following crash: RIP: 0010:wake_q_add_safe+0x13/0x60 Call Trace: __x64_sys_mq_timedsend+0x2a9/0x490 do_syscall_64+0x80/0x680 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5928e40343 The race occurs as: 1. do_mq_timedreceive calls wq_sleep with the address of `struct ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it holds a valid `struct ext_wait_queue *` as long as the stack has not been overwritten. 2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call __pipelined_op. 3. Sender calls __pipelined_op::smp_store_release(&this->state, STATE_READY). Here is where the race window begins. (`this` is `ewq_addr`.) 4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it will see `state == STATE_READY` and break. 5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's stack. (Although the address may not get overwritten until another function happens to touch it, which means it can persist around for an indefinite time.) 6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a `struct ext_wait_queue *`, and uses it to find a task_struct to pass to the wake_q_add_safe call. In the lucky case where nothing has overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct. In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a bogus address as the receiver's task_struct causing the crash. do_mq_timedsend::__pipelined_op() should not dereference `this` after setting STATE_READY, as the receiver counterpart is now free to return. Change __pipelined_op to call wake_q_add_safe on the receiver's task_struct returned by get_task_struct, instead of dereferencing `this` which sits on the receiver's stack. As Manfred pointed out, the race potentially also exists in ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix those in the same way. | ||||
| CVE-2021-47068 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/nfc: fix use-after-free llcp_sock_bind/connect Commits 8a4cd82d ("nfc: fix refcount leak in llcp_sock_connect()") and c33b1cc62 ("nfc: fix refcount leak in llcp_sock_bind()") fixed a refcount leak bug in bind/connect but introduced a use-after-free if the same local is assigned to 2 different sockets. This can be triggered by the following simple program: int sock1 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP ); int sock2 = socket( AF_NFC, SOCK_STREAM, NFC_SOCKPROTO_LLCP ); memset( &addr, 0, sizeof(struct sockaddr_nfc_llcp) ); addr.sa_family = AF_NFC; addr.nfc_protocol = NFC_PROTO_NFC_DEP; bind( sock1, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) ) bind( sock2, (struct sockaddr*) &addr, sizeof(struct sockaddr_nfc_llcp) ) close(sock1); close(sock2); Fix this by assigning NULL to llcp_sock->local after calling nfc_llcp_local_put. This addresses CVE-2021-23134. | ||||
| CVE-2021-47067 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: soc/tegra: regulators: Fix locking up when voltage-spread is out of range Fix voltage coupler lockup which happens when voltage-spread is out of range due to a bug in the code. The max-spread requirement shall be accounted when CPU regulator doesn't have consumers. This problem is observed on Tegra30 Ouya game console once system-wide DVFS is enabled in a device-tree. | ||||
| CVE-2021-47066 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: async_xor: increase src_offs when dropping destination page Now we support sharing one page if PAGE_SIZE is not equal stripe size. To support this, it needs to support calculating xor value with different offsets for each r5dev. One offset array is used to record those offsets. In RMW mode, parity page is used as a source page. It sets ASYNC_TX_XOR_DROP_DST before calculating xor value in ops_run_prexor5. So it needs to add src_list and src_offs at the same time. Now it only needs src_list. So the xor value which is calculated is wrong. It can cause data corruption problem. I can reproduce this problem 100% on a POWER8 machine. The steps are: mdadm -CR /dev/md0 -l5 -n3 /dev/sdb1 /dev/sdc1 /dev/sdd1 --size=3G mkfs.xfs /dev/md0 mount /dev/md0 /mnt/test mount: /mnt/test: mount(2) system call failed: Structure needs cleaning. | ||||