Filtered by vendor Linux
Subscriptions
Total
15955 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-26785 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix protection fault in iommufd_test_syz_conv_iova Syzkaller reported the following bug: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7] Call Trace: lock_acquire lock_acquire+0x1ce/0x4f0 down_read+0x93/0x4a0 iommufd_test_syz_conv_iova+0x56/0x1f0 iommufd_test_access_rw.isra.0+0x2ec/0x390 iommufd_test+0x1058/0x1e30 iommufd_fops_ioctl+0x381/0x510 vfs_ioctl __do_sys_ioctl __se_sys_ioctl __x64_sys_ioctl+0x170/0x1e0 do_syscall_x64 do_syscall_64+0x71/0x140 This is because the new iommufd_access_change_ioas() sets access->ioas to NULL during its process, so the lock might be gone in a concurrent racing context. Fix this by doing the same access->ioas sanity as iommufd_access_rw() and iommufd_access_pin_pages() functions do. | ||||
| CVE-2024-26784 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pmdomain: arm: Fix NULL dereference on scmi_perf_domain removal On unloading of the scmi_perf_domain module got the below splat, when in the DT provided to the system under test the '#power-domain-cells' property was missing. Indeed, this particular setup causes the probe to bail out early without giving any error, which leads to the ->remove() callback gets to run too, but without all the expected initialized structures in place. Add a check and bail out early on remove too. Call trace: scmi_perf_domain_remove+0x28/0x70 [scmi_perf_domain] scmi_dev_remove+0x28/0x40 [scmi_core] device_remove+0x54/0x90 device_release_driver_internal+0x1dc/0x240 driver_detach+0x58/0xa8 bus_remove_driver+0x78/0x108 driver_unregister+0x38/0x70 scmi_driver_unregister+0x28/0x180 [scmi_core] scmi_perf_domain_driver_exit+0x18/0xb78 [scmi_perf_domain] __arm64_sys_delete_module+0x1a8/0x2c0 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0x48/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0xb8 el0t_64_sync_handler+0x100/0x130 el0t_64_sync+0x190/0x198 Code: a90153f3 f9403c14 f9414800 955f8a05 (b9400a80) ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2024-26782 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix double-free on socket dismantle when MPTCP server accepts an incoming connection, it clones its listener socket. However, the pointer to 'inet_opt' for the new socket has the same value as the original one: as a consequence, on program exit it's possible to observe the following splat: BUG: KASAN: double-free in inet_sock_destruct+0x54f/0x8b0 Free of addr ffff888485950880 by task swapper/25/0 CPU: 25 PID: 0 Comm: swapper/25 Kdump: loaded Not tainted 6.8.0-rc1+ #609 Hardware name: Supermicro SYS-6027R-72RF/X9DRH-7TF/7F/iTF/iF, BIOS 3.0 07/26/2013 Call Trace: <IRQ> dump_stack_lvl+0x32/0x50 print_report+0xca/0x620 kasan_report_invalid_free+0x64/0x90 __kasan_slab_free+0x1aa/0x1f0 kfree+0xed/0x2e0 inet_sock_destruct+0x54f/0x8b0 __sk_destruct+0x48/0x5b0 rcu_do_batch+0x34e/0xd90 rcu_core+0x559/0xac0 __do_softirq+0x183/0x5a4 irq_exit_rcu+0x12d/0x170 sysvec_apic_timer_interrupt+0x6b/0x80 </IRQ> <TASK> asm_sysvec_apic_timer_interrupt+0x16/0x20 RIP: 0010:cpuidle_enter_state+0x175/0x300 Code: 30 00 0f 84 1f 01 00 00 83 e8 01 83 f8 ff 75 e5 48 83 c4 18 44 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc fb 45 85 ed <0f> 89 60 ff ff ff 48 c1 e5 06 48 c7 43 18 00 00 00 00 48 83 44 2b RSP: 0018:ffff888481cf7d90 EFLAGS: 00000202 RAX: 0000000000000000 RBX: ffff88887facddc8 RCX: 0000000000000000 RDX: 1ffff1110ff588b1 RSI: 0000000000000019 RDI: ffff88887fac4588 RBP: 0000000000000004 R08: 0000000000000002 R09: 0000000000043080 R10: 0009b02ea273363f R11: ffff88887fabf42b R12: ffffffff932592e0 R13: 0000000000000004 R14: 0000000000000000 R15: 00000022c880ec80 cpuidle_enter+0x4a/0xa0 do_idle+0x310/0x410 cpu_startup_entry+0x51/0x60 start_secondary+0x211/0x270 secondary_startup_64_no_verify+0x184/0x18b </TASK> Allocated by task 6853: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 __kasan_kmalloc+0xa6/0xb0 __kmalloc+0x1eb/0x450 cipso_v4_sock_setattr+0x96/0x360 netlbl_sock_setattr+0x132/0x1f0 selinux_netlbl_socket_post_create+0x6c/0x110 selinux_socket_post_create+0x37b/0x7f0 security_socket_post_create+0x63/0xb0 __sock_create+0x305/0x450 __sys_socket_create.part.23+0xbd/0x130 __sys_socket+0x37/0xb0 __x64_sys_socket+0x6f/0xb0 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x6e/0x76 Freed by task 6858: kasan_save_stack+0x1c/0x40 kasan_save_track+0x10/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x12c/0x1f0 kfree+0xed/0x2e0 inet_sock_destruct+0x54f/0x8b0 __sk_destruct+0x48/0x5b0 subflow_ulp_release+0x1f0/0x250 tcp_cleanup_ulp+0x6e/0x110 tcp_v4_destroy_sock+0x5a/0x3a0 inet_csk_destroy_sock+0x135/0x390 tcp_fin+0x416/0x5c0 tcp_data_queue+0x1bc8/0x4310 tcp_rcv_state_process+0x15a3/0x47b0 tcp_v4_do_rcv+0x2c1/0x990 tcp_v4_rcv+0x41fb/0x5ed0 ip_protocol_deliver_rcu+0x6d/0x9f0 ip_local_deliver_finish+0x278/0x360 ip_local_deliver+0x182/0x2c0 ip_rcv+0xb5/0x1c0 __netif_receive_skb_one_core+0x16e/0x1b0 process_backlog+0x1e3/0x650 __napi_poll+0xa6/0x500 net_rx_action+0x740/0xbb0 __do_softirq+0x183/0x5a4 The buggy address belongs to the object at ffff888485950880 which belongs to the cache kmalloc-64 of size 64 The buggy address is located 0 bytes inside of 64-byte region [ffff888485950880, ffff8884859508c0) The buggy address belongs to the physical page: page:0000000056d1e95e refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888485950700 pfn:0x485950 flags: 0x57ffffc0000800(slab|node=1|zone=2|lastcpupid=0x1fffff) page_type: 0xffffffff() raw: 0057ffffc0000800 ffff88810004c640 ffffea00121b8ac0 dead000000000006 raw: ffff888485950700 0000000000200019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888485950780: fa fb fb ---truncated--- | ||||
| CVE-2024-26781 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix possible deadlock in subflow diag Syzbot and Eric reported a lockdep splat in the subflow diag: WARNING: possible circular locking dependency detected 6.8.0-rc4-syzkaller-00212-g40b9385dd8e6 #0 Not tainted syz-executor.2/24141 is trying to acquire lock: ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] ffff888045870130 (k-sk_lock-AF_INET6){+.+.}-{0:0}, at: tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 but task is already holding lock: ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffffc9000135e488 (&h->lhash2[i].lock){+.+.}-{2:2}, at: inet_diag_dump_icsk+0x39f/0x1f80 net/ipv4/inet_diag.c:1038 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&h->lhash2[i].lock){+.+.}-{2:2}: lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] __inet_hash+0x335/0xbe0 net/ipv4/inet_hashtables.c:743 inet_csk_listen_start+0x23a/0x320 net/ipv4/inet_connection_sock.c:1261 __inet_listen_sk+0x2a2/0x770 net/ipv4/af_inet.c:217 inet_listen+0xa3/0x110 net/ipv4/af_inet.c:239 rds_tcp_listen_init+0x3fd/0x5a0 net/rds/tcp_listen.c:316 rds_tcp_init_net+0x141/0x320 net/rds/tcp.c:577 ops_init+0x352/0x610 net/core/net_namespace.c:136 __register_pernet_operations net/core/net_namespace.c:1214 [inline] register_pernet_operations+0x2cb/0x660 net/core/net_namespace.c:1283 register_pernet_device+0x33/0x80 net/core/net_namespace.c:1370 rds_tcp_init+0x62/0xd0 net/rds/tcp.c:735 do_one_initcall+0x238/0x830 init/main.c:1236 do_initcall_level+0x157/0x210 init/main.c:1298 do_initcalls+0x3f/0x80 init/main.c:1314 kernel_init_freeable+0x42f/0x5d0 init/main.c:1551 kernel_init+0x1d/0x2a0 init/main.c:1441 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1b/0x30 arch/x86/entry/entry_64.S:242 -> #0 (k-sk_lock-AF_INET6){+.