Total
2938 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-20306 | 1 Cisco | 2 Firepower Management Center, Secure Firewall Management Center | 2025-08-25 | 4.9 Medium |
| A vulnerability in the web-based management interface of Cisco Secure Firewall Management Center (FMC) Software could allow an authenticated, remote attacker with Administrator-level privileges to execute arbitrary commands on the underlying operating system. This vulnerability is due to insufficient input validation of certain HTTP request parameters that are sent to the web-based management interface. An attacker could exploit this vulnerability by authenticating to the interface and sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to execute commands as the root user on the affected device. To exploit this vulnerability, an attacker would need Administrator-level credentials. | ||||
| CVE-2025-4357 | 1 Tenda | 2 Rx3, Rx3 Firmware | 2025-08-25 | 4.7 Medium |
| A vulnerability was found in Tenda RX3 16.03.13.11_multi. It has been rated as critical. This issue affects some unknown processing of the file /goform/telnet. The manipulation leads to command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2025-54131 | 2 Anysphere, Cursor | 2 Cursor, Cursor | 2025-08-25 | 6.4 Medium |
| Cursor is a code editor built for programming with AI. In versions below 1.3, an attacker can bypass the allow list in auto-run mode with a backtick (`) or $(cmd). If a user has swapped Cursor from its default settings (requiring approval for every terminal call) to an allowlist, an attacker can execute arbitrary command execution outside of the allowlist without user approval. An attacker can trigger this vulnerability if chained with indirect prompt injection. This is fixed in version 1.3. | ||||
| CVE-2025-41451 | 1 Danfoss | 1 Ak-sm8xxa Series | 2025-08-23 | N/A |
| Improper neutralization of alarm-to-mail configuration fields used in an OS shell Command ('Command Injection') in Danfoss AK-SM8xxA Series prior to version 4.3.1, leading to a potential post-authenticated remote code execution on an attacked system. | ||||
| CVE-2025-48978 | 1 Ui | 1 Edgeswitch | 2025-08-23 | 7.5 High |
| An Improper Input Validation in EdgeMAX EdgeSwitch (Version 1.11.0 and earlier) could allow a Command Injection by a malicious actor with access to EdgeSwitch adjacent network. Affected Products: EdgeMAX EdgeSwitch (Version 1.11.0 and earlier) Mitigation: Update the EdgeMAX EdgeSwitch to Version 1.11.1 or later. | ||||
| CVE-2025-24285 | 2025-08-22 | 9.8 Critical | ||
| Multiple Improper Input Validation vulnerabilities in UniFi Connect EV Station Lite may allow a Command Injection by a malicious actor with network access to the UniFi Connect EV Station Lite. Affected Products: UniFi Connect EV Station Lite (Version 1.5.1 and earlier) Mitigation: Update UniFi Connect EV Station Lite to Version 1.5.2 or later | ||||
| CVE-2025-55283 | 1 Aiven | 2 Aiven, Aiven-db-migrate | 2025-08-21 | 9.1 Critical |
| aiven-db-migrate is an Aiven database migration tool. Prior to 1.0.7, there is a privilege escalation vulnerability that allows elevation to superuser inside PostgreSQL databases during a migration from an untrusted source server. The vulnerability stems from psql executing commands embedded in a dump from the source server. This vulnerability is fixed in 1.0.7. | ||||
| CVE-2024-37186 | 1 Wavlink | 2 Wl-wn533a8, Wl-wn533a8 Firmware | 2025-08-21 | 9.1 Critical |
| An os command injection vulnerability exists in the adm.cgi set_ledonoff() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2024-34166 | 1 Wavlink | 2 Wl-wn533a8, Wl-wn533a8 Firmware | 2025-08-21 | 10 Critical |
| An os command injection vulnerability exists in the touchlist_sync.cgi touchlistsync() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted set of HTTP requests can lead to arbitrary code execution. An attacker can send an HTTP request to trigger this vulnerability. | ||||
