Total
6333 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-52584 | 1 Linux | 2 Kernel, Linux Kernel | 2025-06-19 | 3.8 Low |
| In the Linux kernel, the following vulnerability has been resolved: spmi: mediatek: Fix UAF on device remove The pmif driver data that contains the clocks is allocated along with spmi_controller. On device remove, spmi_controller will be freed first, and then devres , including the clocks, will be cleanup. This leads to UAF because putting the clocks will access the clocks in the pmif driver data, which is already freed along with spmi_controller. This can be reproduced by enabling DEBUG_TEST_DRIVER_REMOVE and building the kernel with KASAN. Fix the UAF issue by using unmanaged clk_bulk_get() and putting the clocks before freeing spmi_controller. | ||||
| CVE-2025-21999 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-06-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: proc: fix UAF in proc_get_inode() Fix race between rmmod and /proc/XXX's inode instantiation. The bug is that pde->proc_ops don't belong to /proc, it belongs to a module, therefore dereferencing it after /proc entry has been registered is a bug unless use_pde/unuse_pde() pair has been used. use_pde/unuse_pde can be avoided (2 atomic ops!) because pde->proc_ops never changes so information necessary for inode instantiation can be saved _before_ proc_register() in PDE itself and used later, avoiding pde->proc_ops->... dereference. rmmod lookup sys_delete_module proc_lookup_de pde_get(de); proc_get_inode(dir->i_sb, de); mod->exit() proc_remove remove_proc_subtree proc_entry_rundown(de); free_module(mod); if (S_ISREG(inode->i_mode)) if (de->proc_ops->proc_read_iter) --> As module is already freed, will trigger UAF BUG: unable to handle page fault for address: fffffbfff80a702b PGD 817fc4067 P4D 817fc4067 PUD 817fc0067 PMD 102ef4067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 26 UID: 0 PID: 2667 Comm: ls Tainted: G Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) RIP: 0010:proc_get_inode+0x302/0x6e0 RSP: 0018:ffff88811c837998 EFLAGS: 00010a06 RAX: dffffc0000000000 RBX: ffffffffc0538140 RCX: 0000000000000007 RDX: 1ffffffff80a702b RSI: 0000000000000001 RDI: ffffffffc0538158 RBP: ffff8881299a6000 R08: 0000000067bbe1e5 R09: 1ffff11023906f20 R10: ffffffffb560ca07 R11: ffffffffb2b43a58 R12: ffff888105bb78f0 R13: ffff888100518048 R14: ffff8881299a6004 R15: 0000000000000001 FS: 00007f95b9686840(0000) GS:ffff8883af100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffffbfff80a702b CR3: 0000000117dd2000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_lookup_de+0x11f/0x2e0 __lookup_slow+0x188/0x350 walk_component+0x2ab/0x4f0 path_lookupat+0x120/0x660 filename_lookup+0x1ce/0x560 vfs_statx+0xac/0x150 __do_sys_newstat+0x96/0x110 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e [adobriyan@gmail.com: don't do 2 atomic ops on the common path] | ||||
| CVE-2024-58013 | 1 Linux | 1 Linux Kernel | 2025-06-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MGMT: Fix slab-use-after-free Read in mgmt_remove_adv_monitor_sync This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 Read of size 8 at addr ffff88814128f898 by task kworker/u9:4/5961 CPU: 1 UID: 0 PID: 5961 Comm: kworker/u9:4 Not tainted 6.12.0-syzkaller-10684-gf1cd565ce577 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x169/0x550 mm/kasan/report.c:489 kasan_report+0x143/0x180 mm/kasan/report.c:602 mgmt_remove_adv_monitor_sync+0x3a/0xd0 net/bluetooth/mgmt.c:5543 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:332 process_one_work kernel/workqueue.c:3229 [inline] process_scheduled_works+0xa63/0x1850 kernel/workqueue.c:3310 worker_thread+0x870/0xd30 kernel/workqueue.c:3391 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 16026: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:377 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:394 kasan_kmalloc include/linux/kasan.h:260 [inline] __kmalloc_cache_noprof+0x243/0x390 mm/slub.c:4314 kmalloc_noprof include/linux/slab.h:901 [inline] kzalloc_noprof include/linux/slab.h:1037 [inline] mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296 remove_adv_monitor+0x102/0x1b0 