Filtered by vendor Juniper
Subscriptions
Filtered by product Junos
Subscriptions
Total
653 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2017-2304 | 1 Juniper | 7 Ex4300, Ex4600, Junos and 4 more | 2025-04-20 | N/A |
| Juniper Networks QFX3500, QFX3600, QFX5100, QFX5200, EX4300 and EX4600 devices running Junos OS 14.1X53 prior to 14.1X53-D40, 15.1X53 prior to 15.1X53-D40, 15.1 prior to 15.1R2, do not pad Ethernet packets with zeros, and thus some packets can contain fragments of system memory or data from previous packets. This issue is also known as 'Etherleak' | ||||
| CVE-2017-2303 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| On Juniper Networks products or platforms running Junos OS 12.1X46 prior to 12.1X46-D50, 12.1X47 prior to 12.1X47-D40, 12.3 prior to 12.3R13, 12.3X48 prior to 12.3X48-D30, 13.2X51 prior to 13.2X51-D40, 13.3 prior to 13.3R10, 14.1 prior to 14.1R8, 14.1X53 prior to 14.1X53-D35, 14.1X55 prior to 14.1X55-D35, 14.2 prior to 14.2R5, 15.1 prior to 15.1F6 or 15.1R3, 15.1X49 prior to 15.1X49-D30 or 15.1X49-D40, 15.1X53 prior to 15.1X53-D35, and where RIP is enabled, certain RIP advertisements received by the router may cause the RPD daemon to crash resulting in a denial of service condition. | ||||
| CVE-2017-2340 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| On Juniper Networks Junos OS 15.1 releases from 15.1R3 to 15.1R4, 16.1 prior to 16.1R3, on M/MX platforms where Enhanced Subscriber Management for DHCPv6 subscribers is configured, a vulnerability in processing IPv6 ND packets originating from subscribers and destined to M/MX series routers can result in a PFE (Packet Forwarding Engine) hang or crash. | ||||
| CVE-2017-2342 | 1 Juniper | 2 Junos, Srx300 | 2025-04-20 | N/A |
| MACsec feature on Juniper Networks Junos OS 15.1X49 prior to 15.1X49-D100 on SRX300 series does not report errors when a secure link can not be established. It falls back to an unencrypted link. This can happen when MACsec is configured on ports that are not capable of MACsec or when a secure link can not be established. This can mislead customers into believing that a link is secure. On SRX 300 series devices, prior to 15.1X49-D100, MACsec was only supported on control and fabric ports of SRX340 and SRX345 devices. SRX300 and and SRX320 did not have any MACsec capable ports. Configuring MACsec on ports that were not MACsec capable would have resulted in this issue. Affected releases are Juniper Networks Junos OS 15.1X49 prior to 15.1X49-D100 on SRX300 series. | ||||
| CVE-2017-2345 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| On Junos OS devices with SNMP enabled, a network based attacker with unfiltered access to the RE can cause the Junos OS snmpd daemon to crash and restart by sending a crafted SNMP packet. Repeated crashes of the snmpd daemon can result in a partial denial of service condition. Additionally, it may be possible to craft a malicious SNMP packet in a way that can result in remote code execution. SNMP is disabled in Junos OS by default. Junos OS devices with SNMP disabled are not affected by this issue. No other Juniper Networks products or platforms are affected by this issue. NOTE: This is a different issue than Cisco CVE-2017-6736, CVE-2017-6737, and CVE-2017-6738. Affected releases are Juniper Networks Junos OS 12.1X46 prior to 12.1X46-D67; 12.3X48 prior to 12.3X48-D51, 12.3X48-D55; 13.3 prior to 13.3R10-S2; 14.1 prior to 14.1R2-S10, 14.1R8-S4, 14.1R9; 14.1X50 prior to 14.1X50-D185; 14.1X53 prior to 14.1X53-D122, 14.1X53-D44, 14.1X53-D50; 14.2 prior to 14.2R4-S9, 14.2R7-S7, 14.2R8; 15.1 prior to 15.1F2-S18, 15.1F6-S7, 15.1R4-S8, 15.1R5-S5, 15.1R6-S1, 15.1R7; 15.1X49 prior to 15.1X49-D100, 15.1X49-D110; 15.1X53 prior to 15.1X53-D231, 15.1X53-D47, 15.1X53-D48, 15.1X53-D57, 15.1X53-D64, 15.1X53-D70; 16.1 prior to 16.1R3-S4, 16.1R4-S3, 16.1R4-S4, 16.1R5; 16.2 prior to 16.2R2, 16.2R3; 17.1 prior to 17.1R1-S3, 17.1R2, 17.1R3; 17.2 prior to 17.2R1-S1, 17.2R2; 17.2X75 prior to 17.2X75-D30. Junos releases prior to 10.2 are not affected. | ||||
