Filtered by vendor Linux
Subscriptions
Total
15937 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-26617 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: move mmu notification mechanism inside mm lock Move mmu notification mechanism inside mm lock to prevent race condition in other components which depend on it. The notifier will invalidate memory range. Depending upon the number of iterations, different memory ranges would be invalidated. The following warning would be removed by this patch: WARNING: CPU: 0 PID: 5067 at arch/x86/kvm/../../../virt/kvm/kvm_main.c:734 kvm_mmu_notifier_change_pte+0x860/0x960 arch/x86/kvm/../../../virt/kvm/kvm_main.c:734 There is no behavioural and performance change with this patch when there is no component registered with the mmu notifier. [akpm@linux-foundation.org: narrow the scope of `range', per Sean] | ||||
| CVE-2024-26616 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: scrub: avoid use-after-free when chunk length is not 64K aligned [BUG] There is a bug report that, on a ext4-converted btrfs, scrub leads to various problems, including: - "unable to find chunk map" errors BTRFS info (device vdb): scrub: started on devid 1 BTRFS critical (device vdb): unable to find chunk map for logical 2214744064 length 4096 BTRFS critical (device vdb): unable to find chunk map for logical 2214744064 length 45056 This would lead to unrepariable errors. - Use-after-free KASAN reports: ================================================================== BUG: KASAN: slab-use-after-free in __blk_rq_map_sg+0x18f/0x7c0 Read of size 8 at addr ffff8881013c9040 by task btrfs/909 CPU: 0 PID: 909 Comm: btrfs Not tainted 6.7.0-x64v3-dbg #11 c50636e9419a8354555555245df535e380563b2b Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 2023.11-2 12/24/2023 Call Trace: <TASK> dump_stack_lvl+0x43/0x60 print_report+0xcf/0x640 kasan_report+0xa6/0xd0 __blk_rq_map_sg+0x18f/0x7c0 virtblk_prep_rq.isra.0+0x215/0x6a0 [virtio_blk 19a65eeee9ae6fcf02edfad39bb9ddee07dcdaff] virtio_queue_rqs+0xc4/0x310 [virtio_blk 19a65eeee9ae6fcf02edfad39bb9ddee07dcdaff] blk_mq_flush_plug_list.part.0+0x780/0x860 __blk_flush_plug+0x1ba/0x220 blk_finish_plug+0x3b/0x60 submit_initial_group_read+0x10a/0x290 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] flush_scrub_stripes+0x38e/0x430 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_stripe+0x82a/0xae0 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_chunk+0x178/0x200 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] scrub_enumerate_chunks+0x4bc/0xa30 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] btrfs_scrub_dev+0x398/0x810 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] btrfs_ioctl+0x4b9/0x3020 [btrfs e57987a360bed82fe8756dcd3e0de5406ccfe965] __x64_sys_ioctl+0xbd/0x100 do_syscall_64+0x5d/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b RIP: 0033:0x7f47e5e0952b - Crash, mostly due to above use-after-free [CAUSE] The converted fs has the following data chunk layout: item 2 key (FIRST_CHUNK_TREE CHUNK_ITEM 2214658048) itemoff 16025 itemsize 80 length 86016 owner 2 stripe_len 65536 type DATA|single For above logical bytenr 2214744064, it's at the chunk end (2214658048 + 86016 = 2214744064). This means btrfs_submit_bio() would split the bio, and trigger endio function for both of the two halves. However scrub_submit_initial_read() would only expect the endio function to be called once, not any more. This means the first endio function would already free the bbio::bio, leaving the bvec freed, thus the 2nd endio call would lead to use-after-free. [FIX] - Make sure scrub_read_endio() only updates bits in its range Since we may read less than 64K at the end of the chunk, we should not touch the bits beyond chunk boundary. - Make sure scrub_submit_initial_read() only to read the chunk range This is done by calculating the real number of sectors we need to read, and add sector-by-sector to the bio. Thankfully the scrub read repair path won't need extra fixes: - scrub_stripe_submit_repair_read() With above fixes, we won't update error bit for range beyond chunk, thus scrub_stripe_submit_repair_read() should never submit any read beyond the chunk. | ||||
