Total
12763 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-2043 | 1 Pb-cms Project | 1 Pb-cms | 2025-10-03 | 4.7 Medium |
| A vulnerability was found in LinZhaoguan pb-cms 1.0.0 and classified as critical. This issue affects some unknown processing of the file /admin#themes of the component Add New Topic Handler. The manipulation of the argument Topic Key leads to deserialization. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2014-2346 | 1 Copadata | 2 Zenon Dnp3 Ng Driver, Zenon Dnp3 Process Gateway | 2025-10-02 | N/A |
| COPA-DATA zenon DNP3 NG driver (DNP3 master) 7.10 and 7.11 through 7.11 SP0 build 10238 and zenon DNP3 Process Gateway (DNP3 outstation) 7.11 SP0 build 10238 and earlier allow physically proximate attackers to cause a denial of service (infinite loop and process crash) via crafted input over a serial line. | ||||
| CVE-2014-2345 | 1 Copadata | 2 Zenon Dnp3 Ng Driver, Zenon Dnp3 Process Gateway | 2025-10-02 | N/A |
| COPA-DATA zenon DNP3 NG driver (DNP3 master) 7.10 and 7.11 through 7.11 SP0 build 10238 and zenon DNP3 Process Gateway (DNP3 outstation) 7.11 SP0 build 10238 and earlier allow remote attackers to cause a denial of service (infinite loop and process crash) by sending a crafted DNP3 packet over TCP. | ||||
| CVE-2014-2343 | 1 Trianglemicroworks | 1 Scada Data Gateway | 2025-10-02 | N/A |
| Triangle MicroWorks SCADA Data Gateway before 3.00.0635 allows physically proximate attackers to cause a denial of service (excessive data processing) via a crafted DNP request over a serial line. | ||||
| CVE-2014-2342 | 1 Trianglemicroworks | 1 Scada Data Gateway | 2025-10-02 | N/A |
| Triangle MicroWorks SCADA Data Gateway before 3.00.0635 allows remote attackers to cause a denial of service (excessive data processing) via a crafted DNP3 packet. | ||||
| CVE-2024-45431 | 1 Opensynergy | 1 Blue Sdk | 2025-10-02 | 5.3 Medium |
| OpenSynergy BlueSDK (aka Blue SDK) through 6.x has Improper Input Validation. The specific flaw exists within the BlueSDK Bluetooth stack. The issue results from the lack of proper validation of remote L2CAP channel ID (CID). An attacker can leverage this to create an L2CAP channel with the null identifier assigned as a remote CID. | ||||
| CVE-2025-11149 | 2 @nubosoftware/node-static Project, Node-static Project | 2 @nubosoftware/node-static, Node-static | 2025-10-02 | 7.5 High |
| This affects all versions of the package node-static; all versions of the package @nubosoftware/node-static. The package fails to catch an exception when user input includes null bytes. This allows attackers to access http://host/%00 and crash the server. | ||||
| CVE-2025-59940 | 2 Mkdocs, Mondeja | 2 Mkdocs, Mkdocs-include-markdown-plugin | 2025-10-02 | 6.5 Medium |
| mkdocs-include-markdown-plugin is an Mkdocs Markdown includer plugin. In versions 7.1.7 and below, there is a vulnerability where unvalidated input can collide with substitution placeholders. This issue is fixed in version 7.1.8. | ||||
| CVE-2025-59952 | 1 Minio | 1 Minio | 2025-10-02 | 7.5 High |
| MinIO Java SDK is a Simple Storage Service (aka S3) client to perform bucket and object operations to any Amazon S3 compatible object storage service. In minio-java versions prior to 8.6.0, XML tag values containing references to system properties or environment variables were automatically substituted with their actual values during processing. This unintended behavior could lead to the exposure of sensitive information, including credentials, file paths, or system configuration details, if such references were present in XML content from untrusted sources. This is fixed in version 8.6.0. | ||||
| CVE-2025-10155 | 1 Mmaitre314 | 1 Picklescan | 2025-10-02 | 7.8 High |
| An Improper Input Validation vulnerability in the scanning logic of mmaitre314 picklescan versions up to and including 0.0.30 allows a remote attacker to bypass pickle files security checks by supplying a standard pickle file with a PyTorch-related file extension. When the pickle file incorrectly considered safe is loaded, it can lead to the execution of malicious code. | ||||
| CVE-2025-40836 | 1 Ericsson | 2 Indoor Connect 8855, Indoor Connect 8855 Firmware | 2025-10-02 | 9.8 Critical |
| Ericsson Indoor Connect 8855 contains an improper input validation vulnerability which if exploited can allow an attacker to execute commands with escalated privileges. | ||||
| CVE-2024-33659 | 1 Ami | 1 Aptio V | 2025-10-02 | 8.8 High |
| AMI APTIOV contains a vulnerability in BIOS where an attacker may cause an Improper Input Validation by a local attacker. Successful exploitation of these vulnerabilities may lead to overwriting arbitrary memory and execute arbitrary code at SMM level, also impacting Confidentiality, Integrity, and Availability. | ||||
| CVE-2024-53225 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift When configuring a kernel with PAGE_SIZE=4KB, depending on its setting of CONFIG_CMA_ALIGNMENT, VCMDQ_LOG2SIZE_MAX=19 could fail the alignment test and trigger a WARN_ON: WARNING: at drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:3646 Call trace: arm_smmu_init_one_queue+0x15c/0x210 tegra241_cmdqv_init_structures+0x114/0x338 arm_smmu_device_probe+0xb48/0x1d90 Fix it by capping max_n_shift to CMDQ_MAX_SZ_SHIFT as SMMUv3 CMDQ does. | ||||
