Filtered by vendor Redhat
Subscriptions
Total
22991 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-26306 | 3 Es, Netapp, Redhat | 4 Iperf3, Bootstrap Os, Hci Compute Node and 1 more | 2025-09-26 | 5.9 Medium |
| iPerf3 before 3.17, when used with OpenSSL before 3.2.0 as a server with RSA authentication, allows a timing side channel in RSA decryption operations. This side channel could be sufficient for an attacker to recover credential plaintext. It requires the attacker to send a large number of messages for decryption, as described in "Everlasting ROBOT: the Marvin Attack" by Hubert Kario. | ||||
| CVE-2023-7192 | 2 Linux, Redhat | 7 Linux Kernel, Enterprise Linux, Rhel Aus and 4 more | 2025-09-26 | 5.5 Medium |
| A memory leak problem was found in ctnetlink_create_conntrack in net/netfilter/nf_conntrack_netlink.c in the Linux Kernel. This issue may allow a local attacker with CAP_NET_ADMIN privileges to cause a denial of service (DoS) attack due to a refcount overflow. | ||||
| CVE-2024-57929 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: dm array: fix releasing a faulty array block twice in dm_array_cursor_end When dm_bm_read_lock() fails due to locking or checksum errors, it releases the faulty block implicitly while leaving an invalid output pointer behind. The caller of dm_bm_read_lock() should not operate on this invalid dm_block pointer, or it will lead to undefined result. For example, the dm_array_cursor incorrectly caches the invalid pointer on reading a faulty array block, causing a double release in dm_array_cursor_end(), then hitting the BUG_ON in dm-bufio cache_put(). Reproduce steps: 1. initialize a cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc $262144" dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" 2. wipe the second array block offline dmsteup remove cache cmeta cdata corig mapping_root=$(dd if=/dev/sdc bs=1c count=8 skip=192 \ 2>/dev/null | hexdump -e '1/8 "%u\n"') ablock=$(dd if=/dev/sdc bs=1c count=8 skip=$((4096*mapping_root+2056)) \ 2>/dev/null | hexdump -e '1/8 "%u\n"') dd if=/dev/zero of=/dev/sdc bs=4k count=1 seek=$ablock 3. try reopen the cache device dmsetup create cmeta --table "0 8192 linear /dev/sdc 0" dmsetup create cdata --table "0 65536 linear /dev/sdc 8192" dmsetup create corig --table "0 524288 linear /dev/sdc $262144" dmsetup create cache --table "0 524288 cache /dev/mapper/cmeta \ /dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0" Kernel logs: (snip) device-mapper: array: array_block_check failed: blocknr 0 != wanted 10 device-mapper: block manager: array validator check failed for block 10 device-mapper: array: get_ablock failed device-mapper: cache metadata: dm_array_cursor_next for mapping failed ------------[ cut here ]------------ kernel BUG at drivers/md/dm-bufio.c:638! Fix by setting the cached block pointer to NULL on errors. In addition to the reproducer described above, this fix can be verified using the "array_cursor/damaged" test in dm-unit: dm-unit run /pdata/array_cursor/damaged --kernel-dir <KERNEL_DIR> | ||||
| CVE-2024-27435 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nvme: fix reconnection fail due to reserved tag allocation We found a issue on production environment while using NVMe over RDMA, admin_q reconnect failed forever while remote target and network is ok. After dig into it, we found it may caused by a ABBA deadlock due to tag allocation. In my case, the tag was hold by a keep alive request waiting inside admin_q, as we quiesced admin_q while reset ctrl, so the request maked as idle and will not process before reset success. As fabric_q shares tagset with admin_q, while reconnect remote target, we need a tag for connect command, but the only one reserved tag was held by keep alive command which waiting inside admin_q. As a result, we failed to reconnect admin_q forever. In order to fix this issue, I think we should keep two reserved tags for admin queue. | ||||
| CVE-2024-46713 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/aux: Fix AUX buffer serialization Ole reported that event->mmap_mutex is strictly insufficient to serialize the AUX buffer, add a per RB mutex to fully serialize it. Note that in the lock order comment the perf_event::mmap_mutex order was already wrong, that is, it nesting under mmap_lock is not new with this patch. | ||||