| CVE-2024-26615 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/smc: fix illegal rmb_desc access in SMC-D connection dump A crash was found when dumping SMC-D connections. It can be reproduced by following steps: - run nginx/wrk test: smc_run nginx smc_run wrk -t 16 -c 1000 -d <duration> -H 'Connection: Close' <URL> - continuously dump SMC-D connections in parallel: watch -n 1 'smcss -D' BUG: kernel NULL pointer dereference, address: 0000000000000030 CPU: 2 PID: 7204 Comm: smcss Kdump: loaded Tainted: G E 6.7.0+ #55 RIP: 0010:__smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag] Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x66/0x150 ? exc_page_fault+0x69/0x140 ? asm_exc_page_fault+0x26/0x30 ? __smc_diag_dump.constprop.0+0x5e5/0x620 [smc_diag] ? __kmalloc_node_track_caller+0x35d/0x430 ? __alloc_skb+0x77/0x170 smc_diag_dump_proto+0xd0/0xf0 [smc_diag] smc_diag_dump+0x26/0x60 [smc_diag] netlink_dump+0x19f/0x320 __netlink_dump_start+0x1dc/0x300 smc_diag_handler_dump+0x6a/0x80 [smc_diag] ? __pfx_smc_diag_dump+0x10/0x10 [smc_diag] sock_diag_rcv_msg+0x121/0x140 ? __pfx_sock_diag_rcv_msg+0x10/0x10 netlink_rcv_skb+0x5a/0x110 sock_diag_rcv+0x28/0x40 netlink_unicast+0x22a/0x330 netlink_sendmsg+0x1f8/0x420 __sock_sendmsg+0xb0/0xc0 ____sys_sendmsg+0x24e/0x300 ? copy_msghdr_from_user+0x62/0x80 ___sys_sendmsg+0x7c/0xd0 ? __do_fault+0x34/0x160 ? do_read_fault+0x5f/0x100 ? do_fault+0xb0/0x110 ? __handle_mm_fault+0x2b0/0x6c0 __sys_sendmsg+0x4d/0x80 do_syscall_64+0x69/0x180 entry_SYSCALL_64_after_hwframe+0x6e/0x76 It is possible that the connection is in process of being established when we dump it. Assumed that the connection has been registered in a link group by smc_conn_create() but the rmb_desc has not yet been initialized by smc_buf_create(), thus causing the illegal access to conn->rmb_desc. So fix it by checking before dump. | ||||
| CVE-2024-26614 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tcp: make sure init the accept_queue's spinlocks once When I run syz's reproduction C program locally, it causes the following issue: pvqspinlock: lock 0xffff9d181cd5c660 has corrupted value 0x0! WARNING: CPU: 19 PID: 21160 at __pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 RIP: 0010:__pv_queued_spin_unlock_slowpath (kernel/locking/qspinlock_paravirt.h:508) Code: 73 56 3a ff 90 c3 cc cc cc cc 8b 05 bb 1f 48 01 85 c0 74 05 c3 cc cc cc cc 8b 17 48 89 fe 48 c7 c7 30 20 ce 8f e8 ad 56 42 ff <0f> 0b c3 cc cc cc cc 0f 0b 0f 1f 40 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffa8d200604cb8 EFLAGS: 00010282 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9d1ef60e0908 RDX: 00000000ffffffd8 RSI: 0000000000000027 RDI: ffff9d1ef60e0900 RBP: ffff9d181cd5c280 R08: 0000000000000000 R09: 00000000ffff7fff R10: ffffa8d200604b68 R11: ffffffff907dcdc8 R12: 0000000000000000 R13: ffff9d181cd5c660 R14: ffff9d1813a3f330 R15: 0000000000001000 FS: 00007fa110184640(0000) GS:ffff9d1ef60c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000000 CR3: 000000011f65e000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_unlock (kernel/locking/spinlock.c:186) inet_csk_reqsk_queue_add (net/ipv4/inet_connection_sock.c:1321) inet_csk_complete_hashdance (net/ipv4/inet_connection_sock.c:1358) tcp_check_req (net/ipv4/tcp_minisocks.c:868) tcp_v4_rcv (net/ipv4/tcp_ipv4.c:2260) ip_protocol_deliver_rcu (net/ipv4/ip_input.c:205) ip_local_deliver_finish (net/ipv4/ip_input.c:234) __netif_receive_skb_one_core (net/core/dev.c:5529) process_backlog (./include/linux/rcupdate.h:779) __napi_poll (net/core/dev.c:6533) net_rx_action (net/core/dev.c:6604) __do_softirq (./arch/x86/include/asm/jump_label.h:27) do_softirq (kernel/softirq.c:454 