+.}-{0:0}: check_prev_add kernel/locking/lockdep.c:3134 [inline] check_prevs_add kernel/locking/lockdep.c:3253 [inline] validate_chain+0x18ca/0x58e0 kernel/locking/lockdep.c:3869 __lock_acquire+0x1345/0x1fd0 kernel/locking/lockdep.c:5137 lock_acquire+0x1e3/0x530 kernel/locking/lockdep.c:5754 lock_sock_fast include/net/sock.h:1723 [inline] subflow_get_info+0x166/0xd20 net/mptcp/diag.c:28 tcp_diag_put_ulp net/ipv4/tcp_diag.c:100 [inline] tcp_diag_get_aux+0x738/0x830 net/ipv4/tcp_diag.c:137 inet_sk_diag_fill+0x10ed/0x1e00 net/ipv4/inet_diag.c:345 inet_diag_dump_icsk+0x55b/0x1f80 net/ipv4/inet_diag.c:1061 __inet_diag_dump+0x211/0x3a0 net/ipv4/inet_diag.c:1263 inet_diag_dump_compat+0x1c1/0x2d0 net/ipv4/inet_diag.c:1371 netlink_dump+0x59b/0xc80 net/netlink/af_netlink.c:2264 __netlink_dump_start+0x5df/0x790 net/netlink/af_netlink.c:2370 netlink_dump_start include/linux/netlink.h:338 [inline] inet_diag_rcv_msg_compat+0x209/0x4c0 net/ipv4/inet_diag.c:1405 sock_diag_rcv_msg+0xe7/0x410 netlink_rcv_skb+0x1e3/0x430 net/netlink/af_netlink.c:2543 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline] netlink_unicast+0x7ea/0x980 net/netlink/af_netlink.c:1367 netlink_sendmsg+0xa3b/0xd70 net/netlink/af_netlink.c:1908 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2584 ___sys_sendmsg net/socket.c:2638 [inline] __sys_sendmsg+0x2b0/0x3a0 net/socket.c:2667 do_syscall_64+0xf9/0x240 entry_SYSCALL_64_after_hwframe+0x6f/0x77 As noted by Eric we can break the lock dependency chain avoid dumping ---truncated--- | ||||
| CVE-2024-26780 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Fix task hung while purging oob_skb in GC. syzbot reported a task hung; at the same time, GC was looping infinitely in list_for_each_entry_safe() for OOB skb. [0] syzbot demonstrated that the list_for_each_entry_safe() was not actually safe in this case. A single skb could have references for multiple sockets. If we free such a skb in the list_for_each_entry_safe(), the current and next sockets could be unlinked in a single iteration. unix_notinflight() uses list_del_init() to unlink the socket, so the prefetched next socket forms a loop itself and list_for_each_entry_safe() never stops. Here, we must use while() and make sure we always fetch the first socket. [0]: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 PID: 5065 Comm: syz-executor236 Not tainted 6.8.0-rc3-syzkaller-00136-g1f719a2f3fa6 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/25/2024 RIP: 0010:preempt_count arch/x86/include/asm/preempt.h:26 [inline] RIP: 0010:check_kcov_mode kernel/kcov.c:173 [inline] RIP: 0010:__sanitizer_cov_trace_pc+0xd/0x60 kernel/kcov.c:207 Code: cc cc cc cc 66 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 0f 1e fa 65 48 8b 14 25 40 c2 03 00 <65> 8b 05 b4 7c 78 7e a9 00 01 ff 00 48 8b 34 24 74 0f f6 c4 01 74 RSP: 0018:ffffc900033efa58 EFLAGS: 00000283 RAX: ffff88807b077800 RBX: ffff88807b077800 RCX: 1ffffffff27b1189 RDX: ffff88802a5a3b80 RSI: ffffffff8968488d RDI: ffff88807b077f70 RBP: ffffc900033efbb0 R08: 0000000000000001 R09: fffffbfff27a900c R10: ffffffff93d48067 R11: ffffffff8ae000eb R12: ffff88807b077800 R13: dffffc0000000000 R14: ffff88807b077e40 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000564f4fc1e3a8 CR3: 000000000d57a000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <NMI> </NMI> <TASK> unix_gc+0x563/0x13b0 net/unix/garbage.c:319 unix_release_sock+0xa93/0xf80 net/unix/af_unix.c:683 unix_release+0x91/0xf0 