| CVE-2017-2346 | 1 Juniper | 2 Junos, Mx | 2025-04-20 | N/A |
| An MS-MPC or MS-MIC Service PIC may crash when large fragmented packets are passed through an Application Layer Gateway (ALG). Repeated crashes of the Service PC can result in an extended denial of service condition. The issue can be seen only if NAT or stateful-firewall rules are configured with ALGs enabled. This issue was caused by the code change for PR 1182910 in Junos OS 14.1X55-D30, 14.1X55-D35, 14.2R7, 15.1R5, and 16.1R2. No other versions of Junos OS and no other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS on MX platforms running: 14.1X55 from 14.1X55-D30 to releases prior to 14.1X55-D35; 14.2R from 14.2R7 to releases prior to 14.2R7-S4, 14.2R8; 15.1R from 15.1R5 to releases prior to 15.1R5-S2, 15.1R6; 16.1R from 16.1R2 to releases prior to 16.1R3-S2, 16.1R4. | ||||
| CVE-2016-7103 | 7 Debian, Fedoraproject, Jqueryui and 4 more | 13 Debian Linux, Fedora, Jquery Ui and 10 more | 2025-04-20 | 6.1 Medium |
| Cross-site scripting (XSS) vulnerability in jQuery UI before 1.12.0 might allow remote attackers to inject arbitrary web script or HTML via the closeText parameter of the dialog function. | ||||
| CVE-2017-10601 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2. | ||||
| CVE-2017-10607 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| Juniper Networks Junos OS 16.1R1, and services releases based off of 16.1R1, are vulnerable to the receipt of a crafted BGP Protocol Data Unit (PDU) sent directly to the router, which can cause the RPD routing process to crash and restart. Unlike BGP UPDATEs, which are transitive in nature, this issue can only be triggered by a packet sent directly to the IP address of the router. Repeated crashes of the rpd daemon can result in an extended denial of service condition. This issue only affects devices running Junos OS 16.1R1 and services releases based off of 16.1R1 (e.g. 16.1R1-S1, 16.1R1-S2, 16.1R1-S3). No prior versions of Junos OS are affected by this vulnerability, and this issue was resolved in Junos OS 16.2 prior to 16.2R1. No other Juniper Networks products or platforms are affected by this issue. This issue was found during internal product security testing. | ||||
| CVE-2017-10610 | 1 Juniper | 2 Junos, Srx Series | 2025-04-20 | N/A |
| On SRX Series devices, a crafted ICMP packet embedded within a NAT64 IPv6 to IPv4 tunnel may cause the flowd process to crash. Repeated crashes of the flowd process constitutes an extended denial of service condition for the SRX Series device. This issue only occurs if NAT64 is configured. Affected releases are Juniper Networks Junos OS 12.1X46 prior to 12.1X46-D71, 12.3X48 prior to 12.3X48-D55, 15.1X49 prior to 15.1X49-D100 on SRX Series. No other Juniper Networks products or platforms are affected by this issue. | ||||
| CVE-2017-2315 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| On Juniper Networks EX Series Ethernet Switches running affected Junos OS versions, a vulnerability in IPv6 processing has been discovered that may allow a specially crafted IPv6 Neighbor Discovery (ND) packet destined to an EX Series Ethernet Switch to cause a slow memory leak. A malicious network-based packet flood of these crafted IPv6 NDP packets may eventually lead to resource exhaustion and a denial of service. The affected Junos OS versions are: 12.3 prior to 12.3R12-S4, 12.3R13; 13.3 prior to 13.3R10; 14.1 prior to 14.1R8-S3, 14.1R9; 14.1X53 prior ro 14.1X53-D12, 14.1X53-D40; 14.1X55 prior to 14.1X55-D35; 14.2 prior to 14.2R6-S4, 14.2R7-S6, 14.2R8; 15.1 prior to 15.1R5; 16.1 before 16.1R3; 16.2 before 16.2R1-S3, 16.2R2. 17.1R1 and all subsequent releases have a resolution for this vulnerability. | ||||