kernel/softirq.c:441) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:381) __dev_queue_xmit (net/core/dev.c:4374) ip_finish_output2 (./include/net/neighbour.h:540 net/ipv4/ip_output.c:235) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) tcp_rcv_synsent_state_process (net/ipv4/tcp_input.c:6469) tcp_rcv_state_process (net/ipv4/tcp_input.c:6657) tcp_v4_do_rcv (net/ipv4/tcp_ipv4.c:1929) __release_sock (./include/net/sock.h:1121 net/core/sock.c:2968) release_sock (net/core/sock.c:3536) inet_wait_for_connect (net/ipv4/af_inet.c:609) __inet_stream_connect (net/ipv4/af_inet.c:702) inet_stream_connect (net/ipv4/af_inet.c:748) __sys_connect (./include/linux/file.h:45 net/socket.c:2064) __x64_sys_connect (net/socket.c:2073 net/socket.c:2070 net/socket.c:2070) do_syscall_64 (arch/x86/entry/common.c:51 arch/x86/entry/common.c:82) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:129) RIP: 0033:0x7fa10ff05a3d Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ab a3 0e 00 f7 d8 64 89 01 48 RSP: 002b:00007fa110183de8 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020000054 RCX: 00007fa10ff05a3d RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000003 RBP: 00007fa110183e20 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 00007fa110184640 R13: 0000000000000000 R14: 00007fa10fe8b060 R15: 00007fff73e23b20 </TASK> The issue triggering process is analyzed as follows: Thread A Thread B tcp_v4_rcv //receive ack TCP packet inet_shutdown tcp_check_req tcp_disconnect //disconnect sock ... tcp_set_state(sk, TCP_CLOSE) inet_csk_complete_hashdance ... inet_csk_reqsk_queue_add ---truncated--- | ||||
| CVE-2024-26612 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs, fscache: Prevent Oops in fscache_put_cache() This function dereferences "cache" and then checks if it's IS_ERR_OR_NULL(). Check first, then dereference. | ||||
| CVE-2024-26611 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xsk: fix usage of multi-buffer BPF helpers for ZC XDP Currently when packet is shrunk via bpf_xdp_adjust_tail() and memory type is set to MEM_TYPE_XSK_BUFF_POOL, null ptr dereference happens: [1136314.192256] BUG: kernel NULL pointer dereference, address: 0000000000000034 [1136314.203943] #PF: supervisor read access in kernel mode [1136314.213768] #PF: error_code(0x0000) - not-present page [1136314.223550] PGD 0 P4D 0 [1136314.230684] Oops: 0000 [#1] PREEMPT SMP NOPTI [1136314.239621] CPU: 8 PID: 54203 Comm: xdpsock Not tainted 6.6.0+ #257 [1136314.250469] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [1136314.265615] RIP: 0010:__xdp_return+0x6c/0x210 [1136314.274653] Code: ad 00 48 8b 47 08 49 89 f8 a8 01 0f 85 9b 01 00 00 0f 1f 44 00 00 f0 41 ff 48 34 75 32 4c 89 c7 e9 79 cd 80 ff 83 fe 03 75 17 <f6> 41 34 01 0f 85 02 01 00 00 48 89 cf e9 22 cc 1e 00 e9 3d d2 86 [1136314.302907] RSP: 0018:ffffc900089f8db0 EFLAGS: 00010246 [1136314.312967] RAX: ffffc9003168aed0 RBX: ffff8881c3300000 RCX: 0000000000000000 [1136314.324953] RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffffc9003168c000 [1136314.336929] RBP: 0000000000000ae0 R08: 0000000000000002 R09: 0000000000010000 [1136314.348844] R10: ffffc9000e495000 R11: 0000000000000040 R12: 0000000000000001 [1136314.360706] R13: 0000000000000524 R14: ffffc9003168aec0 R15: 0000000000000001 [1136314.373298] FS: 00007f8df8bbcb80(0000) GS:ffff8897e0e00000(0000) knlGS:0000000000000000 [1136314.386105] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1136314.396532] CR2: 0000000000000034 CR3: 00000001aa912002 CR4: 00000000007706f0 [1136314.408377] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1136314.420173] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1136314.431890] PKRU: 55555554 [1136314.439143] Call Trace: [1136314.446058] <IRQ> [1136314.452465] ? __die+0x20/0x70 [1136314.459881] ? page_fault_oops+0x15b/0x440 [1136314.468305] ? exc_page_fault+0x6a/0x150 [1136314.476491] ? asm_exc_page_fault+0x22/0x30 [1136314.484927] ? __xdp_return+0x6c/0x210 [1136314.492863] bpf_xdp_adjust_tail+0x155/0x1d0 [1136314.501269] bpf_prog_ccc47ae29d3b6570_xdp_sock_prog+0x15/0x60 [1136314.511263] ice_clean_rx_irq_zc+0x206/0xc60 [ice] [1136314.520222] ? ice_xmit_zc+0x6e/0x150 [ice] [1136314.528506] ice_napi_poll+0x467/0x670 [ice] [1136314.536858] ? ttwu_do_activate.constprop.0+0x8f/0x1a0 [1136314.546010] __napi_poll+0x29/0x1b0 [1136314.553462] net_rx_action+0x133/0x270 [1136314.561619] __do_softirq+0xbe/0x28e [1136314.569303] do_softirq+0x3f/0x60 This comes from __xdp_return() call with xdp_buff argument passed as NULL which is supposed to be consumed by xsk_buff_free() call. To address this properly, in ZC case, a node that represents the frag being removed has to be pulled out of xskb_list. Introduce appropriate xsk helpers to do such node operation and use them accordingly within bpf_xdp_adjust_tail(). | ||||
| CVE-2024-26610 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: fix a memory corruption iwl_fw_ini_trigger_tlv::data is a pointer to a __le32, which means that if we copy to iwl_fw_ini_trigger_tlv::data + offset while offset is in bytes, we'll write past the buffer. | ||||
| CVE-2024-26608 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix global oob in ksmbd_nl_policy Similar to a reported issue (check the commit b33fb5b801c6 ("net: qualcomm: rmnet: fix global oob in rmnet_policy"), my local fuzzer finds another global out-of-bounds read for policy ksmbd_nl_policy. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff8f24b100 by task syz-executor.1/62810 CPU: 0 PID: 62810 Comm: syz-executor.1 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 __nlmsg_parse include/net/netlink.h:748 [inline] genl_family_rcv_msg_attrs_parse.constprop.0+0x1b0/0x290 net/netlink/genetlink.c:565 genl_family_rcv_msg_doit+0xda/0x330 net/netlink/genetlink.c:734 genl_family_rcv_msg net/netlink/genetlink.c:833 [inline] genl_rcv_msg+0x441/0x780 net/netlink/genetlink.c:850 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 genl_rcv+0x24/0x40 net/netlink/genetlink.c:861 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdd66a8f359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdd65e00168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdd66bbcf80 RCX: 00007fdd66a8f359 RDX: 0000000000000000 RSI: 0000000020000500 RDI: 0000000000000003 RBP: 00007fdd66ada493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffc84b81aff R14: 00007fdd65e00300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: ksmbd_nl_policy+0x100/0xa80 The buggy address belongs to the physical page: page:0000000034f47940 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1ccc4b flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00073312c8 ffffea00073312c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff8f24b000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffffffff8f24b080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffffffff8f24b100: f9 f9 f9 f9 00 00 f9 f9 f9 f9 f9 f9 00 00 07 f9 ^ ffffffff8f24b180: f9 f9 f9 f9 00 05 f9 f9 f9 f9 f9 f9 00 00 00 05 ffffffff8f24b200: f9 f9 f9 f9 00 00 03 f9 f9 f9 f9 f9 00 00 04 f9 ================================================================== To fix it, add a placeholder named __KSMBD_EVENT_MAX and let KSMBD_EVENT_MAX to be its original value - 1 according to what other netlink families do. Also change two sites that refer the KSMBD_EVENT_MAX to correct value. | ||||