net/unix/af_unix.c:1064 __sock_release+0xb0/0x270 net/socket.c:659 sock_close+0x1c/0x30 net/socket.c:1421 __fput+0x270/0xb80 fs/file_table.c:376 task_work_run+0x14f/0x250 kernel/task_work.c:180 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xa8a/0x2ad0 kernel/exit.c:871 do_group_exit+0xd4/0x2a0 kernel/exit.c:1020 __do_sys_exit_group kernel/exit.c:1031 [inline] __se_sys_exit_group kernel/exit.c:1029 [inline] __x64_sys_exit_group+0x3e/0x50 kernel/exit.c:1029 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xd5/0x270 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x6f/0x77 RIP: 0033:0x7f9d6cbdac09 Code: Unable to access opcode bytes at 0x7f9d6cbdabdf. RSP: 002b:00007fff5952feb8 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f9d6cbdac09 RDX: 000000000000003c RSI: 00000000000000e7 RDI: 0000000000000000 RBP: 00007f9d6cc552b0 R08: ffffffffffffffb8 R09: 0000000000000006 R10: 0000000000000006 R11: 0000000000000246 R12: 00007f9d6cc552b0 R13: 0000000000000000 R14: 00007f9d6cc55d00 R15: 00007f9d6cbabe70 </TASK> | ||||
| CVE-2024-26779 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix race condition on enabling fast-xmit fast-xmit must only be enabled after the sta has been uploaded to the driver, otherwise it could end up passing the not-yet-uploaded sta via drv_tx calls to the driver, leading to potential crashes because of uninitialized drv_priv data. Add a missing sta->uploaded check and re-check fast xmit after inserting a sta. | ||||
| CVE-2024-26778 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: savage: Error out if pixclock equals zero The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. Although pixclock is checked in savagefb_decode_var(), but it is not checked properly in savagefb_probe(). Fix this by checking whether pixclock is zero in the function savagefb_check_var() before info->var.pixclock is used as the divisor. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8. | ||||
| CVE-2024-26777 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: sis: Error out if pixclock equals zero The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of pixclock, it may cause divide-by-zero error. In sisfb_check_var(), var->pixclock is used as a divisor to caculate drate before it is checked against zero. Fix this by checking it at the beginning. This is similar to CVE-2022-3061 in i740fb which was fixed by commit 15cf0b8. | ||||
| CVE-2024-26773 | 3 Debian, Linux, Redhat | 7 Debian Linux, Linux Kernel, Enterprise Linux and 4 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocating blocks from corrupted group in ext4_mb_try_best_found() Determine if the group block bitmap is corrupted before using ac_b_ex in ext4_mb_try_best_found() to avoid allocating blocks from a group with a corrupted block bitmap in the following concurrency and making the situation worse. ext4_mb_regular_allocator ext4_lock_group(sb, group) ext4_mb_good_group // check if the group bbitmap is corrupted ext4_mb_complex_scan_group // Scan group gets ac_b_ex but doesn't use it ext4_unlock_group(sb, group) ext4_mark_group_bitmap_corrupted(group) // The block bitmap was corrupted during // the group unlock gap. ext4_mb_try_best_found ext4_lock_group(ac->ac_sb, group) ext4_mb_use_best_found mb_mark_used // Allocating blocks in block bitmap corrupted group | ||||
| CVE-2024-26772 | 3 Debian, Linux, Redhat | 7 Debian Linux, Linux Kernel, Enterprise Linux and 4 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ext4: avoid allocating blocks from corrupted group in ext4_mb_find_by_goal() Places the logic for checking if the group's block bitmap is corrupt under the protection of the group lock to avoid allocating blocks from the group with a corrupted block bitmap. | ||||