| CVE-2024-53094 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/siw: Add sendpage_ok() check to disable MSG_SPLICE_PAGES While running ISER over SIW, the initiator machine encounters a warning from skb_splice_from_iter() indicating that a slab page is being used in send_page. To address this, it is better to add a sendpage_ok() check within the driver itself, and if it returns 0, then MSG_SPLICE_PAGES flag should be disabled before entering the network stack. A similar issue has been discussed for NVMe in this thread: https://lore.kernel.org/all/20240530142417.146696-1-ofir.gal@volumez.com/ WARNING: CPU: 0 PID: 5342 at net/core/skbuff.c:7140 skb_splice_from_iter+0x173/0x320 Call Trace: tcp_sendmsg_locked+0x368/0xe40 siw_tx_hdt+0x695/0xa40 [siw] siw_qp_sq_process+0x102/0xb00 [siw] siw_sq_resume+0x39/0x110 [siw] siw_run_sq+0x74/0x160 [siw] kthread+0xd2/0x100 ret_from_fork+0x34/0x40 ret_from_fork_asm+0x1a/0x30 | ||||
| CVE-2024-50092 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 3.3 Low |
| In the Linux kernel, the following vulnerability has been resolved: net: netconsole: fix wrong warning A warning is triggered when there is insufficient space in the buffer for userdata. However, this is not an issue since userdata will be sent in the next iteration. Current warning message: ------------[ cut here ]------------ WARNING: CPU: 13 PID: 3013042 at drivers/net/netconsole.c:1122 write_ext_msg+0x3b6/0x3d0 ? write_ext_msg+0x3b6/0x3d0 console_flush_all+0x1e9/0x330 The code incorrectly issues a warning when this_chunk is zero, which is a valid scenario. The warning should only be triggered when this_chunk is negative. | ||||
| CVE-2024-50081 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: blk-mq: setup queue ->tag_set before initializing hctx Commit 7b815817aa58 ("blk-mq: add helper for checking if one CPU is mapped to specified hctx") needs to check queue mapping via tag set in hctx's cpuhp handler. However, q->tag_set may not be setup yet when the cpuhp handler is enabled, then kernel oops is triggered. Fix the issue by setup queue tag_set before initializing hctx. | ||||
| CVE-2025-21696 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm: clear uffd-wp PTE/PMD state on mremap() When mremap()ing a memory region previously registered with userfaultfd as write-protected but without UFFD_FEATURE_EVENT_REMAP, an inconsistency in flag clearing leads to a mismatch between the vma flags (which have uffd-wp cleared) and the pte/pmd flags (which do not have uffd-wp cleared). This mismatch causes a subsequent mprotect(PROT_WRITE) to trigger a warning in page_table_check_pte_flags() due to setting the pte to writable while uffd-wp is still set. Fix this by always explicitly clearing the uffd-wp pte/pmd flags on any such mremap() so that the values are consistent with the existing clearing of VM_UFFD_WP. Be careful to clear the logical flag regardless of its physical form; a PTE bit, a swap PTE bit, or a PTE marker. Cover PTE, huge PMD and hugetlb paths. | ||||
| CVE-2024-58084 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool() Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization") introduced a write barrier in probe function to store global '__scm' variable. We all known barriers are paired (see memory-barriers.txt: "Note that write barriers should normally be paired with read or address-dependency barriers"), therefore accessing it from concurrent contexts requires read barrier. Previous commit added such barrier in qcom_scm_is_available(), so let's use that directly. Lack of this read barrier can result in fetching stale '__scm' variable value, NULL, and dereferencing it. Note that barrier in qcom_scm_is_available() satisfies here the control dependency. | ||||
| CVE-2024-57952 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "libfs: fix infinite directory reads for offset dir" The current directory offset allocator (based on mtree_alloc_cyclic) stores the next offset value to return in octx->next_offset. This mechanism typically returns values that increase monotonically over time. Eventually, though, the newly allocated offset value wraps back to a low number (say, 2) which is smaller than other already- allocated offset values. Yu Kuai <yukuai3@huawei.com> reports that, after commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir"), if a directory's offset allocator wraps, existing entries are no longer visible via readdir/getdents because offset_readdir() stops listing entries once an entry's offset is larger than octx->next_offset. These entries vanish persistently -- they can be looked up, but will never again appear in readdir(3) output. The reason for this is that the commit treats directory offsets as monotonically increasing integer values rather than opaque cookies, and introduces this comparison: if (dentry2offset(dentry) >= last_index) { On 64-bit platforms, the directory offset value upper bound is 2^63 - 1. Directory offsets will monotonically increase for millions of years without wrapping. On 32-bit platforms, however, LONG_MAX is 2^31 - 1. The allocator can wrap after only a few weeks (at worst). Revert commit 64a7ce76fb90 ("libfs: fix infinite directory reads for offset dir") to prepare for a fix that can work properly on 32-bit systems and might apply to recent LTS kernels where shmem employs the simple_offset mechanism. | ||||
| CVE-2024-56768 | 1 Linux | 1 Linux Kernel | 2025-10-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP On x86-64 calling bpf_get_smp_processor_id() in a kernel with CONFIG_SMP disabled can trigger the following bug, as pcpu_hot is unavailable: [ 8.471774] BUG: unable to handle page fault for address: 00000000936a290c [ 8.471849] #PF: supervisor read access in kernel mode [ 8.471881] #PF: error_code(0x0000) - not-present page Fix by inlining a return 0 in the !CONFIG_SMP case. | ||||