Filtered by vendor Linux
Subscriptions
Total
16533 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-53602 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix memory leak in WMI firmware stats Memory allocated for firmware pdev, vdev and beacon statistics are not released during rmmod. Fix it by calling ath11k_fw_stats_free() function before hardware unregister. While at it, avoid calling ath11k_fw_stats_free() while processing the firmware stats received in the WMI event because the local list is getting spliced and reinitialised and hence there are no elements in the list after splicing. Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 | ||||
| CVE-2023-53552 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915: mark requests for GuC virtual engines to avoid use-after-free References to i915_requests may be trapped by userspace inside a sync_file or dmabuf (dma-resv) and held indefinitely across different proceses. To counter-act the memory leaks, we try to not to keep references from the request past their completion. On the other side on fence release we need to know if rq->engine is valid and points to hw engine (true for non-virtual requests). To make it possible extra bit has been added to rq->execution_mask, for marking virtual engines. (cherry picked from commit 280410677af763f3871b93e794a199cfcf6fb580) | ||||
| CVE-2023-53551 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: u_serial: Add null pointer check in gserial_resume Consider a case where gserial_disconnect has already cleared gser->ioport. And if a wakeup interrupt triggers afterwards, gserial_resume gets called, which will lead to accessing of gser->ioport and thus causing null pointer dereference.Add a null pointer check to prevent this. Added a static spinlock to prevent gser->ioport from becoming null after the newly added check. | ||||
| CVE-2023-53606 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: clean up potential nfsd_file refcount leaks in COPY codepath There are two different flavors of the nfsd4_copy struct. One is embedded in the compound and is used directly in synchronous copies. The other is dynamically allocated, refcounted and tracked in the client struture. For the embedded one, the cleanup just involves releasing any nfsd_files held on its behalf. For the async one, the cleanup is a bit more involved, and we need to dequeue it from lists, unhash it, etc. There is at least one potential refcount leak in this code now. If the kthread_create call fails, then both the src and dst nfsd_files in the original nfsd4_copy object are leaked. The cleanup in this codepath is also sort of weird. In the async copy case, we'll have up to four nfsd_file references (src and dst for both flavors of copy structure). They are both put at the end of nfsd4_do_async_copy, even though the ones held on behalf of the embedded one outlive that structure. Change it so that we always clean up the nfsd_file refs held by the embedded copy structure before nfsd4_copy returns. Rework cleanup_async_copy to handle both inter and intra copies. Eliminate nfsd4_cleanup_intra_ssc since it now becomes a no-op. | ||||
| CVE-2023-53591 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix deadlock in tc route query code Cited commit causes ABBA deadlock[0] when peer flows are created while holding the devcom rw semaphore. Due to peer flows offload implementation the lock is taken much higher up the call chain and there is no obvious way to easily fix the deadlock. Instead, since tc route query code needs the peer eswitch structure only to perform a lookup in xarray and doesn't perform any sleeping operations with it, refactor the code for lockless execution in following ways: - RCUify the devcom 'data' pointer. When resetting the pointer synchronously wait for RCU grace period before returning. This is fine since devcom is currently only used for synchronization of pairing/unpairing of eswitches which is rare and already expensive as-is. - Wrap all usages of 'paired' boolean in {READ|WRITE}_ONCE(). The flag has already been used in some unlocked contexts without proper annotations (e.g. users of mlx5_devcom_is_paired() function), but it wasn't an issue since all relevant code paths checked it again after obtaining the devcom semaphore. Now it is also used by mlx5_devcom_get_peer_data_rcu() as "best effort" check to return NULL when devcom is being unpaired. Note that while RCU read lock doesn't prevent the unpaired flag from being changed concurrently it still guarantees that reader can continue to use 'data'. - Refactor mlx5e_tc_query_route_vport() function to use new mlx5_devcom_get_peer_data_rcu() API which fixes the deadlock. [0]: [ 164.599612] ====================================================== [ 164.600142] WARNING: possible circular locking dependency detected [ 164.600667] 6.3.0-rc3+ #1 Not tainted [ 164.601021] ------------------------------------------------------ [ 164.601557] handler1/3456 is trying to acquire lock: [ 164.601998] ffff88811f1714b0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}, at: mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.603078] but task is already holding lock: [ 164.603617] ffff88810137fc98 (&comp->sem){++++}-{3:3}, at: mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.604459] which lock already depends on the new lock. [ 164.605190] the existing dependency chain (in reverse order) is: [ 164.605848] -> #1 (&comp->sem){++++}-{3:3}: [ 164.606380] down_read+0x39/0x50 [ 164.606772] mlx5_devcom_get_peer_data+0x37/0x80 [mlx5_core] [ 164.607336] mlx5e_tc_query_route_vport+0x86/0xc0 [mlx5_core] [ 164.607914] mlx5e_tc_tun_route_lookup+0x1a4/0x1d0 [mlx5_core] [ 164.608495] mlx5e_attach_decap_route+0xc6/0x1e0 [mlx5_core] [ 164.609063] mlx5e_tc_add_fdb_flow+0x1ea/0x360 [mlx5_core] [ 164.609627] __mlx5e_add_fdb_flow+0x2d2/0x430 [mlx5_core] [ 164.610175] mlx5e_configure_flower+0x952/0x1a20 [mlx5_core] [ 164.610741] tc_setup_cb_add+0xd4/0x200 [ 164.611146] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 164.611661] fl_change+0xc95/0x18a0 [cls_flower] [ 164.612116] tc_new_tfilter+0x3fc/0xd20 [ 164.612516] rtnetlink_rcv_msg+0x418/0x5b0 [ 164.612936] netlink_rcv_skb+0x54/0x100 [ 164.613339] netlink_unicast+0x190/0x250 [ 164.613746] netlink_sendmsg+0x245/0x4a0 [ 164.614150] sock_sendmsg+0x38/0x60 [ 164.614522] ____sys_sendmsg+0x1d0/0x1e0 [ 164.614934] ___sys_sendmsg+0x80/0xc0 [ 164.615320] __sys_sendmsg+0x51/0x90 [ 164.615701] do_syscall_64+0x3d/0x90 [ 164.616083] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 164.616568] -> #0 (&esw->offloads.encap_tbl_lock){+.+.}-{3:3}: [ 164.617210] __lock_acquire+0x159e/0x26e0 [ 164.617638] lock_acquire+0xc2/0x2a0 [ 164.618018] __mutex_lock+0x92/0xcd0 [ 164.618401] mlx5e_attach_encap+0xd8/0x8b0 [mlx5_core] [ 164.618943] post_process_attr+0x153/0x2d0 [ ---truncated--- | ||||
| CVE-2023-53550 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate: fix global sysfs attribute type In commit 3666062b87ec ("cpufreq: amd-pstate: move to use bus_get_dev_root()") the "amd_pstate" attributes where moved from a dedicated kobject to the cpu root kobject. While the dedicated kobject expects to contain kobj_attributes the root kobject needs device_attributes. As the changed arguments are not used by the callbacks it works most of the time. However CFI will detect this issue: [ 4947.849350] CFI failure at dev_attr_show+0x24/0x60 (target: show_status+0x0/0x70; expected type: 0x8651b1de) ... [ 4947.849409] Call Trace: [ 4947.849410] <TASK> [ 4947.849411] ? __warn+0xcf/0x1c0 [ 4947.849414] ? dev_attr_show+0x24/0x60 [ 4947.849415] ? report_cfi_failure+0x4e/0x60 [ 4947.849417] ? handle_cfi_failure+0x14c/0x1d0 [ 4947.849419] ? __cfi_show_status+0x10/0x10 [ 4947.849420] ? handle_bug+0x4f/0x90 [ 4947.849421] ? exc_invalid_op+0x1a/0x60 [ 4947.849422] ? asm_exc_invalid_op+0x1a/0x20 [ 4947.849424] ? __cfi_show_status+0x10/0x10 [ 4947.849425] ? dev_attr_show+0x24/0x60 [ 4947.849426] sysfs_kf_seq_show+0xa6/0x110 [ 4947.849433] seq_read_iter+0x16c/0x4b0 [ 4947.849436] vfs_read+0x272/0x2d0 [ 4947.849438] ksys_read+0x72/0xe0 [ 4947.849439] do_syscall_64+0x76/0xb0 [ 4947.849440] ? do_user_addr_fault+0x252/0x650 [ 4947.849442] ? exc_page_fault+0x7a/0x1b0 [ 4947.849443] entry_SYSCALL_64_after_hwframe+0x72/0xdc | ||||