| CVE-2024-26771 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: ti: edma: Add some null pointer checks to the edma_probe devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. | ||||
| CVE-2024-26770 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: nvidia-shield: Add missing null pointer checks to LED initialization devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Ensure the allocation was successful by checking the pointer validity. [jkosina@suse.com: tweak changelog a bit] | ||||
| CVE-2024-26768 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Change acpi_core_pic[NR_CPUS] to acpi_core_pic[MAX_CORE_PIC] With default config, the value of NR_CPUS is 64. When HW platform has more then 64 cpus, system will crash on these platforms. MAX_CORE_PIC is the maximum cpu number in MADT table (max physical number) which can exceed the supported maximum cpu number (NR_CPUS, max logical number), but kernel should not crash. Kernel should boot cpus with NR_CPUS, let the remainder cpus stay in BIOS. The potential crash reason is that the array acpi_core_pic[NR_CPUS] can be overflowed when parsing MADT table, and it is obvious that CORE_PIC should be corresponding to physical core rather than logical core, so it is better to define the array as acpi_core_pic[MAX_CORE_PIC]. With the patch, system can boot up 64 vcpus with qemu parameter -smp 128, otherwise system will crash with the following message. [ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000420000004259, era == 90000000037a5f0c, ra == 90000000037a46ec [ 0.000000] Oops[#1]: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 6.8.0-rc2+ #192 [ 0.000000] Hardware name: QEMU QEMU Virtual Machine, BIOS unknown 2/2/2022 [ 0.000000] pc 90000000037a5f0c ra 90000000037a46ec tp 9000000003c90000 sp 9000000003c93d60 [ 0.000000] a0 0000000000000019 a1 9000000003d93bc0 a2 0000000000000000 a3 9000000003c93bd8 [ 0.000000] a4 9000000003c93a74 a5 9000000083c93a67 a6 9000000003c938f0 a7 0000000000000005 [ 0.000000] t0 0000420000004201 t1 0000000000000000 t2 0000000000000001 t3 0000000000000001 [ 0.000000] t4 0000000000000003 t5 0000000000000000 t6 0000000000000030 t7 0000000000000063 [ 0.000000] t8 0000000000000014 u0 ffffffffffffffff s9 0000000000000000 s0 9000000003caee98 [ 0.000000] s1 90000000041b0480 s2 9000000003c93da0 s3 9000000003c93d98 s4 9000000003c93d90 [ 0.000000] s5 9000000003caa000 s6 000000000a7fd000 s7 000000000f556b60 s8 000000000e0a4330 [ 0.000000] ra: 90000000037a46ec platform_init+0x214/0x250 [ 0.000000] ERA: 90000000037a5f0c efi_runtime_init+0x30/0x94 [ 0.000000] CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) [ 0.000000] PRMD: 00000000 (PPLV0 -PIE -PWE) [ 0.000000] EUEN: 00000000 (-FPE -SXE -ASXE -BTE) [ 0.000000] ECFG: 00070800 (LIE=11 VS=7) [ 0.000000] ESTAT: 00010000 [PIL] (IS= ECode=1 EsubCode=0) [ 0.000000] BADV: 0000420000004259 [ 0.000000] PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) [ 0.000000] Modules linked in: [ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____)) [ 0.000000] Stack : 9000000003c93a14 9000000003800898 90000000041844f8 90000000037a46ec [ 0.000000] 000000000a7fd000 0000000008290000 0000000000000000 0000000000000000 [ 0.000000] 0000000000000000 0000000000000000 00000000019d8000 000000000f556b60 [ 0.000000] 000000000a7fd000 000000000f556b08 9000000003ca7700 9000000003800000 [ 0.000000] 9000000003c93e50 9000000003800898 9000000003800108 90000000037a484c [ 0.000000] 000000000e0a4330 000000000f556b60 000000000a7fd000 000000000f556b08 [ 0.000000] 9000000003ca7700 9000000004184000 0000000000200000 000000000e02b018 [ 0.000000] 000000000a7fd000 90000000037a0790 9000000003800108 0000000000000000 [ 0.000000] 0000000000000000 000000000e0a4330 000000000f556b60 000000000a7fd000 [ 0.000000] 000000000f556b08 000000000eaae298 000000000eaa5040 0000000000200000 [ 0.000000] ... [ 0.000000] Call Trace: [ 0.000000] [<90000000037a5f0c>] efi_runtime_init+0x30/0x94 [ 0.000000] [<90000000037a46ec>] platform_init+0x214/0x250 [ 0.000000] [<90000000037a484c>] setup_arch+0x124/0x45c [ 0.000000] [<90000000037a0790>] start_kernel+0x90/0x670 [ 0.000000] [<900000000378b0d8>] kernel_entry+0xd8/0xdc | ||||
