Filtered by vendor Redhat
Subscriptions
Filtered by product Amq Streams
Subscriptions
Total
114 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2023-34455 | 2 Redhat, Xerial | 7 Amq Broker, Amq Streams, Camel K and 4 more | 2025-02-13 | 7.5 High |
| snappy-java is a fast compressor/decompressor for Java. Due to use of an unchecked chunk length, an unrecoverable fatal error can occur in versions prior to 1.1.10.1. The code in the function hasNextChunk in the fileSnappyInputStream.java checks if a given stream has more chunks to read. It does that by attempting to read 4 bytes. If it wasn’t possible to read the 4 bytes, the function returns false. Otherwise, if 4 bytes were available, the code treats them as the length of the next chunk. In the case that the `compressed` variable is null, a byte array is allocated with the size given by the input data. Since the code doesn’t test the legality of the `chunkSize` variable, it is possible to pass a negative number (such as 0xFFFFFFFF which is -1), which will cause the code to raise a `java.lang.NegativeArraySizeException` exception. A worse case would happen when passing a huge positive value (such as 0x7FFFFFFF), which would raise the fatal `java.lang.OutOfMemoryError` error. Version 1.1.10.1 contains a patch for this issue. | ||||
| CVE-2023-26049 | 4 Debian, Eclipse, Netapp and 1 more | 15 Debian Linux, Jetty, Active Iq Unified Manager and 12 more | 2025-02-13 | 2.4 Low |
| Jetty is a java based web server and servlet engine. Nonstandard cookie parsing in Jetty may allow an attacker to smuggle cookies within other cookies, or otherwise perform unintended behavior by tampering with the cookie parsing mechanism. If Jetty sees a cookie VALUE that starts with `"` (double quote), it will continue to read the cookie string until it sees a closing quote -- even if a semicolon is encountered. So, a cookie header such as: `DISPLAY_LANGUAGE="b; JSESSIONID=1337; c=d"` will be parsed as one cookie, with the name DISPLAY_LANGUAGE and a value of b; JSESSIONID=1337; c=d instead of 3 separate cookies. This has security implications because if, say, JSESSIONID is an HttpOnly cookie, and the DISPLAY_LANGUAGE cookie value is rendered on the page, an attacker can smuggle the JSESSIONID cookie into the DISPLAY_LANGUAGE cookie and thereby exfiltrate it. This is significant when an intermediary is enacting some policy based on cookies, so a smuggled cookie can bypass that policy yet still be seen by the Jetty server or its logging system. This issue has been addressed in versions 9.4.51, 10.0.14, 11.0.14, and 12.0.0.beta0 and users are advised to upgrade. There are no known workarounds for this issue. | ||||
| CVE-2023-26048 | 2 Eclipse, Redhat | 8 Jetty, Amq Streams, Camel Spring Boot and 5 more | 2025-02-13 | 5.3 Medium |
| Jetty is a java based web server and servlet engine. In affected versions servlets with multipart support (e.g. annotated with `@MultipartConfig`) that call `HttpServletRequest.getParameter()` or `HttpServletRequest.getParts()` may cause `OutOfMemoryError` when the client sends a multipart request with a part that has a name but no filename and very large content. This happens even with the default settings of `fileSizeThreshold=0` which should stream the whole part content to disk. An attacker client may send a large multipart request and cause the server to throw `OutOfMemoryError`. However, the server may be able to recover after the `OutOfMemoryError` and continue its service -- although it may take some time. This issue has been patched in versions 9.4.51, 10.0.14, and 11.0.14. Users are advised to upgrade. Users unable to upgrade may set the multipart parameter `maxRequestSize` which must be set to a non-negative value, so the whole multipart content is limited (although still read into memory). | ||||
| CVE-2024-47554 | 1 Redhat | 1 Amq Streams | 2025-01-31 | 4.3 Medium |
| Uncontrolled Resource Consumption vulnerability in Apache Commons IO. The org.apache.commons.io.input.XmlStreamReader class may excessively consume CPU resources when processing maliciously crafted input. This issue affects Apache Commons IO: from 2.0 before 2.14.0. Users are recommended to upgrade to version 2.14.0 or later, which fixes the issue. | ||||
| CVE-2024-31141 | 1 Redhat | 2 Amq Streams, Apache Camel Spring Boot | 2025-01-31 | 6.5 Medium |
| Files or Directories Accessible to External Parties, Improper Privilege Management vulnerability in Apache Kafka Clients. Apache Kafka Clients accept configuration data for customizing behavior, and includes ConfigProvider plugins in order to manipulate these configurations. Apache Kafka also provides FileConfigProvider, DirectoryConfigProvider, and EnvVarConfigProvider implementations which include the ability to read from disk or environment variables. In applications where Apache Kafka Clients configurations can be specified by an untrusted party, attackers may use these ConfigProviders to read arbitrary contents of the disk and environment variables. In particular, this flaw may be used in Apache Kafka Connect to escalate from REST API access to filesystem/environment access, which may be undesirable in certain environments, including SaaS products. This issue affects Apache Kafka Clients: from 2.3.0 through 3.5.2, 3.6.2, 3.7.0. Users with affected applications are recommended to upgrade kafka-clients to version >=3.8.0, and set the JVM system property "org.apache.kafka.automatic.config.providers=none". Users of Kafka Connect with one of the listed ConfigProvider implementations specified in their worker config are also recommended to add appropriate "allowlist.pattern" and "allowed.paths" to restrict their operation to appropriate bounds. For users of Kafka Clients or Kafka Connect in environments that trust users with disk and environment variable access, it is not recommended to set the system property. For users of the Kafka Broker, Kafka MirrorMaker 2.0, Kafka Streams, and Kafka command-line tools, it is not recommended to set the system property. | ||||