| CVE-2024-26607 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: sii902x: Fix probing race issue A null pointer dereference crash has been observed rarely on TI platforms using sii9022 bridge: [ 53.271356] sii902x_get_edid+0x34/0x70 [sii902x] [ 53.276066] sii902x_bridge_get_edid+0x14/0x20 [sii902x] [ 53.281381] drm_bridge_get_edid+0x20/0x34 [drm] [ 53.286305] drm_bridge_connector_get_modes+0x8c/0xcc [drm_kms_helper] [ 53.292955] drm_helper_probe_single_connector_modes+0x190/0x538 [drm_kms_helper] [ 53.300510] drm_client_modeset_probe+0x1f0/0xbd4 [drm] [ 53.305958] __drm_fb_helper_initial_config_and_unlock+0x50/0x510 [drm_kms_helper] [ 53.313611] drm_fb_helper_initial_config+0x48/0x58 [drm_kms_helper] [ 53.320039] drm_fbdev_dma_client_hotplug+0x84/0xd4 [drm_dma_helper] [ 53.326401] drm_client_register+0x5c/0xa0 [drm] [ 53.331216] drm_fbdev_dma_setup+0xc8/0x13c [drm_dma_helper] [ 53.336881] tidss_probe+0x128/0x264 [tidss] [ 53.341174] platform_probe+0x68/0xc4 [ 53.344841] really_probe+0x188/0x3c4 [ 53.348501] __driver_probe_device+0x7c/0x16c [ 53.352854] driver_probe_device+0x3c/0x10c [ 53.357033] __device_attach_driver+0xbc/0x158 [ 53.361472] bus_for_each_drv+0x88/0xe8 [ 53.365303] __device_attach+0xa0/0x1b4 [ 53.369135] device_initial_probe+0x14/0x20 [ 53.373314] bus_probe_device+0xb0/0xb4 [ 53.377145] deferred_probe_work_func+0xcc/0x124 [ 53.381757] process_one_work+0x1f0/0x518 [ 53.385770] worker_thread+0x1e8/0x3dc [ 53.389519] kthread+0x11c/0x120 [ 53.392750] ret_from_fork+0x10/0x20 The issue here is as follows: - tidss probes, but is deferred as sii902x is still missing. - sii902x starts probing and enters sii902x_init(). - sii902x calls drm_bridge_add(). Now the sii902x bridge is ready from DRM's perspective. - sii902x calls sii902x_audio_codec_init() and platform_device_register_data() - The registration of the audio platform device causes probing of the deferred devices. - tidss probes, which eventually causes sii902x_bridge_get_edid() to be called. - sii902x_bridge_get_edid() tries to use the i2c to read the edid. However, the sii902x driver has not set up the i2c part yet, leading to the crash. Fix this by moving the drm_bridge_add() to the end of the sii902x_init(), which is also at the very end of sii902x_probe(). | ||||
| CVE-2024-26602 | 2 Linux, Redhat | 9 Linux Kernel, Enterprise Linux, Openshift and 6 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/membarrier: reduce the ability to hammer on sys_membarrier On some systems, sys_membarrier can be very expensive, causing overall slowdowns for everything. So put a lock on the path in order to serialize the accesses to prevent the ability for this to be called at too high of a frequency and saturate the machine. | ||||
| CVE-2024-26601 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: regenerate buddy after block freeing failed if under fc replay This mostly reverts commit 6bd97bf273bd ("ext4: remove redundant mb_regenerate_buddy()") and reintroduces mb_regenerate_buddy(). Based on code in mb_free_blocks(), fast commit replay can end up marking as free blocks that are already marked as such. This causes corruption of the buddy bitmap so we need to regenerate it in that case. | ||||
| CVE-2024-26600 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: phy: ti: phy-omap-usb2: Fix NULL pointer dereference for SRP If the external phy working together with phy-omap-usb2 does not implement send_srp(), we may still attempt to call it. This can happen on an idle Ethernet gadget triggering a wakeup for example: configfs-gadget.g1 gadget.0: ECM Suspend configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup ... Unable to handle kernel NULL pointer dereference at virtual address 00000000 when execute ... PC is at 0x0 LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc] ... musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core] usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether] eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4 sch_direct_xmit from __dev_queue_xmit+0x334/0xd88 __dev_queue_xmit from arp_solicit+0xf0/0x268 arp_solicit from neigh_probe+0x54/0x7c neigh_probe from __neigh_event_send+0x22c/0x47c __neigh_event_send from neigh_resolve_output+0x14c/0x1c0 neigh_resolve_output from ip_finish_output2+0x1c8/0x628 ip_finish_output2 from ip_send_skb+0x40/0xd8 ip_send_skb from udp_send_skb+0x124/0x340 udp_send_skb from udp_sendmsg+0x780/0x984 udp_sendmsg from __sys_sendto+0xd8/0x158 __sys_sendto from ret_fast_syscall+0x0/0x58 Let's fix the issue by checking for send_srp() and set_vbus() before calling them. For USB peripheral only cases these both could be NULL. | ||||