net/bluetooth/mgmt.c:5568 hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:711 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:726 sock_write_iter+0x2d7/0x3f0 net/socket.c:1147 new_sync_write fs/read_write.c:586 [inline] vfs_write+0xaeb/0xd30 fs/read_write.c:679 ksys_write+0x18f/0x2b0 fs/read_write.c:731 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 16022: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:582 poison_slab_object mm/kasan/common.c:247 [inline] __kasan_slab_free+0x59/0x70 mm/kasan/common.c:264 kasan_slab_free include/linux/kasan.h:233 [inline] slab_free_hook mm/slub.c:2338 [inline] slab_free mm/slub.c:4598 [inline] kfree+0x196/0x420 mm/slub.c:4746 mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259 __mgmt_power_off+0x183/0x430 net/bluetooth/mgmt.c:9550 hci_dev_close_sync+0x6c4/0x11c0 net/bluetooth/hci_sync.c:5208 hci_dev_do_close net/bluetooth/hci_core.c:483 [inline] hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508 sock_do_ioctl+0x158/0x460 net/socket.c:1209 sock_ioctl+0x626/0x8e0 net/socket.c:1328 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:906 [inline] __se_sys_ioctl+0xf5/0x170 fs/ioctl.c:892 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2021-47342 | 1 Linux | 1 Linux Kernel | 2025-06-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix possible UAF when remounting r/o a mmp-protected file system After commit 618f003199c6 ("ext4: fix memory leak in ext4_fill_super"), after the file system is remounted read-only, there is a race where the kmmpd thread can exit, causing sbi->s_mmp_tsk to point at freed memory, which the call to ext4_stop_mmpd() can trip over. Fix this by only allowing kmmpd() to exit when it is stopped via ext4_stop_mmpd(). Bug-Report-Link: <20210629143603.2166962-1-yebin10@huawei.com> | ||||
| CVE-2025-44906 | 1 Jhead Project | 1 Jhead | 2025-06-19 | 7.8 High |
| jhead v3.08 was discovered to contain a heap-use-after-free via the ProcessFile function at jhead.c. | ||||
| CVE-2024-0225 | 2 Fedoraproject, Google | 2 Fedora, Chrome | 2025-06-18 | 8.8 High |
| Use after free in WebGPU in Google Chrome prior to 120.0.6099.199 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2024-0224 | 2 Fedoraproject, Google | 2 Fedora, Chrome | 2025-06-18 | 8.8 High |
| Use after free in WebAudio in Google Chrome prior to 120.0.6099.199 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2024-0222 | 2 Fedoraproject, Google | 2 Fedora, Chrome | 2025-06-18 | 8.8 High |
| Use after free in ANGLE in Google Chrome prior to 120.0.6099.199 allowed a remote attacker who had compromised the renderer process to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2023-49554 | 1 Yasm Project | 1 Yasm | 2025-06-18 | 5.5 Medium |
| Use After Free vulnerability in YASM 1.3.0.86.g9def allows a remote attacker to cause a denial of service via the do_directive function in the modules/preprocs/nasm/nasm-pp.c component. | ||||
| CVE-2022-50216 | 2025-06-18 | 6.0 Medium | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2025-38052 | 2025-06-18 | 7.8 High | ||
| In the Linux kernel, the following vulnerability has been resolved: net/tipc: fix slab-use-after-free Read in tipc_aead_encrypt_done Syzbot reported a slab-use-after-free with the following call trace: ================================================================== BUG: KASAN: slab-use-after-free in tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840 Read of size 8 at addr ffff88807a733000 by task kworker/1:0/25 Call Trace: kasan_report+0xd9/0x110 mm/kasan/report.c:601 tipc_aead_encrypt_done+0x4bd/0x510 net/tipc/crypto.c:840 crypto_request_complete include/crypto/algapi.h:266 aead_request_complete include/crypto/internal/aead.h:85 cryptd_aead_crypt+0x3b8/0x750 crypto/cryptd.c:772 crypto_request_complete include/crypto/algapi.h:266 cryptd_queue_worker+0x131/0x200 crypto/cryptd.c:181 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 Allocated by task 8355: kzalloc_noprof include/linux/slab.h:778 tipc_crypto_start+0xcc/0x9e0 net/tipc/crypto.c:1466 tipc_init_net+0x2dd/0x430 net/tipc/core.c:72 ops_init+0xb9/0x650 net/core/net_namespace.c:139 setup_net+0x435/0xb40 net/core/net_namespace.c:343 