| CVE-2022-48883 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: IPoIB, Block PKEY interfaces with less rx queues than parent A user is able to configure an arbitrary number of rx queues when creating an interface via netlink. This doesn't work for child PKEY interfaces because the child interface uses the parent receive channels. Although the child shares the parent's receive channels, the number of rx queues is important for the channel_stats array: the parent's rx channel index is used to access the child's channel_stats. So the array has to be at least as large as the parent's rx queue size for the counting to work correctly and to prevent out of bound accesses. This patch checks for the mentioned scenario and returns an error when trying to create the interface. The error is propagated to the user. | ||||
| CVE-2024-43880 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mlxsw: spectrum_acl_erp: Fix object nesting warning ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM (A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can contain more ACLs (i.e., tc filters), but the number of masks in each region (i.e., tc chain) is limited. In order to mitigate the effects of the above limitation, the device allows filters to share a single mask if their masks only differ in up to 8 consecutive bits. For example, dst_ip/25 can be represented using dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the number of masks being used (and therefore does not support mask aggregation), but can contain a limited number of filters. The driver uses the "objagg" library to perform the mask aggregation by passing it objects that consist of the filter's mask and whether the filter is to be inserted into the A-TCAM or the C-TCAM since filters in different TCAMs cannot share a mask. The set of created objects is dependent on the insertion order of the filters and is not necessarily optimal. Therefore, the driver will periodically ask the library to compute a more optimal set ("hints") by looking at all the existing objects. When the library asks the driver whether two objects can be aggregated the driver only compares the provided masks and ignores the A-TCAM / C-TCAM indication. This is the right thing to do since the goal is to move as many filters as possible to the A-TCAM. The driver also forbids two identical masks from being aggregated since this can only happen if one was intentionally put in the C-TCAM to avoid a conflict in the A-TCAM. The above can result in the following set of hints: H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta After getting the hints from the library the driver will start migrating filters from one region to another while consulting the computed hints and instructing the device to perform a lookup in both regions during the transition. Assuming a filter with mask X is being migrated into the A-TCAM in the new region, the hints lookup will return H1. Since H2 is the parent of H1, the library will try to find the object associated with it and create it if necessary in which case another hints lookup (recursive) will be performed. This hints lookup for {mask Y, A-TCAM} will either return H2 or H3 since the driver passes the library an object comparison function that ignores the A-TCAM / C-TCAM indication. This can eventually lead to nested objects which are not supported by the library [1]. Fix by removing the object comparison function from both the driver and the library as the driver was the only user. That way the lookup will only return exact matches. I do not have a reliable reproducer that can reproduce the issue in a timely manner, but before the fix the issue would reproduce in several minutes and with the fix it does not reproduce in over an hour. Note that the current usefulness of the hints is limited because they include the C-TCAM indication and represent aggregation that cannot actually happen. This will be addressed in net-next. [1] WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0 Modules linked in: CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42 Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018 Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0 [...] Call Trace: <TASK> __objagg_obj_get+0x2bb/0x580 objagg_obj_get+0xe/0x80 mlxsw_sp_acl_erp_mask_get+0xb5/0xf0 mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0 mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0 mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270 mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510 process_one_work+0x151/0x370 | ||||