| CVE-2024-26599 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pwm: Fix out-of-bounds access in of_pwm_single_xlate() With args->args_count == 2 args->args[2] is not defined. Actually the flags are contained in args->args[1]. | ||||
| CVE-2024-26597 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net: qualcomm: rmnet: fix global oob in rmnet_policy The variable rmnet_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207 CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline] __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdcf2072359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: rmnet_policy+0x30/0xe0 The buggy address belongs to the physical page: page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243 flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9 >ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 ^ ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 According to the comment of `nla_parse_nested_deprecated`, the maxtype should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here. | ||||
| CVE-2024-26594 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate mech token in session setup If client send invalid mech token in session setup request, ksmbd validate and make the error if it is invalid. | ||||
| CVE-2024-26592 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix UAF issue in ksmbd_tcp_new_connection() The race is between the handling of a new TCP connection and its disconnection. It leads to UAF on `struct tcp_transport` in ksmbd_tcp_new_connection() function. | ||||
| CVE-2024-26591 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix re-attachment branch in bpf_tracing_prog_attach The following case can cause a crash due to missing attach_btf: 1) load rawtp program 2) load fentry program with rawtp as target_fd 3) create tracing link for fentry program with target_fd = 0 4) repeat 3 In the end we have: - prog->aux->dst_trampoline == NULL - tgt_prog == NULL (because we did not provide target_fd to link_create) - prog->aux->attach_btf == NULL (the program was loaded with attach_prog_fd=X) - the program was loaded for tgt_prog but we have no way to find out which one BUG: kernel NULL pointer dereference, address: 0000000000000058 Call Trace: <TASK> ? __die+0x20/0x70 ? page_fault_oops+0x15b/0x430 ? fixup_exception+0x22/0x330 ? exc_page_fault+0x6f/0x170 ? asm_exc_page_fault+0x22/0x30 ? bpf_tracing_prog_attach+0x279/0x560 ? btf_obj_id+0x5/0x10 bpf_tracing_prog_attach+0x439/0x560 __sys_bpf+0x1cf4/0x2de0 __x64_sys_bpf+0x1c/0x30 do_syscall_64+0x41/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Return -EINVAL in this situation. | ||||
| CVE-2024-26590 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: erofs: fix inconsistent per-file compression format EROFS can select compression algorithms on a per-file basis, and each per-file compression algorithm needs to be marked in the on-disk superblock for initialization. However, syzkaller can generate inconsistent crafted images that use an unsupported algorithmtype for specific inodes, e.g. use MicroLZMA algorithmtype even it's not set in `sbi->available_compr_algs`. This can lead to an unexpected "BUG: kernel NULL pointer dereference" if the corresponding decompressor isn't built-in. Fix this by checking against `sbi->available_compr_algs` for each m_algorithmformat request. Incorrect !erofs_sb_has_compr_cfgs preset bitmap is now fixed together since it was harmless previously. | ||||
| CVE-2024-26589 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject variable offset alu on PTR_TO_FLOW_KEYS For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation. However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3: (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0, smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...] Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359 bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475 __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with "R7 pointer arithmetic on flow_keys prohibited". | ||||