| CVE-2023-53549 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: ipset: Rework long task execution when adding/deleting entries When adding/deleting large number of elements in one step in ipset, it can take a reasonable amount of time and can result in soft lockup errors. The patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of consecutive elements to add/delete") tried to fix it by limiting the max elements to process at all. However it was not enough, it is still possible that we get hung tasks. Lowering the limit is not reasonable, so the approach in this patch is as follows: rely on the method used at resizing sets and save the state when we reach a smaller internal batch limit, unlock/lock and proceed from the saved state. Thus we can avoid long continuous tasks and at the same time removed the limit to add/delete large number of elements in one step. The nfnl mutex is held during the whole operation which prevents one to issue other ipset commands in parallel. | ||||
| CVE-2023-53609 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed" The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would cause kernel panic because cmd->device may be freed after returning from scsi_dispatch_cmd(). This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d. | ||||
| CVE-2023-53613 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dax: Fix dax_mapping_release() use after free A CONFIG_DEBUG_KOBJECT_RELEASE test of removing a device-dax region provider (like modprobe -r dax_hmem) yields: kobject: 'mapping0' (ffff93eb460e8800): kobject_release, parent 0000000000000000 (delayed 2000) [..] DEBUG_LOCKS_WARN_ON(1) WARNING: CPU: 23 PID: 282 at kernel/locking/lockdep.c:232 __lock_acquire+0x9fc/0x2260 [..] RIP: 0010:__lock_acquire+0x9fc/0x2260 [..] Call Trace: <TASK> [..] lock_acquire+0xd4/0x2c0 ? ida_free+0x62/0x130 _raw_spin_lock_irqsave+0x47/0x70 ? ida_free+0x62/0x130 ida_free+0x62/0x130 dax_mapping_release+0x1f/0x30 device_release+0x36/0x90 kobject_delayed_cleanup+0x46/0x150 Due to attempting ida_free() on an ida object that has already been freed. Devices typically only hold a reference on their parent while registered. If a child needs a parent object to complete its release it needs to hold a reference that it drops from its release callback. Arrange for a dax_mapping to pin its parent dev_dax instance until dax_mapping_release(). | ||||
| CVE-2023-53616 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: fix invalid free of JFS_IP(ipimap)->i_imap in diUnmount syzbot found an invalid-free in diUnmount: BUG: KASAN: double-free in slab_free mm/slub.c:3661 [inline] BUG: KASAN: double-free in __kmem_cache_free+0x71/0x110 mm/slub.c:3674 Free of addr ffff88806f410000 by task syz-executor131/3632 CPU: 0 PID: 3632 Comm: syz-executor131 Not tainted 6.1.0-rc7-syzkaller-00012-gca57f02295f1 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x28e lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:284 print_report+0x107/0x1f0 mm/kasan/report.c:395 kasan_report_invalid_free+0xac/0xd0 mm/kasan/report.c:460 ____kasan_slab_free+0xfb/0x120 kasan_slab_free include/linux/kasan.h:177 [inline] slab_free_hook mm/slub.c:1724 [inline] slab_free_freelist_hook+0x12e/0x1a0 mm/slub.c:1750 slab_free mm/slub.c:3661 [inline] __kmem_cache_free+0x71/0x110 mm/slub.c:3674 diUnmount+0xef/0x100 fs/jfs/jfs_imap.c:195 jfs_umount+0x108/0x370 fs/jfs/jfs_umount.c:63 jfs_put_super+0x86/0x190 fs/jfs/super.c:194 generic_shutdown_super+0x130/0x310 fs/super.c:492 kill_block_super+0x79/0xd0 fs/super.c:1428 deactivate_locked_super+0xa7/0xf0 fs/super.c:332 cleanup_mnt+0x494/0x520 fs/namespace.c:1186 task_work_run+0x243/0x300 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0x664/0x2070 kernel/exit.c:820 do_group_exit+0x1fd/0x2b0 kernel/exit.c:950 __do_sys_exit_group kernel/exit.c:961 [inline] __se_sys_exit_group kernel/exit.c:959 [inline] __x64_sys_exit_group+0x3b/0x40 kernel/exit.c:959 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd [...] JFS_IP(ipimap)->i_imap is not setting to NULL after free in diUnmount. If jfs_remount() free JFS_IP(ipimap)->i_imap but then failed at diMount(). JFS_IP(ipimap)->i_imap will be freed once again. Fix this problem by setting JFS_IP(ipimap)->i_imap to NULL after free. | ||||