copy_net_ns+0x2f0/0x670 net/core/net_namespace.c:508 create_new_namespaces+0x3ea/0xb10 kernel/nsproxy.c:110 unshare_nsproxy_namespaces+0xc0/0x1f0 kernel/nsproxy.c:228 ksys_unshare+0x419/0x970 kernel/fork.c:3323 __do_sys_unshare kernel/fork.c:3394 Freed by task 63: kfree+0x12a/0x3b0 mm/slub.c:4557 tipc_crypto_stop+0x23c/0x500 net/tipc/crypto.c:1539 tipc_exit_net+0x8c/0x110 net/tipc/core.c:119 ops_exit_list+0xb0/0x180 net/core/net_namespace.c:173 cleanup_net+0x5b7/0xbf0 net/core/net_namespace.c:640 process_one_work+0x9fb/0x1b60 kernel/workqueue.c:3231 After freed the tipc_crypto tx by delete namespace, tipc_aead_encrypt_done may still visit it in cryptd_queue_worker workqueue. I reproduce this issue by: ip netns add ns1 ip link add veth1 type veth peer name veth2 ip link set veth1 netns ns1 ip netns exec ns1 tipc bearer enable media eth dev veth1 ip netns exec ns1 tipc node set key this_is_a_master_key master ip netns exec ns1 tipc bearer disable media eth dev veth1 ip netns del ns1 The key of reproduction is that, simd_aead_encrypt is interrupted, leading to crypto_simd_usable() return false. Thus, the cryptd_queue_worker is triggered, and the tipc_crypto tx will be visited. tipc_disc_timeout tipc_bearer_xmit_skb tipc_crypto_xmit tipc_aead_encrypt crypto_aead_encrypt // encrypt() simd_aead_encrypt // crypto_simd_usable() is false child = &ctx->cryptd_tfm->base; simd_aead_encrypt crypto_aead_encrypt // encrypt() cryptd_aead_encrypt_enqueue cryptd_aead_enqueue cryptd_enqueue_request // trigger cryptd_queue_worker queue_work_on(smp_processor_id(), cryptd_wq, &cpu_queue->work) Fix this by holding net reference count before encrypt. | ||||
| CVE-2024-21326 | 1 Microsoft | 1 Edge Chromium | 2025-06-17 | 9.6 Critical |
| Microsoft Edge (Chromium-based) Elevation of Privilege Vulnerability | ||||
| CVE-2024-0775 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-06-17 | 6.7 Medium |
| A use-after-free flaw was found in the __ext4_remount in fs/ext4/super.c in ext4 in the Linux kernel. This flaw allows a local user to cause an information leak problem while freeing the old quota file names before a potential failure, leading to a use-after-free. | ||||
| CVE-2024-21307 | 1 Microsoft | 13 Windows 10 1507, Windows 10 1607, Windows 10 1809 and 10 more | 2025-06-17 | 7.5 High |
| Remote Desktop Client Remote Code Execution Vulnerability | ||||
| CVE-2024-20655 | 1 Microsoft | 6 Windows Server 2008, Windows Server 2012, Windows Server 2016 and 3 more | 2025-06-17 | 6.6 Medium |
| Microsoft Online Certificate Status Protocol (OCSP) Remote Code Execution Vulnerability | ||||
| CVE-2023-37578 | 1 Tonybybell | 1 Gtkwave | 2025-06-17 | 7.8 High |
| Multiple use-after-free vulnerabilities exist in the VCD get_vartoken realloc functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the use-after-free when triggered via the vcd2lxt conversion utility. | ||||
| CVE-2023-37577 | 1 Tonybybell | 1 Gtkwave | 2025-06-17 | 7.8 High |
| Multiple use-after-free vulnerabilities exist in the VCD get_vartoken realloc functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the use-after-free when triggered via the vcd2lxt2 conversion utility. | ||||
| CVE-2023-37576 | 1 Tonybybell | 1 Gtkwave | 2025-06-17 | 7.8 High |
| Multiple use-after-free vulnerabilities exist in the VCD get_vartoken realloc functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the use-after-free when triggered via the vcd2vzt conversion utility. | ||||
| CVE-2023-37575 | 1 Tonybybell | 1 Gtkwave | 2025-06-17 | 7.8 High |
| Multiple use-after-free vulnerabilities exist in the VCD get_vartoken realloc functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the use-after-free when triggered via the GUI's interactive VCD parsing code. | ||||
| CVE-2023-37574 | 1 Tonybybell | 1 Gtkwave | 2025-06-17 | 7.8 High |
| Multiple use-after-free vulnerabilities exist in the VCD get_vartoken realloc functionality of GTKWave 3.3.115. A specially crafted .vcd file can lead to arbitrary code execution. A victim would need to open a malicious file to trigger these vulnerabilities.This vulnerability concerns the use-after-free when triggered via the GUI's legacy VCD parsing code. | ||||