| CVE-2024-43870 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exit When a task is scheduled out, pending sigtrap deliveries are deferred to the target task upon resume to userspace via task_work. However failures while adding an event's callback to the task_work engine are ignored. And since the last call for events exit happen after task work is eventually closed, there is a small window during which pending sigtrap can be queued though ignored, leaking the event refcount addition such as in the following scenario: TASK A ----- do_exit() exit_task_work(tsk); <IRQ> perf_event_overflow() event->pending_sigtrap = pending_id; irq_work_queue(&event->pending_irq); </IRQ> =========> PREEMPTION: TASK A -> TASK B event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) // FAILS: task work has exited task_work_add(&event->pending_task) [...] <IRQ WORK> perf_pending_irq() // early return: event->oncpu = -1 </IRQ WORK> [...] =========> TASK B -> TASK A perf_event_exit_task(tsk) perf_event_exit_event() free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // leak event due to unexpected refcount == 2 As a result the event is never released while the task exits. Fix this with appropriate task_work_add()'s error handling. | ||||
| CVE-2024-43869 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: perf: Fix event leak upon exec and file release The perf pending task work is never waited upon the matching event release. In the case of a child event, released via free_event() directly, this can potentially result in a leaked event, such as in the following scenario that doesn't even require a weak IRQ work implementation to trigger: schedule() prepare_task_switch() =======> <NMI> perf_event_overflow() event->pending_sigtrap = ... irq_work_queue(&event->pending_irq) <======= </NMI> perf_event_task_sched_out() event_sched_out() event->pending_sigtrap = 0; atomic_long_inc_not_zero(&event->refcount) task_work_add(&event->pending_task) finish_lock_switch() =======> <IRQ> perf_pending_irq() //do nothing, rely on pending task work <======= </IRQ> begin_new_exec() perf_event_exit_task() perf_event_exit_event() // If is child event free_event() WARN(atomic_long_cmpxchg(&event->refcount, 1, 0) != 1) // event is leaked Similar scenarios can also happen with perf_event_remove_on_exec() or simply against concurrent perf_event_release(). Fix this with synchonizing against the possibly remaining pending task work while freeing the event, just like is done with remaining pending IRQ work. This means that the pending task callback neither need nor should hold a reference to the event, preventing it from ever beeing freed. | ||||
| CVE-2024-46745 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: uinput - reject requests with unreasonable number of slots When exercising uinput interface syzkaller may try setting up device with a really large number of slots, which causes memory allocation failure in input_mt_init_slots(). While this allocation failure is handled properly and request is rejected, it results in syzkaller reports. Additionally, such request may put undue burden on the system which will try to free a lot of memory for a bogus request. Fix it by limiting allowed number of slots to 100. This can easily be extended if we see devices that can track more than 100 contacts. | ||||
| CVE-2024-7254 | 3 Google, Netapp, Redhat | 15 Google-protobuf, Protobuf, Protobuf-java and 12 more | 2025-09-26 | 7.5 High |
| Any project that parses untrusted Protocol Buffers data containing an arbitrary number of nested groups / series of SGROUP tags can corrupted by exceeding the stack limit i.e. StackOverflow. Parsing nested groups as unknown fields with DiscardUnknownFieldsParser or Java Protobuf Lite parser, or against Protobuf map fields, creates unbounded recursions that can be abused by an attacker. | ||||