| CVE-2023-53556 | 1 Linux | 1 Linux Kernel | 2025-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: iavf: Fix use-after-free in free_netdev We do netif_napi_add() for all allocated q_vectors[], but potentially do netif_napi_del() for part of them, then kfree q_vectors and leave invalid pointers at dev->napi_list. Reproducer: [root@host ~]# cat repro.sh #!/bin/bash pf_dbsf="0000:41:00.0" vf0_dbsf="0000:41:02.0" g_pids=() function do_set_numvf() { echo 2 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) echo 0 >/sys/bus/pci/devices/${pf_dbsf}/sriov_numvfs sleep $((RANDOM%3+1)) } function do_set_channel() { local nic=$(ls -1 --indicator-style=none /sys/bus/pci/devices/${vf0_dbsf}/net/) [ -z "$nic" ] && { sleep $((RANDOM%3)) ; return 1; } ifconfig $nic 192.168.18.5 netmask 255.255.255.0 ifconfig $nic up ethtool -L $nic combined 1 ethtool -L $nic combined 4 sleep $((RANDOM%3)) } function on_exit() { local pid for pid in "${g_pids[@]}"; do kill -0 "$pid" &>/dev/null && kill "$pid" &>/dev/null done g_pids=() } trap "on_exit; exit" EXIT while :; do do_set_numvf ; done & g_pids+=($!) while :; do do_set_channel ; done & g_pids+=($!) wait Result: [ 4093.900222] ================================================================== [ 4093.900230] BUG: KASAN: use-after-free in free_netdev+0x308/0x390 [ 4093.900232] Read of size 8 at addr ffff88b4dc145640 by task repro.sh/6699 [ 4093.900233] [ 4093.900236] CPU: 10 PID: 6699 Comm: repro.sh Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 4093.900238] Hardware name: Powerleader PR2008AL/H12DSi-N6, BIOS 2.0 04/09/2021 [ 4093.900239] Call Trace: [ 4093.900244] dump_stack+0x71/0xab [ 4093.900249] print_address_description+0x6b/0x290 [ 4093.900251] ? free_netdev+0x308/0x390 [ 4093.900252] kasan_report+0x14a/0x2b0 [ 4093.900254] free_netdev+0x308/0x390 [ 4093.900261] iavf_remove+0x825/0xd20 [iavf] [ 4093.900265] pci_device_remove+0xa8/0x1f0 [ 4093.900268] device_release_driver_internal+0x1c6/0x460 [ 4093.900271] pci_stop_bus_device+0x101/0x150 [ 4093.900273] pci_stop_and_remove_bus_device+0xe/0x20 [ 4093.900275] pci_iov_remove_virtfn+0x187/0x420 [ 4093.900277] ? pci_iov_add_virtfn+0xe10/0xe10 [ 4093.900278] ? pci_get_subsys+0x90/0x90 [ 4093.900280] sriov_disable+0xed/0x3e0 [ 4093.900282] ? bus_find_device+0x12d/0x1a0 [ 4093.900290] i40e_free_vfs+0x754/0x1210 [i40e] [ 4093.900298] ? i40e_reset_all_vfs+0x880/0x880 [i40e] [ 4093.900299] ? pci_get_device+0x7c/0x90 [ 4093.900300] ? pci_get_subsys+0x90/0x90 [ 4093.900306] ? pci_vfs_assigned.part.7+0x144/0x210 [ 4093.900309] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900315] i40e_pci_sriov_configure+0x1fa/0x2e0 [i40e] [ 4093.900318] sriov_numvfs_store+0x214/0x290 [ 4093.900320] ? sriov_totalvfs_show+0x30/0x30 [ 4093.900321] ? __mutex_lock_slowpath+0x10/0x10 [ 4093.900323] ? __check_object_size+0x15a/0x350 [ 4093.900326] kernfs_fop_write+0x280/0x3f0 [ 4093.900329] vfs_write+0x145/0x440 [ 4093.900330] ksys_write+0xab/0x160 [ 4093.900332] ? __ia32_sys_read+0xb0/0xb0 [ 4093.900334] ? fput_many+0x1a/0x120 [ 4093.900335] ? filp_close+0xf0/0x130 [ 4093.900338] do_syscall_64+0xa0/0x370 [ 4093.900339] ? page_fault+0x8/0x30 [ 4093.900341] entry_SYSCALL_64_after_hwframe+0x65/0xca [ 4093.900357] RIP: 0033:0x7f16ad4d22c0 [ 4093.900359] Code: 73 01 c3 48 8b 0d d8 cb 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 89 24 2d 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 fe dd 01 00 48 89 04 24 [ 4093.900360] RSP: 002b:00007ffd6491b7f8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 4093.900362] RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f16ad4d22c0 [ 4093.900363] RDX: 0000000000000002 RSI: 0000000001a41408 RDI: 0000000000000001 [ 4093.900364] RBP: 0000000001a41408 R08: 00007f16ad7a1780 R09: 00007f16ae1f2700 [ 4093.9003 ---truncated--- | ||||