| CVE-2024-26588 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: BPF: Prevent out-of-bounds memory access The test_tag test triggers an unhandled page fault: # ./test_tag [ 130.640218] CPU 0 Unable to handle kernel paging request at virtual address ffff80001b898004, era == 9000000003137f7c, ra == 9000000003139e70 [ 130.640501] Oops[#3]: [ 130.640553] CPU: 0 PID: 1326 Comm: test_tag Tainted: G D O 6.7.0-rc4-loong-devel-gb62ab1a397cf #47 61985c1d94084daa2432f771daa45b56b10d8d2a [ 130.640764] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 130.640874] pc 9000000003137f7c ra 9000000003139e70 tp 9000000104cb4000 sp 9000000104cb7a40 [ 130.641001] a0 ffff80001b894000 a1 ffff80001b897ff8 a2 000000006ba210be a3 0000000000000000 [ 130.641128] a4 000000006ba210be a5 00000000000000f1 a6 00000000000000b3 a7 0000000000000000 [ 130.641256] t0 0000000000000000 t1 00000000000007f6 t2 0000000000000000 t3 9000000004091b70 [ 130.641387] t4 000000006ba210be t5 0000000000000004 t6 fffffffffffffff0 t7 90000000040913e0 [ 130.641512] t8 0000000000000005 u0 0000000000000dc0 s9 0000000000000009 s0 9000000104cb7ae0 [ 130.641641] s1 00000000000007f6 s2 0000000000000009 s3 0000000000000095 s4 0000000000000000 [ 130.641771] s5 ffff80001b894000 s6 ffff80001b897fb0 s7 9000000004090c50 s8 0000000000000000 [ 130.641900] ra: 9000000003139e70 build_body+0x1fcc/0x4988 [ 130.642007] ERA: 9000000003137f7c build_body+0xd8/0x4988 [ 130.642112] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 130.642261] PRMD: 00000004 (PPLV0 +PIE -PWE) [ 130.642353] EUEN: 00000003 (+FPE +SXE -ASXE -BTE) [ 130.642458] ECFG: 00071c1c (LIE=2-4,10-12 VS=7) [ 130.642554] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 130.642658] BADV: ffff80001b898004 [ 130.642719] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 130.642815] Modules linked in: [last unloaded: bpf_testmod(O)] [ 130.642924] Process test_tag (pid: 1326, threadinfo=00000000f7f4015f, task=000000006499f9fd) [ 130.643062] Stack : 0000000000000000 9000000003380724 0000000000000000 0000000104cb7be8 [ 130.643213] 0000000000000000 25af8d9b6e600558 9000000106250ea0 9000000104cb7ae0 [ 130.643378] 0000000000000000 0000000000000000 9000000104cb7be8 90000000049f6000 [ 130.643538] 0000000000000090 9000000106250ea0 ffff80001b894000 ffff80001b894000 [ 130.643685] 00007ffffb917790 900000000313ca94 0000000000000000 0000000000000000 [ 130.643831] ffff80001b894000 0000000000000ff7 0000000000000000 9000000100468000 [ 130.643983] 0000000000000000 0000000000000000 0000000000000040 25af8d9b6e600558 [ 130.644131] 0000000000000bb7 ffff80001b894048 0000000000000000 0000000000000000 [ 130.644276] 9000000104cb7be8 90000000049f6000 0000000000000090 9000000104cb7bdc [ 130.644423] ffff80001b894000 0000000000000000 00007ffffb917790 90000000032acfb0 [ 130.644572] ... [ 130.644629] Call Trace: [ 130.644641] [<9000000003137f7c>] build_body+0xd8/0x4988 [ 130.644785] [<900000000313ca94>] bpf_int_jit_compile+0x228/0x4ec [ 130.644891] [<90000000032acfb0>] bpf_prog_select_runtime+0x158/0x1b0 [ 130.645003] [<90000000032b3504>] bpf_prog_load+0x760/0xb44 [ 130.645089] [<90000000032b6744>] __sys_bpf+0xbb8/0x2588 [ 130.645175] [<90000000032b8388>] sys_bpf+0x20/0x2c [ 130.645259] [<9000000003f6ab38>] do_syscall+0x7c/0x94 [ 130.645369] [<9000000003121c5c>] handle_syscall+0xbc/0x158 [ 130.645507] [ 130.645539] Code: 380839f6 380831f9 28412bae <24000ca6> 004081ad 0014cb50 004083e8 02bff34c 58008e91 [ 130.645729] [ 130.646418] ---[ end trace 0000000000000000 ]--- On my machine, which has CONFIG_PAGE_SIZE_16KB=y, the test failed at loading a BPF prog with 2039 instructions: prog = (struct bpf_prog *)ffff80001b894000 insn = (struct bpf_insn *)(prog->insnsi)fff ---truncated--- | ||||