| CVE-2024-8285 | 1 Redhat | 2 Amq Streams, Kroxylicious | 2024-12-30 | 5.9 Medium |
| A flaw was found in Kroxylicious. When establishing the connection with the upstream Kafka server using a TLS secured connection, Kroxylicious fails to properly verify the server's hostname, resulting in an insecure connection. For a successful attack to be performed, the attacker needs to perform a Man-in-the-Middle attack or compromise any external systems, such as DNS or network routing configuration. This issue is considered a high complexity attack, with additional high privileges required, as the attack would need access to the Kroxylicious configuration or a peer system. The result of a successful attack impacts both data integrity and confidentiality. | ||||
| CVE-2023-34454 | 2 Redhat, Xerial | 3 Amq Streams, Quarkus, Snappy-java | 2024-12-12 | 5.9 Medium |
| snappy-java is a fast compressor/decompressor for Java. Due to unchecked multiplications, an integer overflow may occur in versions prior to 1.1.10.1, causing an unrecoverable fatal error. The function `compress(char[] input)` in the file `Snappy.java` receives an array of characters and compresses it. It does so by multiplying the length by 2 and passing it to the rawCompress` function. Since the length is not tested, the multiplication by two can cause an integer overflow and become negative. The rawCompress function then uses the received length and passes it to the natively compiled maxCompressedLength function, using the returned value to allocate a byte array. Since the maxCompressedLength function treats the length as an unsigned integer, it doesn’t care that it is negative, and it returns a valid value, which is casted to a signed integer by the Java engine. If the result is negative, a `java.lang.NegativeArraySizeException` exception will be raised while trying to allocate the array `buf`. On the other side, if the result is positive, the `buf` array will successfully be allocated, but its size might be too small to use for the compression, causing a fatal Access Violation error. The same issue exists also when using the `compress` functions that receive double, float, int, long and short, each using a different multiplier that may cause the same issue. The issue most likely won’t occur when using a byte array, since creating a byte array of size 0x80000000 (or any other negative value) is impossible in the first place. Version 1.1.10.1 contains a patch for this issue. | ||||
| CVE-2023-34453 | 2 Redhat, Xerial | 3 Amq Streams, Quarkus, Snappy-java | 2024-12-12 | 5.9 Medium |
| snappy-java is a fast compressor/decompressor for Java. Due to unchecked multiplications, an integer overflow may occur in versions prior to 1.1.10.1, causing a fatal error. The function `shuffle(int[] input)` in the file `BitShuffle.java` receives an array of integers and applies a bit shuffle on it. It does so by multiplying the length by 4 and passing it to the natively compiled shuffle function. Since the length is not tested, the multiplication by four can cause an integer overflow and become a smaller value than the true size, or even zero or negative. In the case of a negative value, a `java.lang.NegativeArraySizeException` exception will raise, which can crash the program. In a case of a value that is zero or too small, the code that afterwards references the shuffled array will assume a bigger size of the array, which might cause exceptions such as `java.lang.ArrayIndexOutOfBoundsException`. The same issue exists also when using the `shuffle` functions that receive a double, float, long and short, each using a different multiplier that may cause the same issue. Version 1.1.10.1 contains a patch for this vulnerability. | ||||
| CVE-2023-33201 | 2 Bouncycastle, Redhat | 10 Bc-java, Amq Broker, Amq Streams and 7 more | 2024-12-04 | 5.3 Medium |
| Bouncy Castle For Java before 1.74 is affected by an LDAP injection vulnerability. The vulnerability only affects applications that use an LDAP CertStore from Bouncy Castle to validate X.509 certificates. During the certificate validation process, Bouncy Castle inserts the certificate's Subject Name into an LDAP search filter without any escaping, which leads to an LDAP injection vulnerability. | ||||
| CVE-2024-24791 | 2 Go Standard Library, Redhat | 19 Net\/http, Amq Streams, Container Native Virtualization and 16 more | 2024-11-21 | 7.5 High |