| CVE-2023-53542 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ARM: dts: exynos: Use Exynos5420 compatible for the MIPI video phy For some reason, the driver adding support for Exynos5420 MIPI phy back in 2016 wasn't used on Exynos5420, which caused a kernel panic. Add the proper compatible for it. | ||||
| CVE-2023-53563 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver After loading the amd-pstate-ut driver, amd_pstate_ut_check_perf() and amd_pstate_ut_check_freq() use cpufreq_cpu_get() to get the policy of the CPU and mark it as busy. In these functions, cpufreq_cpu_put() should be used to release the policy, but it is not, so any other entity trying to access the policy is blocked indefinitely. One such scenario is when amd_pstate mode is changed, leading to the following splat: [ 1332.103727] INFO: task bash:2929 blocked for more than 120 seconds. [ 1332.110001] Not tainted 6.5.0-rc2-amd-pstate-ut #5 [ 1332.115315] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 1332.123140] task:bash state:D stack:0 pid:2929 ppid:2873 flags:0x00004006 [ 1332.123143] Call Trace: [ 1332.123145] <TASK> [ 1332.123148] __schedule+0x3c1/0x16a0 [ 1332.123154] ? _raw_read_lock_irqsave+0x2d/0x70 [ 1332.123157] schedule+0x6f/0x110 [ 1332.123160] schedule_timeout+0x14f/0x160 [ 1332.123162] ? preempt_count_add+0x86/0xd0 [ 1332.123165] __wait_for_common+0x92/0x190 [ 1332.123168] ? __pfx_schedule_timeout+0x10/0x10 [ 1332.123170] wait_for_completion+0x28/0x30 [ 1332.123173] cpufreq_policy_put_kobj+0x4d/0x90 [ 1332.123177] cpufreq_policy_free+0x157/0x1d0 [ 1332.123178] ? preempt_count_add+0x58/0xd0 [ 1332.123180] cpufreq_remove_dev+0xb6/0x100 [ 1332.123182] subsys_interface_unregister+0x114/0x120 [ 1332.123185] ? preempt_count_add+0x58/0xd0 [ 1332.123187] ? __pfx_amd_pstate_change_driver_mode+0x10/0x10 [ 1332.123190] cpufreq_unregister_driver+0x3b/0xd0 [ 1332.123192] amd_pstate_change_driver_mode+0x1e/0x50 [ 1332.123194] store_status+0xe9/0x180 [ 1332.123197] dev_attr_store+0x1b/0x30 [ 1332.123199] sysfs_kf_write+0x42/0x50 [ 1332.123202] kernfs_fop_write_iter+0x143/0x1d0 [ 1332.123204] vfs_write+0x2df/0x400 [ 1332.123208] ksys_write+0x6b/0xf0 [ 1332.123210] __x64_sys_write+0x1d/0x30 [ 1332.123213] do_syscall_64+0x60/0x90 [ 1332.123216] ? fpregs_assert_state_consistent+0x2e/0x50 [ 1332.123219] ? exit_to_user_mode_prepare+0x49/0x1a0 [ 1332.123223] ? irqentry_exit_to_user_mode+0xd/0x20 [ 1332.123225] ? irqentry_exit+0x3f/0x50 [ 1332.123226] ? exc_page_fault+0x8e/0x190 [ 1332.123228] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 1332.123232] RIP: 0033:0x7fa74c514a37 [ 1332.123234] RSP: 002b:00007ffe31dd0788 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 1332.123238] RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007fa74c514a37 [ 1332.123239] RDX: 0000000000000008 RSI: 000055e27c447aa0 RDI: 0000000000000001 [ 1332.123241] RBP: 000055e27c447aa0 R08: 00007fa74c5d1460 R09: 000000007fffffff [ 1332.123242] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000008 [ 1332.123244] R13: 00007fa74c61a780 R14: 00007fa74c616600 R15: 00007fa74c615a00 [ 1332.123247] </TASK> Fix this by calling cpufreq_cpu_put() wherever necessary. [ rjw: Subject and changelog edits ] | ||||
| CVE-2023-53536 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-crypto: make blk_crypto_evict_key() more robust If blk_crypto_evict_key() sees that the key is still in-use (due to a bug) or that ->keyslot_evict failed, it currently just returns while leaving the key linked into the keyslot management structures. However, blk_crypto_evict_key() is only called in contexts such as inode eviction where failure is not an option. So actually the caller proceeds with freeing the blk_crypto_key regardless of the return value of blk_crypto_evict_key(). These two assumptions don't match, and the result is that there can be a use-after-free in blk_crypto_reprogram_all_keys() after one of these errors occurs. (Note, these errors *shouldn't* happen; we're just talking about what happens if they do anyway.) Fix this by making blk_crypto_evict_key() unlink the key from the keyslot management structures even on failure. Also improve some comments. | ||||