| CVE-2024-26765 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Disable IRQ before init_fn() for nonboot CPUs Disable IRQ before init_fn() for nonboot CPUs when hotplug, in order to silence such warnings (and also avoid potential errors due to unexpected interrupts): WARNING: CPU: 1 PID: 0 at kernel/rcu/tree.c:4503 rcu_cpu_starting+0x214/0x280 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 pc 90000000048e3334 ra 90000000047bd56c tp 900000010039c000 sp 900000010039fdd0 a0 0000000000000001 a1 0000000000000006 a2 900000000802c040 a3 0000000000000000 a4 0000000000000001 a5 0000000000000004 a6 0000000000000000 a7 90000000048e3f4c t0 0000000000000001 t1 9000000005c70968 t2 0000000004000000 t3 000000000005e56e t4 00000000000002e4 t5 0000000000001000 t6 ffffffff80000000 t7 0000000000040000 t8 9000000007931638 u0 0000000000000006 s9 0000000000000004 s0 0000000000000001 s1 9000000006356ac0 s2 9000000007244000 s3 0000000000000001 s4 0000000000000001 s5 900000000636f000 s6 7fffffffffffffff s7 9000000002123940 s8 9000000001ca55f8 ra: 90000000047bd56c tlb_init+0x24c/0x528 ERA: 90000000048e3334 rcu_cpu_starting+0x214/0x280 CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE) PRMD: 00000000 (PPLV0 -PIE -PWE) EUEN: 00000000 (-FPE -SXE -ASXE -BTE) ECFG: 00071000 (LIE=12 VS=7) ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0) PRID: 0014c010 (Loongson-64bit, Loongson-3A5000) CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.6.17+ #1198 Stack : 0000000000000000 9000000006375000 9000000005b61878 900000010039c000 900000010039fa30 0000000000000000 900000010039fa38 900000000619a140 9000000006456888 9000000006456880 900000010039f950 0000000000000001 0000000000000001 cb0cb028ec7e52e1 0000000002b90000 9000000100348700 0000000000000000 0000000000000001 ffffffff916d12f1 0000000000000003 0000000000040000 9000000007930370 0000000002b90000 0000000000000004 9000000006366000 900000000619a140 0000000000000000 0000000000000004 0000000000000000 0000000000000009 ffffffffffc681f2 9000000002123940 9000000001ca55f8 9000000006366000 90000000047a4828 00007ffff057ded8 00000000000000b0 0000000000000000 0000000000000000 0000000000071000 ... Call Trace: [<90000000047a4828>] show_stack+0x48/0x1a0 [<9000000005b61874>] dump_stack_lvl+0x84/0xcc [<90000000047f60ac>] __warn+0x8c/0x1e0 [<9000000005b0ab34>] report_bug+0x1b4/0x280 [<9000000005b63110>] do_bp+0x2d0/0x480 [<90000000047a2e20>] handle_bp+0x120/0x1c0 [<90000000048e3334>] rcu_cpu_starting+0x214/0x280 [<90000000047bd568>] tlb_init+0x248/0x528 [<90000000047a4c44>] per_cpu_trap_init+0x124/0x160 [<90000000047a19f4>] cpu_probe+0x494/0xa00 [<90000000047b551c>] start_secondary+0x3c/0xc0 [<9000000005b66134>] smpboot_entry+0x50/0x58 | ||||
| CVE-2024-26764 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: fs/aio: Restrict kiocb_set_cancel_fn() to I/O submitted via libaio If kiocb_set_cancel_fn() is called for I/O submitted via io_uring, the following kernel warning appears: WARNING: CPU: 3 PID: 368 at fs/aio.c:598 kiocb_set_cancel_fn+0x9c/0xa8 Call trace: kiocb_set_cancel_fn+0x9c/0xa8 ffs_epfile_read_iter+0x144/0x1d0 io_read+0x19c/0x498 io_issue_sqe+0x118/0x27c io_submit_sqes+0x25c/0x5fc __arm64_sys_io_uring_enter+0x104/0xab0 invoke_syscall+0x58/0x11c el0_svc_common+0xb4/0xf4 do_el0_svc+0x2c/0xb0 el0_svc+0x2c/0xa4 el0t_64_sync_handler+0x68/0xb4 el0t_64_sync+0x1a4/0x1a8 Fix this by setting the IOCB_AIO_RW flag for read and write I/O that is submitted by libaio. | ||||