| CVE-2024-27415 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-26 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: bridge: confirm multicast packets before passing them up the stack conntrack nf_confirm logic cannot handle cloned skbs referencing the same nf_conn entry, which will happen for multicast (broadcast) frames on bridges. Example: macvlan0 | br0 / \ ethX ethY ethX (or Y) receives a L2 multicast or broadcast packet containing an IP packet, flow is not yet in conntrack table. 1. skb passes through bridge and fake-ip (br_netfilter)Prerouting. -> skb->_nfct now references a unconfirmed entry 2. skb is broad/mcast packet. bridge now passes clones out on each bridge interface. 3. skb gets passed up the stack. 4. In macvlan case, macvlan driver retains clone(s) of the mcast skb and schedules a work queue to send them out on the lower devices. The clone skb->_nfct is not a copy, it is the same entry as the original skb. The macvlan rx handler then returns RX_HANDLER_PASS. 5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb. The Macvlan broadcast worker and normal confirm path will race. This race will not happen if step 2 already confirmed a clone. In that case later steps perform skb_clone() with skb->_nfct already confirmed (in hash table). This works fine. But such confirmation won't happen when eb/ip/nftables rules dropped the packets before they reached the nf_confirm step in postrouting. Pablo points out that nf_conntrack_bridge doesn't allow use of stateful nat, so we can safely discard the nf_conn entry and let inet call conntrack again. This doesn't work for bridge netfilter: skb could have a nat transformation. Also bridge nf prevents re-invocation of inet prerouting via 'sabotage_in' hook. Work around this problem by explicit confirmation of the entry at LOCAL_IN time, before upper layer has a chance to clone the unconfirmed entry. The downside is that this disables NAT and conntrack helpers. Alternative fix would be to add locking to all code parts that deal with unconfirmed packets, but even if that could be done in a sane way this opens up other problems, for example: -m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4 -m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5 For multicast case, only one of such conflicting mappings will be created, conntrack only handles 1:1 NAT mappings. Users should set create a setup that explicitly marks such traffic NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass them, ruleset might have accept rules for untracked traffic already, so user-visible behaviour would change. | ||||
| CVE-2023-52791 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: i2c: core: Run atomic i2c xfer when !preemptible Since bae1d3a05a8b, i2c transfers are non-atomic if preemption is disabled. However, non-atomic i2c transfers require preemption (e.g. in wait_for_completion() while waiting for the DMA). panic() calls preempt_disable_notrace() before calling emergency_restart(). Therefore, if an i2c device is used for the restart, the xfer should be atomic. This avoids warnings like: [ 12.667612] WARNING: CPU: 1 PID: 1 at kernel/rcu/tree_plugin.h:318 rcu_note_context_switch+0x33c/0x6b0 [ 12.676926] Voluntary context switch within RCU read-side critical section! ... [ 12.742376] schedule_timeout from wait_for_completion_timeout+0x90/0x114 [ 12.749179] wait_for_completion_timeout from tegra_i2c_wait_completion+0x40/0x70 ... [ 12.994527] atomic_notifier_call_chain from machine_restart+0x34/0x58 [ 13.001050] machine_restart from panic+0x2a8/0x32c Use !preemptible() instead, which is basically the same check as pre-v5.2. | ||||
| CVE-2023-52813 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: pcrypt - Fix hungtask for PADATA_RESET We found a hungtask bug in test_aead_vec_cfg as follows: INFO: task cryptomgr_test:391009 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. Call trace: __switch_to+0x98/0xe0 __schedule+0x6c4/0xf40 schedule+0xd8/0x1b4 schedule_timeout+0x474/0x560 wait_for_common+0x368/0x4e0 wait_for_completion+0x20/0x30 wait_for_completion+0x20/0x30 test_aead_vec_cfg+0xab4/0xd50 test_aead+0x144/0x1f0 alg_test_aead+0xd8/0x1e0 alg_test+0x634/0x890 cryptomgr_test+0x40/0x70 kthread+0x1e0/0x220 ret_from_fork+0x10/0x18 Kernel panic - not syncing: hung_task: blocked tasks For padata_do_parallel, when the return err is 0 or -EBUSY, it will call wait_for_completion(&wait->completion) in test_aead_vec_cfg. In normal case, aead_request_complete() will be called in pcrypt_aead_serial and