Filtered by vendor Redhat
Subscriptions
Total
22992 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-24970 | 3 Netapp, Netty, Redhat | 12 Active Iq Unified Manager, Oncommand Insight, Netty and 9 more | 2025-09-05 | 7.5 High |
| Netty, an asynchronous, event-driven network application framework, has a vulnerability starting in version 4.1.91.Final and prior to version 4.1.118.Final. When a special crafted packet is received via SslHandler it doesn't correctly handle validation of such a packet in all cases which can lead to a native crash. Version 4.1.118.Final contains a patch. As workaround its possible to either disable the usage of the native SSLEngine or change the code manually. | ||||
| CVE-2025-4447 | 2 Eclipse, Redhat | 2 Openj9, Enterprise Linux | 2025-09-05 | 7.8 High |
| In Eclipse OpenJ9 versions up to 0.51, when used with OpenJDK version 8 a stack based buffer overflow can be caused by modifying a file on disk that is read when the JVM starts. | ||||
| CVE-2024-7347 | 2 F5, Redhat | 4 Nginx Open Source, Nginx Plus, Enterprise Linux and 1 more | 2025-09-05 | 4.7 Medium |
| NGINX Open Source and NGINX Plus have a vulnerability in the ngx_http_mp4_module, which might allow an attacker to over-read NGINX worker memory resulting in its termination, using a specially crafted mp4 file. The issue only affects NGINX if it is built with the ngx_http_mp4_module and the mp4 directive is used in the configuration file. Additionally, the attack is possible only if an attacker can trigger the processing of a specially crafted mp4 file with the ngx_http_mp4_module. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. | ||||
| CVE-2025-21605 | 4 Debian, Lfprojects, Redhat and 1 more | 9 Debian Linux, Valkey, Discovery and 6 more | 2025-09-05 | 7.5 High |
| Redis is an open source, in-memory database that persists on disk. In versions starting at 2.6 and prior to 7.4.3, An unauthenticated client can cause unlimited growth of output buffers, until the server runs out of memory or is killed. By default, the Redis configuration does not limit the output buffer of normal clients (see client-output-buffer-limit). Therefore, the output buffer can grow unlimitedly over time. As a result, the service is exhausted and the memory is unavailable. When password authentication is enabled on the Redis server, but no password is provided, the client can still cause the output buffer to grow from "NOAUTH" responses until the system will run out of memory. This issue has been patched in version 7.4.3. An additional workaround to mitigate this problem without patching the redis-server executable is to block access to prevent unauthenticated users from connecting to Redis. This can be done in different ways. Either using network access control tools like firewalls, iptables, security groups, etc, or enabling TLS and requiring users to authenticate using client side certificates. | ||||
| CVE-2024-51741 | 2 Redhat, Redis | 2 Enterprise Linux, Redis | 2025-09-05 | 4.4 Medium |
| Redis is an open source, in-memory database that persists on disk. An authenticated with sufficient privileges may create a malformed ACL selector which, when accessed, triggers a server panic and subsequent denial of service. The problem is fixed in Redis 7.2.7 and 7.4.2. | ||||
| CVE-2024-46981 | 3 Debian, Redhat, Redis | 8 Debian Linux, Discovery, Enterprise Linux and 5 more | 2025-09-05 | 7 High |
| Redis is an open source, in-memory database that persists on disk. An authenticated user may use a specially crafted Lua script to manipulate the garbage collector and potentially lead to remote code execution. The problem is fixed in 7.4.2, 7.2.7, and 6.2.17. An additional workaround to mitigate the problem without patching the redis-server executable is to prevent users from executing Lua scripts. This can be done using ACL to restrict EVAL and EVALSHA commands. | ||||
| CVE-2024-52532 | 2 Gnome, Redhat | 2 Libsoup, Enterprise Linux | 2025-09-05 | 7.5 High |
| GNOME libsoup before 3.6.1 has an infinite loop, and memory consumption. during the reading of certain patterns of WebSocket data from clients. | ||||
| CVE-2024-47535 | 3 Microsoft, Netty, Redhat | 5 Windows, Netty, Amq Streams and 2 more | 2025-09-05 | 5.5 Medium |
| Netty is an asynchronous event-driven network application framework for rapid development of maintainable high performance protocol servers & clients. An unsafe reading of environment file could potentially cause a denial of service in Netty. When loaded on an Windows application, Netty attempts to load a file that does not exist. If an attacker creates such a large file, the Netty application crashes. This vulnerability is fixed in 4.1.115. | ||||
| CVE-2024-36620 | 2 Mobyproject, Redhat | 2 Moby, Openshift | 2025-09-05 | 6.5 Medium |
| moby v25.0.0 - v26.0.2 is vulnerable to NULL Pointer Dereference via daemon/images/image_history.go. | ||||
| CVE-2023-6944 | 2 Linuxfoundation, Redhat | 3 Backstage, Red Hat Developer Hub, Rhdh | 2025-09-05 | 5.7 Medium |
| A flaw was found in the Red Hat Developer Hub (RHDH). The catalog-import function leaks GitLab access tokens on the frontend when the base64 encoded GitLab token includes a newline at the end of the string. The sanitized error can display on the frontend, including the raw access token. Upon gaining access to this token and depending on permissions, an attacker could push malicious code to repositories, delete resources in Git, revoke or generate new keys, and sign code illegitimately. | ||||
| CVE-2025-6019 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2025-09-04 | 7 High |