| CVE-2024-26763 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-crypt: don't modify the data when using authenticated encryption It was said that authenticated encryption could produce invalid tag when the data that is being encrypted is modified [1]. So, fix this problem by copying the data into the clone bio first and then encrypt them inside the clone bio. This may reduce performance, but it is needed to prevent the user from corrupting the device by writing data with O_DIRECT and modifying them at the same time. [1] https://lore.kernel.org/all/20240207004723.GA35324@sol.localdomain/T/ | ||||
| CVE-2024-26762 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/pci: Skip to handle RAS errors if CXL.mem device is detached The PCI AER model is an awkward fit for CXL error handling. While the expectation is that a PCI device can escalate to link reset to recover from an AER event, the same reset on CXL amounts to a surprise memory hotplug of massive amounts of memory. At present, the CXL error handler attempts some optimistic error handling to unbind the device from the cxl_mem driver after reaping some RAS register values. This results in a "hopeful" attempt to unplug the memory, but there is no guarantee that will succeed. A subsequent AER notification after the memdev unbind event can no longer assume the registers are mapped. Check for memdev bind before reaping status register values to avoid crashes of the form: BUG: unable to handle page fault for address: ffa00000195e9100 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page [...] RIP: 0010:__cxl_handle_ras+0x30/0x110 [cxl_core] [...] Call Trace: <TASK> ? __die+0x24/0x70 ? page_fault_oops+0x82/0x160 ? kernelmode_fixup_or_oops+0x84/0x110 ? exc_page_fault+0x113/0x170 ? asm_exc_page_fault+0x26/0x30 ? __pfx_dpc_reset_link+0x10/0x10 ? __cxl_handle_ras+0x30/0x110 [cxl_core] ? find_cxl_port+0x59/0x80 [cxl_core] cxl_handle_rp_ras+0xbc/0xd0 [cxl_core] cxl_error_detected+0x6c/0xf0 [cxl_core] report_error_detected+0xc7/0x1c0 pci_walk_bus+0x73/0x90 pcie_do_recovery+0x23f/0x330 Longer term, the unbind and PCI_ERS_RESULT_DISCONNECT behavior might need to be replaced with a new PCI_ERS_RESULT_PANIC. | ||||
| CVE-2024-26761 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cxl/pci: Fix disabling memory if DVSEC CXL Range does not match a CFMWS window The Linux CXL subsystem is built on the assumption that HPA == SPA. That is, the host physical address (HPA) the HDM decoder registers are programmed with are system physical addresses (SPA). During HDM decoder setup, the DVSEC CXL range registers (cxl-3.1, 8.1.3.8) are checked if the memory is enabled and the CXL range is in a HPA window that is described in a CFMWS structure of the CXL host bridge (cxl-3.1, 9.18.1.3). Now, if the HPA is not an SPA, the CXL range does not match a CFMWS window and the CXL memory range will be disabled then. The HDM decoder stops working which causes system memory being disabled and further a system hang during HDM decoder initialization, typically when a CXL enabled kernel boots. Prevent a system hang and do not disable the HDM decoder if the decoder's CXL range is not found in a CFMWS window. Note the change only fixes a hardware hang, but does not implement HPA/SPA translation. Support for this can be added in a follow on patch series. | ||||