| CVE-2017-2301 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| On Juniper Networks products or platforms running Junos OS 11.4 prior to 11.4R13-S3, 12.1X46 prior to 12.1X46-D60, 12.3 prior to 12.3R12-S2 or 12.3R13, 12.3X48 prior to 12.3X48-D40, 13.2X51 prior to 13.2X51-D40, 13.3 prior to 13.3R10, 14.1 prior to 14.1R8, 14.1X53 prior to 14.1X53-D12 or 14.1X53-D35, 14.1X55 prior to 14.1X55-D35, 14.2 prior to 14.2R7, 15.1 prior to 15.1F6 or 15.1R3, 15.1X49 prior to 15.1X49-D60, 15.1X53 prior to 15.1X53-D30 and DHCPv6 enabled, when a crafted DHCPv6 packet is received from a subscriber, jdhcpd daemon crashes and restarts. Repeated crashes of the jdhcpd process may constitute an extended denial of service condition for subscribers attempting to obtain IPv6 addresses. | ||||
| CVE-2016-1261 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| J-Web does not validate certain input that may lead to cross-site request forgery (CSRF) issues or cause a denial of J-Web service (DoS). | ||||
| CVE-2016-4921 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| By flooding a Juniper Networks router running Junos OS with specially crafted IPv6 traffic, all available resources can be consumed, leading to the inability to store next hop information for legitimate traffic. In extreme cases, the crafted IPv6 traffic may result in a total resource exhaustion and kernel panic. The issue is triggered by traffic destined to the router. Transit traffic does not trigger the vulnerability. This issue only affects devices with IPv6 enabled and configured. Devices not configured to process IPv6 traffic are unaffected by this vulnerability. This issue was found during internal product security testing. Juniper SIRT is not aware of any malicious exploitation of this vulnerability. Affected releases are Juniper Networks Junos OS 11.4 prior to 11.4R13-S3; 12.3 prior to 12.3R3-S4; 12.3X48 prior to 12.3X48-D30; 13.3 prior to 13.3R10, 13.3R4-S11; 14.1 prior to 14.1R2-S8, 14.1R4-S12, 14.1R8; 14.1X53 prior to 14.1X53-D28, 14.1X53-D40; 14.1X55 prior to 14.1X55-D35; 14.2 prior to 14.2R3-S10, 14.2R4-S7, 14.2R6; 15.1 prior to 15.1F2-S5, 15.1F5-S2, 15.1F6, 15.1R3; 15.1X49 prior to 15.1X49-D40; 15.1X53 prior to 15.1X53-D57, 15.1X53-D70. | ||||
| CVE-2017-10602 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| A buffer overflow vulnerability in Junos OS CLI may allow a local authenticated user with read only privileges and access to Junos CLI, to execute code with root privileges. Affected releases are Juniper Networks Junos OS: 14.1X53 versions prior to 14.1X53-D46 on EX2200/VC, EX3200, EX3300/VC, EX4200, EX4300, EX4550/VC, EX4600, EX6200, EX8200/VC (XRE), QFX3500, QFX3600, QFX5100; 14.1X53 versions prior to 14.1X53-D130 on QFabric System; 14.2 versions prior to 14.2R4-S9, 14.2R6; 15.1 versions prior to 15.1F5, 15.1R3; 15.1X49 versions prior to 15.1X49-D40 on SRX Series; 15.1X53 versions prior to 15.1X53-D47 on NFX150, NFX250; 15.1X53 versions prior to 15.1X53-D65 on QFX10000 Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5110, QFX5200. | ||||
| CVE-2016-4924 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| An incorrect permissions vulnerability in Juniper Networks Junos OS on vMX may allow local unprivileged users on a host system read access to vMX or vPFE images and obtain sensitive information contained in them such as private cryptographic keys. This issue was found during internal product security testing. Juniper SIRT is not aware of any malicious exploitation of this vulnerability. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 15.1 prior to 15.1F5; 14.1 prior to 14.1R8 | ||||