the return err is 0 for padata_do_parallel. But, when pinst->flags is PADATA_RESET, the return err is -EBUSY for padata_do_parallel, and it won't call aead_request_complete(). Therefore, test_aead_vec_cfg will hung at wait_for_completion(&wait->completion), which will cause hungtask. The problem comes as following: (padata_do_parallel) | rcu_read_lock_bh(); | err = -EINVAL; | (padata_replace) | pinst->flags |= PADATA_RESET; err = -EBUSY | if (pinst->flags & PADATA_RESET) | rcu_read_unlock_bh() | return err In order to resolve the problem, we replace the return err -EBUSY with -EAGAIN, which means parallel_data is changing, and the caller should call it again. v3: remove retry and just change the return err. v2: introduce padata_try_do_parallel() in pcrypt_aead_encrypt and pcrypt_aead_decrypt to solve the hungtask. | ||||
| CVE-2024-56644 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/ipv6: release expired exception dst cached in socket Dst objects get leaked in ip6_negative_advice() when this function is executed for an expired IPv6 route located in the exception table. There are several conditions that must be fulfilled for the leak to occur: * an ICMPv6 packet indicating a change of the MTU for the path is received, resulting in an exception dst being created * a TCP connection that uses the exception dst for routing packets must start timing out so that TCP begins retransmissions * after the exception dst expires, the FIB6 garbage collector must not run before TCP executes ip6_negative_advice() for the expired exception dst When TCP executes ip6_negative_advice() for an exception dst that has expired and if no other socket holds a reference to the exception dst, the refcount of the exception dst is 2, which corresponds to the increment made by dst_init() and the increment made by the TCP socket for which the connection is timing out. The refcount made by the socket is never released. The refcount of the dst is decremented in sk_dst_reset() but that decrement is counteracted by a dst_hold() intentionally placed just before the sk_dst_reset() in ip6_negative_advice(). After ip6_negative_advice() has finished, there is no other object tied to the dst. The socket lost its reference stored in sk_dst_cache and the dst is no longer in the exception table. The exception dst becomes a leaked object. As a result of this dst leak, an unbalanced refcount is reported for the loopback device of a net namespace being destroyed under kernels that do not contain e5f80fcf869a ("ipv6: give an IPv6 dev to blackhole_netdev"): unregister_netdevice: waiting for lo to become free. Usage count = 2 Fix the dst leak by removing the dst_hold() in ip6_negative_advice(). The patch that introduced the dst_hold() in ip6_negative_advice() was 92f1655aa2b22 ("net: fix __dst_negative_advice() race"). But 92f1655aa2b22 merely refactored the code with regards to the dst refcount so the issue was present even before 92f1655aa2b22. The bug was introduced in 54c1a859efd9f ("ipv6: Don't drop cache route entry unless timer actually expired.") where the expired cached route is deleted and the sk_dst_cache member of the socket is set to NULL by calling dst_negative_advice() but the refcount belonging to the socket is left unbalanced. The IPv4 version - ipv4_negative_advice() - is not affected by this bug. When the TCP connection times out ipv4_negative_advice() merely resets the sk_dst_cache of the socket while decrementing the refcount of the exception dst. | ||||
| CVE-2023-52834 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: atl1c: Work around the DMA RX overflow issue This is based on alx driver commit 881d0327db37 ("net: alx: Work around the DMA RX overflow issue"). The alx and atl1c drivers had RX overflow error which was why a custom allocator was created to avoid certain addresses. The simpler workaround then created for alx driver, but not for atl1c due to lack of tester. Instead of using a custom allocator, check the allocated skb address and use skb_reserve() to move away from problematic 0x...fc0 address. Tested on AR8131 on Acer 4540. | ||||