| A Local Privilege Escalation (LPE) vulnerability was found in libblockdev. Generally, the "allow_active" setting in Polkit permits a physically present user to take certain actions based on the session type. Due to the way libblockdev interacts with the udisks daemon, an "allow_active" user on a system may be able escalate to full root privileges on the target host. Normally, udisks mounts user-provided filesystem images with security flags like nosuid and nodev to prevent privilege escalation. However, a local attacker can create a specially crafted XFS image containing a SUID-root shell, then trick udisks into resizing it. This mounts their malicious filesystem with root privileges, allowing them to execute their SUID-root shell and gain complete control of the system. | ||||
| CVE-2024-3596 | 5 Broadcom, Freeradius, Ietf and 2 more | 12 Brocade Sannav, Fabric Operating System, Freeradius and 9 more | 2025-09-04 | 9 Critical |
| RADIUS Protocol under RFC 2865 is susceptible to forgery attacks by a local attacker who can modify any valid Response (Access-Accept, Access-Reject, or Access-Challenge) to any other response using a chosen-prefix collision attack against MD5 Response Authenticator signature. | ||||
| CVE-2025-5988 | 1 Redhat | 2 Ansible Automation Platform, Ansible Automation Platform Developer | 2025-09-04 | 5.3 Medium |
| A flaw was found in the Ansible aap-gateway. Cross-site request forgery (CSRF) origin checking is not done on requests from the gateway to external components, such as the controller, hub, and eda. | ||||
| CVE-2025-5915 | 2 Libarchive, Redhat | 4 Libarchive, Enterprise Linux, Openshift and 1 more | 2025-09-04 | 3.9 Low |
| A vulnerability has been identified in the libarchive library. This flaw can lead to a heap buffer over-read due to the size of a filter block potentially exceeding the Lempel-Ziv-Storer-Schieber (LZSS) window. This means the library may attempt to read beyond the allocated memory buffer, which can result in unpredictable program behavior, crashes (denial of service), or the disclosure of sensitive information from adjacent memory regions. | ||||
| CVE-2025-5918 | 2 Libarchive, Redhat | 4 Libarchive, Enterprise Linux, Openshift and 1 more | 2025-09-04 | 3.9 Low |
| A vulnerability has been identified in the libarchive library. This flaw can be triggered when file streams are piped into bsdtar, potentially allowing for reading past the end of the file. This out-of-bounds read can lead to unintended consequences, including unpredictable program behavior, memory corruption, or a denial-of-service condition. | ||||
| CVE-2025-5917 | 2 Libarchive, Redhat | 4 Libarchive, Enterprise Linux, Openshift and 1 more | 2025-09-04 | 2.8 Low |
| A vulnerability has been identified in the libarchive library. This flaw involves an 'off-by-one' miscalculation when handling prefixes and suffixes for file names. This can lead to a 1-byte write overflow. While seemingly small, such an overflow can corrupt adjacent memory, leading to unpredictable program behavior, crashes, or in specific circumstances, could be leveraged as a building block for more sophisticated exploitation. | ||||
| CVE-2025-5916 | 2 Libarchive, Redhat | 4 Libarchive, Enterprise Linux, Openshift and 1 more | 2025-09-04 | 3.9 Low |
| A vulnerability has been identified in the libarchive library. This flaw involves an integer overflow that can be triggered when processing a Web Archive (WARC) file that claims to have more than INT64_MAX - 4 content bytes. An attacker could craft a malicious WARC archive to induce this overflow, potentially leading to unpredictable program behavior, memory corruption, or a denial-of-service condition within applications that process such archives using libarchive. | ||||
| CVE-2024-30255 | 2 Envoyproxy, Redhat | 3 Envoy, Rhmt, Service Mesh | 2025-09-04 | 5.3 Medium |
| Envoy is a cloud-native, open source edge and service proxy. The HTTP/2 protocol stack in Envoy versions prior to 1.29.3, 1.28.2, 1.27.4, and 1.26.8 are vulnerable to CPU exhaustion due to flood of CONTINUATION frames. Envoy's HTTP/2 codec allows the client to send an unlimited number of CONTINUATION frames even after exceeding Envoy's header map limits. This allows an attacker to send a sequence of CONTINUATION frames without the END_HEADERS bit set causing CPU utilization, consuming approximately 1 core per 300Mbit/s of traffic and culminating in denial of service through CPU exhaustion. Users should upgrade to version 1.29.3, 1.28.2, 1.27.4, or 1.26.8 to mitigate the effects of the CONTINUATION flood. As a workaround, disable HTTP/2 protocol for downstream connections. | ||||
| CVE-2024-32475 | 2 Envoyproxy, Redhat | 2 Envoy, Service Mesh | 2025-09-04 | 7.5 High |
| Envoy is a cloud-native, open source edge and service proxy. When an upstream TLS cluster is used with `auto_sni` enabled, a request containing a `host`/`:authority` header longer than 255 characters triggers an abnormal termination of Envoy process. Envoy does not gracefully handle an error when setting SNI for outbound TLS connection. The error can occur when Envoy attempts to use the `host`/`:authority` header value longer than 255 characters as SNI for outbound TLS connection. SNI length is limited to 255 characters per the standard. Envoy always expects this operation to succeed and abnormally aborts the process when it fails. This vulnerability is fixed in 1.30.1, 1.29.4, 1.28.3, and 1.27.5. | ||||
| CVE-2024-31228 | 2 Redhat, Redis | 3 Discovery, Enterprise Linux, Redis | 2025-09-04 | 5.5 Medium |
| Redis is an open source, in-memory database that persists on disk. Authenticated users can trigger a denial-of-service by using specially crafted, long string match patterns on supported commands such as `KEYS`, `SCAN`, `PSUBSCRIBE`, `FUNCTION LIST`, `COMMAND LIST` and ACL definitions. Matching of extremely long patterns may result in unbounded recursion, leading to stack overflow and process crash. This problem has been fixed in Redis versions 6.2.16, 7.2.6, and 7.4.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. | ||||