| CVE-2017-10603 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| An XML injection vulnerability in Junos OS CLI can allow a locally authenticated user to elevate privileges and run arbitrary commands as the root user. This issue was found during internal product security testing. Affected releases are Juniper Networks Junos OS 15.1X53 prior to 15.1X53-D47, 15.1 prior to 15.1R3. Junos versions prior to 15.1 are not affected. No other Juniper Networks products or platforms are affected by this issue. | ||||
| CVE-2017-10605 | 1 Juniper | 14 Junos, Srx100, Srx110 and 11 more | 2025-04-20 | N/A |
| On all vSRX and SRX Series devices, when the DHCP or DHCP relay is configured, specially crafted packet might cause the flowd process to crash, halting or interrupting traffic from flowing through the device(s). Repeated crashes of the flowd process may constitute an extended denial of service condition for the device(s). If the device is configured in high-availability, the RG1+ (data-plane) will fail-over to the secondary node. If the device is configured in stand-alone, there will be temporary traffic interruption until the flowd process is restored automatically. Sustained crafted packets may cause the secondary failover node to fail back, or fail completely, potentially halting flowd on both nodes of the cluster or causing flip-flop failovers to occur. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.1X46 prior to 12.1X46-D67 on vSRX or SRX Series; 12.3X48 prior to 12.3X48-D50 on vSRX or SRX Series; 15.1X49 prior to 15.1X49-D91, 15.1X49-D100 on vSRX or SRX Series. | ||||
| CVE-2017-10619 | 1 Juniper | 7 Junos, Srx1400, Srx3400 and 4 more | 2025-04-20 | N/A |
| When Express Path (formerly known as service offloading) is configured on Juniper Networks SRX1400, SRX3400, SRX3600, SRX5400, SRX5600, SRX5800 in high availability cluster configuration mode, certain multicast packets might cause the flowd process to crash, halting or interrupting traffic from flowing through the device and triggering RG1+ (data-plane) fail-over to the secondary node. Repeated crashes of the flowd process may constitute an extended denial of service condition. This service is not enabled by default and is only supported in high-end SRX platforms. Affected releases are Juniper Networks Junos OS 12.3X48 prior to 12.3X48-D45, 15.1X49 prior to 15.1X49-D80 on SRX1400, SRX3400, SRX3600, SRX5400, SRX5600, SRX5800. | ||||
| CVE-2017-2312 | 1 Juniper | 1 Junos | 2025-04-20 | N/A |
| On Juniper Networks devices running Junos OS affected versions and with LDP enabled, a specific LDP packet destined to the RE (Routing Engine) will consume a small amount of the memory allocated for the rpd (routing protocol daemon) process. Over time, repeatedly receiving this type of LDP packet(s) will cause the memory to exhaust and the rpd process to crash and restart. It is not possible to free up the memory that has been consumed without restarting the rpd process. This issue affects Junos OS based devices with either IPv4 or IPv6 LDP enabled via the [protocols ldp] configuration (the native IPv6 support for LDP is available in Junos OS 16.1 and higher). The interface on which the packet arrives needs to have LDP enabled. The affected Junos versions are: 13.3 prior to 13.3R10; 14.1 prior to 14.1R8; 14.2 prior to 14.2R7-S6 or 14.2R8; 15.1 prior to 15.1F2-S14, 15.1F6-S4, 15.1F7, 15.1R4-S7, 15.1R5; 15.1X49 before 15.1X49-D70; 15.1X53 before 15.1X53-D230, 15.1X53-D63, 15.1X53-D70; 16.1 before 16.1R2. 16.2R1 and all subsequent releases have a resolution for this vulnerability. | ||||