| CVE-2024-26760 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: pscsi: Fix bio_put() for error case As of commit 066ff571011d ("block: turn bio_kmalloc into a simple kmalloc wrapper"), a bio allocated by bio_kmalloc() must be freed by bio_uninit() and kfree(). That is not done properly for the error case, hitting WARN and NULL pointer dereference in bio_free(). | ||||
| CVE-2024-26759 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/swap: fix race when skipping swapcache When skipping swapcache for SWP_SYNCHRONOUS_IO, if two or more threads swapin the same entry at the same time, they get different pages (A, B). Before one thread (T0) finishes the swapin and installs page (A) to the PTE, another thread (T1) could finish swapin of page (B), swap_free the entry, then swap out the possibly modified page reusing the same entry. It breaks the pte_same check in (T0) because PTE value is unchanged, causing ABA problem. Thread (T0) will install a stalled page (A) into the PTE and cause data corruption. One possible callstack is like this: CPU0 CPU1 ---- ---- do_swap_page() do_swap_page() with same entry <direct swapin path> <direct swapin path> <alloc page A> <alloc page B> swap_read_folio() <- read to page A swap_read_folio() <- read to page B <slow on later locks or interrupt> <finished swapin first> ... set_pte_at() swap_free() <- entry is free <write to page B, now page A stalled> <swap out page B to same swap entry> pte_same() <- Check pass, PTE seems unchanged, but page A is stalled! swap_free() <- page B content lost! set_pte_at() <- staled page A installed! And besides, for ZRAM, swap_free() allows the swap device to discard the entry content, so even if page (B) is not modified, if swap_read_folio() on CPU0 happens later than swap_free() on CPU1, it may also cause data loss. To fix this, reuse swapcache_prepare which will pin the swap entry using the cache flag, and allow only one thread to swap it in, also prevent any parallel code from putting the entry in the cache. Release the pin after PT unlocked. Racers just loop and wait since it's a rare and very short event. A schedule_timeout_uninterruptible(1) call is added to avoid repeated page faults wasting too much CPU, causing livelock or adding too much noise to perf statistics. A similar livelock issue was described in commit 029c4628b2eb ("mm: swap: get rid of livelock in swapin readahead") Reproducer: This race issue can be triggered easily using a well constructed reproducer and patched brd (with a delay in read path) [1]: With latest 6.8 mainline, race caused data loss can be observed easily: $ gcc -g -lpthread test-thread-swap-race.c && ./a.out Polulating 32MB of memory region... Keep swapping out... Starting round 0... Spawning 65536 workers... 32746 workers spawned, wait for done... Round 0: Error on 0x5aa00, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x395200, expected 32746, got 32743, 3 data loss! Round 0: Error on 0x3fd000, expected 32746, got 32737, 9 data loss! Round 0 Failed, 15 data loss! This reproducer spawns multiple threads sharing the same memory region using a small swap device. Every two threads updates mapped pages one by one in opposite direction trying to create a race, with one dedicated thread keep swapping out the data out using madvise. The reproducer created a reproduce rate of about once every 5 minutes, so the race should be totally possible in production. After this patch, I ran the reproducer for over a few hundred rounds and no data loss observed. Performance overhead is minimal, microbenchmark swapin 10G from 32G zram: Before: 10934698 us After: 11157121 us Cached: 13155355 us (Dropping SWP_SYNCHRONOUS_IO flag) [kasong@tencent.com: v4] | ||||