| CVE-2023-53537 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid use-after-free for cached IPU bio xfstest generic/019 reports a bug: kernel BUG at mm/filemap.c:1619! RIP: 0010:folio_end_writeback+0x8a/0x90 Call Trace: end_page_writeback+0x1c/0x60 f2fs_write_end_io+0x199/0x420 bio_endio+0x104/0x180 submit_bio_noacct+0xa5/0x510 submit_bio+0x48/0x80 f2fs_submit_write_bio+0x35/0x300 f2fs_submit_merged_ipu_write+0x2a0/0x2b0 f2fs_write_single_data_page+0x838/0x8b0 f2fs_write_cache_pages+0x379/0xa30 f2fs_write_data_pages+0x30c/0x340 do_writepages+0xd8/0x1b0 __writeback_single_inode+0x44/0x370 writeback_sb_inodes+0x233/0x4d0 __writeback_inodes_wb+0x56/0xf0 wb_writeback+0x1dd/0x2d0 wb_workfn+0x367/0x4a0 process_one_work+0x21d/0x430 worker_thread+0x4e/0x3c0 kthread+0x103/0x130 ret_from_fork+0x2c/0x50 The root cause is: after cp_error is set, f2fs_submit_merged_ipu_write() in f2fs_write_single_data_page() tries to flush IPU bio in cache, however f2fs_submit_merged_ipu_write() missed to check validity of @bio parameter, result in submitting random cached bio which belong to other IO context, then it will cause use-after-free issue, fix it by adding additional validity check. | ||||
| CVE-2023-53539 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix incomplete state save in rxe_requester If a send packet is dropped by the IP layer in rxe_requester() the call to rxe_xmit_packet() can fail with err == -EAGAIN. To recover, the state of the wqe is restored to the state before the packet was sent so it can be resent. However, the routines that save and restore the state miss a significnt part of the variable state in the wqe, the dma struct which is used to process through the sge table. And, the state is not saved before the packet is built which modifies the dma struct. Under heavy stress testing with many QPs on a fast node sending large messages to a slow node dropped packets are observed and the resent packets are corrupted because the dma struct was not restored. This patch fixes this behavior and allows the test cases to succeed. | ||||
| CVE-2023-53540 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: reject auth/assoc to AP with our address If the AP uses our own address as its MLD address or BSSID, then clearly something's wrong. Reject such connections so we don't try and fail later. | ||||
| CVE-2023-53543 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: vdpa: Add max vqp attr to vdpa_nl_policy for nlattr length check The vdpa_nl_policy structure is used to validate the nlattr when parsing the incoming nlmsg. It will ensure the attribute being described produces a valid nlattr pointer in info->attrs before entering into each handler in vdpa_nl_ops. That is to say, the missing part in vdpa_nl_policy may lead to illegal nlattr after parsing, which could lead to OOB read just like CVE-2023-3773. This patch adds the missing nla_policy for vdpa max vqp attr to avoid such bugs. | ||||
| CVE-2023-53544 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: cpufreq: davinci: Fix clk use after free The remove function first frees the clks and only then calls cpufreq_unregister_driver(). If one of the cpufreq callbacks is called just before cpufreq_unregister_driver() is run, the freed clks might be used. | ||||
| CVE-2023-53546 | 1 Linux | 1 Linux Kernel | 2025-10-06 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5: DR, fix memory leak in mlx5dr_cmd_create_reformat_ctx when mlx5_cmd_exec failed in mlx5dr_cmd_create_reformat_ctx, the memory pointed by 'in' is not released, which will cause memory leak. Move memory release after mlx5_cmd_exec. | ||||