| CVE-2024-35824 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: misc: lis3lv02d_i2c: Fix regulators getting en-/dis-abled twice on suspend/resume When not configured for wakeup lis3lv02d_i2c_suspend() will call lis3lv02d_poweroff() even if the device has already been turned off by the runtime-suspend handler and if configured for wakeup and the device is runtime-suspended at this point then it is not turned back on to serve as a wakeup source. Before commit b1b9f7a49440 ("misc: lis3lv02d_i2c: Add missing setting of the reg_ctrl callback"), lis3lv02d_poweroff() failed to disable the regulators which as a side effect made calling poweroff() twice ok. Now that poweroff() correctly disables the regulators, doing this twice triggers a WARN() in the regulator core: unbalanced disables for regulator-dummy WARNING: CPU: 1 PID: 92 at drivers/regulator/core.c:2999 _regulator_disable ... Fix lis3lv02d_i2c_suspend() to not call poweroff() a second time if already runtime-suspended and add a poweron() call when necessary to make wakeup work. lis3lv02d_i2c_resume() has similar issues, with an added weirness that it always powers on the device if it is runtime suspended, after which the first runtime-resume will call poweron() again, causing the enabled count for the regulator to increase by 1 every suspend/resume. These unbalanced regulator_enable() calls cause the regulator to never be turned off and trigger the following WARN() on driver unbind: WARNING: CPU: 1 PID: 1724 at drivers/regulator/core.c:2396 _regulator_put Fix this by making lis3lv02d_i2c_resume() mirror the new suspend(). | ||||
| CVE-2024-27434 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mvm: don't set the MFP flag for the GTK The firmware doesn't need the MFP flag for the GTK, it can even make the firmware crash. in case the AP is configured with: group cipher TKIP and MFPC. We would send the GTK with cipher = TKIP and MFP which is of course not possible. | ||||
| CVE-2024-35787 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: md/md-bitmap: fix incorrect usage for sb_index Commit d7038f951828 ("md-bitmap: don't use ->index for pages backing the bitmap file") removed page->index from bitmap code, but left wrong code logic for clustered-md. current code never set slot offset for cluster nodes, will sometimes cause crash in clustered env. Call trace (partly): md_bitmap_file_set_bit+0x110/0x1d8 [md_mod] md_bitmap_startwrite+0x13c/0x240 [md_mod] raid1_make_request+0x6b0/0x1c08 [raid1] md_handle_request+0x1dc/0x368 [md_mod] md_submit_bio+0x80/0xf8 [md_mod] __submit_bio+0x178/0x300 submit_bio_noacct_nocheck+0x11c/0x338 submit_bio_noacct+0x134/0x614 submit_bio+0x28/0xdc submit_bh_wbc+0x130/0x1cc submit_bh+0x1c/0x28 | ||||
| CVE-2024-35794 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-09-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-raid: really frozen sync_thread during suspend 1) commit f52f5c71f3d4 ("md: fix stopping sync thread") remove MD_RECOVERY_FROZEN from __md_stop_writes() and doesn't realize that dm-raid relies on __md_stop_writes() to frozen sync_thread indirectly. Fix this problem by adding MD_RECOVERY_FROZEN in md_stop_writes(), and since stop_sync_thread() is only used for dm-raid in this case, also move stop_sync_thread() to md_stop_writes(). 2) The flag MD_RECOVERY_FROZEN doesn't mean that sync thread is frozen, it only prevent new sync_thread to start, and it can't stop the running sync thread; In order to frozen sync_thread, after seting the flag, stop_sync_thread() should be used. 3) The flag MD_RECOVERY_FROZEN doesn't mean that writes are stopped, use it as condition for md_stop_writes() in raid_postsuspend() doesn't look correct. Consider that reentrant stop_sync_thread() do nothing, always call md_stop_writes() in raid_postsuspend(). 4) raid_message can set/clear the flag MD_RECOVERY_FROZEN at anytime, and if MD_RECOVERY_FROZEN is cleared while the array is suspended, new sync_thread can start unexpected. Fix this by disallow raid_message() to change sync_thread status during suspend. Note that after commit f52f5c71f3d4 ("md: fix stopping sync thread"), the test shell/lvconvert-raid-reshape.sh start to hang in stop_sync_thread(), and with previous fixes, the test won't hang there anymore, however, the test will still fail and complain that ext4 is corrupted. And with this patch, the test won't hang due to stop_sync_thread() or fail due to ext4 is corrupted anymore. However, there is still a deadlock related to dm-raid456 that will be fixed in following patches. | ||||