| The net/http HTTP/1.1 client mishandled the case where a server responds to a request with an "Expect: 100-continue" header with a non-informational (200 or higher) status. This mishandling could leave a client connection in an invalid state, where the next request sent on the connection will fail. An attacker sending a request to a net/http/httputil.ReverseProxy proxy can exploit this mishandling to cause a denial of service by sending "Expect: 100-continue" requests which elicit a non-informational response from the backend. Each such request leaves the proxy with an invalid connection, and causes one subsequent request using that connection to fail. | ||||
| CVE-2023-52428 | 2 Connect2id, Redhat | 4 Nimbus Jose\+jwt, Amq Streams, Apache Camel Spring Boot and 1 more | 2024-11-21 | 7.5 High |
| In Connect2id Nimbus JOSE+JWT before 9.37.2, an attacker can cause a denial of service (resource consumption) via a large JWE p2c header value (aka iteration count) for the PasswordBasedDecrypter (PBKDF2) component. | ||||
| CVE-2023-51074 | 2 Json-path, Redhat | 5 Jayway Jsonpath, Amq Streams, Apache-camel-spring-boot and 2 more | 2024-11-21 | 5.3 Medium |
| json-path v2.8.0 was discovered to contain a stack overflow via the Criteria.parse() method. | ||||
| CVE-2023-43642 | 2 Redhat, Xerial | 3 Amq Streams, Quarkus, Snappy-java | 2024-11-21 | 7.5 High |
| snappy-java is a Java port of the snappy, a fast C++ compresser/decompresser developed by Google. The SnappyInputStream was found to be vulnerable to Denial of Service (DoS) attacks when decompressing data with a too large chunk size. Due to missing upper bound check on chunk length, an unrecoverable fatal error can occur. All versions of snappy-java including the latest released version 1.1.10.3 are vulnerable to this issue. A fix has been introduced in commit `9f8c3cf74` which will be included in the 1.1.10.4 release. Users are advised to upgrade. Users unable to upgrade should only accept compressed data from trusted sources. | ||||
| CVE-2023-3635 | 2 Redhat, Squareup | 6 Amq Streams, Jboss Enterprise Bpms Platform, Jboss Fuse and 3 more | 2024-11-21 | 5.9 Medium |
| GzipSource does not handle an exception that might be raised when parsing a malformed gzip buffer. This may lead to denial of service of the Okio client when handling a crafted GZIP archive, by using the GzipSource class. | ||||
| CVE-2023-3089 | 1 Redhat | 18 Acm, Amq Streams, Container Native Virtualization and 15 more | 2024-11-21 | 7 High |
| A compliance problem was found in the Red Hat OpenShift Container Platform. Red Hat discovered that, when FIPS mode was enabled, not all of the cryptographic modules in use were FIPS-validated. | ||||
| CVE-2023-31582 | 2 Jose4j Project, Redhat | 4 Jose4j, Amq Streams, Jboss Data Grid and 1 more | 2024-11-21 | 7.5 High |
| jose4j before v0.9.3 allows attackers to set a low iteration count of 1000 or less. | ||||
| CVE-2023-0833 | 2 Redhat, Squareup | 3 A-mq Streams, Amq Streams, Okhttp | 2024-11-21 | 4.7 Medium |
| A flaw was found in Red Hat's AMQ-Streams, which ships a version of the OKHttp component with an information disclosure flaw via an exception triggered by a header containing an illegal value. This issue could allow an authenticated attacker to access information outside of their regular permissions. | ||||
| CVE-2022-42920 | 3 Apache, Fedoraproject, Redhat | 10 Commons Bcel, Fedora, Amq Streams and 7 more | 2024-11-21 | 9.8 Critical |
| Apache Commons BCEL has a number of APIs that would normally only allow changing specific class characteristics. However, due to an out-of-bounds writing issue, these APIs can be used to produce arbitrary bytecode. This could be abused in applications that pass attacker-controllable data to those APIs, giving the attacker more control over the resulting bytecode than otherwise expected. Update to Apache Commons BCEL 6.6.0. | ||||
| CVE-2022-42889 | 4 Apache, Juniper, Netapp and 1 more | 21 Commons Text, Jsa1500, Jsa3500 and 18 more | 2024-11-21 | 9.8 Critical |
| Apache Commons Text performs variable interpolation, allowing properties to be dynamically evaluated and expanded. The standard format for interpolation is "${prefix:name}", where "prefix" is used to locate an instance of org.apache.commons.text.lookup.StringLookup that performs the interpolation. Starting with version 1.5 and continuing through 1.9, the set of default Lookup instances included interpolators that could result in arbitrary code execution or contact with remote servers. These lookups are: - "script" - execute expressions using the JVM script execution engine (javax.script) - "dns" - resolve dns records - "url" - load values from urls, including from remote servers Applications using the interpolation defaults in the affected versions may be vulnerable to remote code execution or unintentional contact with remote servers if untrusted configuration values are used. Users are recommended to upgrade to Apache Commons Text 1.10.0, which disables the problematic interpolators by default. | ||||
| CVE-2022-42004 | 5 Debian, Fasterxml, Netapp and 2 more | 20 Debian Linux, Jackson-databind, Oncommand Workflow Automation and 17 more | 2024-11-21 | 7.5 High |
| In FasterXML jackson-databind before 2.13.4, resource exhaustion can occur because of a lack of a check in BeanDeserializer._deserializeFromArray to prevent use of deeply nested arrays. An application is vulnerable only with certain customized choices for deserialization. | ||||