| CVE-2024-39360 | 1 Wavlink | 2 Wl-wn533a8, Wl-wn533a8 Firmware | 2025-08-21 | 9.1 Critical |
| An os command injection vulnerability exists in the nas.cgi remove_dir() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2024-39367 | 1 Wavlink | 2 Wl-wn533a8, Wl-wn533a8 Firmware | 2025-08-21 | 9.1 Critical |
| An os command injection vulnerability exists in the firewall.cgi iptablesWebsFilterRun() functionality of Wavlink AC3000 M33A8.V5030.210505. A specially crafted HTTP request can lead to arbitrary code execution. An attacker can make an authenticated HTTP request to trigger this vulnerability. | ||||
| CVE-2025-9090 | 1 Tenda | 2 Ac20, Ac20 Firmware | 2025-08-21 | 6.3 Medium |
| A vulnerability was identified in Tenda AC20 16.03.08.12. Affected is the function websFormDefine of the file /goform/telnet of the component Telnet Service. The manipulation leads to command injection. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2024-2642 | 1 Ruijie | 2 Rg-nbs2009g-p, Rg-nbs2009g-p Firmware | 2025-08-21 | 7.3 High |
| A vulnerability was found in Ruijie RG-NBS2009G-P up to 20240305. It has been declared as critical. Affected by this vulnerability is an unknown functionality of the file /EXCU_SHELL. The manipulation of the argument Command1 leads to command injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-257281 was assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-57733 | 1 Jetbrains | 1 Teamcity | 2025-08-21 | 5.5 Medium |
| In JetBrains TeamCity before 2025.07.1 sMTP injection was possible allowing modification of email content | ||||
| CVE-2025-55591 | 1 Totolink | 2 A3002r, A3002r Firmware | 2025-08-21 | 9.8 Critical |
| TOTOLINK-A3002R v4.0.0-B20230531.1404 was discovered to contain a command injection vulnerability in the devicemac parameter in the formMapDel endpoint. | ||||
| CVE-2025-55590 | 1 Totolink | 2 A3002r, A3002r Firmware | 2025-08-21 | 6.5 Medium |
| TOTOLINK A3002R v4.0.0-B20230531.1404 was discovered to contain an command injection vulnerability via the component bupload.html. | ||||
| CVE-2024-6269 | 1 Ruijie | 2 Rg-uac, Rg-uac Firmware | 2025-08-21 | 4.7 Medium |
| A vulnerability has been found in Ruijie RG-UAC 1.0 and classified as critical. This vulnerability affects the function get_ip.addr_details of the file /view/vpn/autovpn/sxh_vpnlic.php of the component HTTP POST Request Handler. The manipulation of the argument indevice leads to command injection. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. VDB-269482 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-55294 | 2025-08-20 | 9.8 Critical | ||
| screenshot-desktop allows capturing a screenshot of your local machine. This vulnerability is a command injection issue. When user-controlled input is passed into the format option of the screenshot function, it is interpolated into a shell command without sanitization. This results in arbitrary command execution with the privileges of the calling process. This vulnerability is fixed in 1.15.2. | ||||
| CVE-2025-52337 | 2025-08-20 | 6.5 Medium | ||
| An authenticated arbitrary file upload vulnerability in the Content Explorer feature of LogicData eCommerce Framework v5.0.9.7000 allows attackers to execute arbitrary code via uploading a crafted file. | ||||
| CVE-2025-50461 | 2025-08-20 | 6.5 Medium | ||
| A deserialization vulnerability exists in Volcengine's verl 3.0.0, specifically in the scripts/model_merger.py script when using the "fsdp" backend. The script calls torch.load() with weights_only=False on user-supplied .pt files, allowing attackers to execute arbitrary code if a maliciously crafted model file is loaded. An attacker can exploit this by convincing a victim to download and place a malicious model file in a local directory with a specific filename pattern. This vulnerability may lead to arbitrary code execution with the privileges of the user running the script. | ||||