Filtered by vendor Redhat
Subscriptions
Filtered by product Build Keycloak
Subscriptions
Total
59 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-7885 | 1 Redhat | 20 Apache Camel Hawtio, Apache Camel Spring Boot, Build Keycloak and 17 more | 2025-07-10 | 7.5 High |
| A vulnerability was found in Undertow where the ProxyProtocolReadListener reuses the same StringBuilder instance across multiple requests. This issue occurs when the parseProxyProtocolV1 method processes multiple requests on the same HTTP connection. As a result, different requests may share the same StringBuilder instance, potentially leading to information leakage between requests or responses. In some cases, a value from a previous request or response may be erroneously reused, which could lead to unintended data exposure. This issue primarily results in errors and connection termination but creates a risk of data leakage in multi-request environments. | ||||
| CVE-2023-5685 | 1 Redhat | 12 Apache-camel-spring-boot, Apache Camel Hawtio, Build Keycloak and 9 more | 2025-07-10 | 7.5 High |
| A flaw was found in XNIO. The XNIO NotifierState that can cause a Stack Overflow Exception when the chain of notifier states becomes problematically large can lead to uncontrolled resource management and a possible denial of service (DoS). | ||||
| CVE-2024-1249 | 1 Redhat | 15 Amq Broker, Amq Streams, Build Keycloak and 12 more | 2025-07-08 | 7.4 High |
| A flaw was found in Keycloak's OIDC component in the "checkLoginIframe," which allows unvalidated cross-origin messages. This flaw allows attackers to coordinate and send millions of requests in seconds using simple code, significantly impacting the application's availability without proper origin validation for incoming messages. | ||||
| CVE-2024-1635 | 2 Netapp, Redhat | 26 Active Iq Unified Manager, Oncommand Workflow Automation, Amq Streams and 23 more | 2025-07-08 | 7.5 High |
| A vulnerability was found in Undertow. This vulnerability impacts a server that supports the wildfly-http-client protocol. Whenever a malicious user opens and closes a connection with the HTTP port of the server and then closes the connection immediately, the server will end with both memory and open file limits exhausted at some point, depending on the amount of memory available. At HTTP upgrade to remoting, the WriteTimeoutStreamSinkConduit leaks connections if RemotingConnection is closed by Remoting ServerConnectionOpenListener. Because the remoting connection originates in Undertow as part of the HTTP upgrade, there is an external layer to the remoting connection. This connection is unaware of the outermost layer when closing the connection during the connection opening procedure. Hence, the Undertow WriteTimeoutStreamSinkConduit is not notified of the closed connection in this scenario. Because WriteTimeoutStreamSinkConduit creates a timeout task, the whole dependency tree leaks via that task, which is added to XNIO WorkerThread. So, the workerThread points to the Undertow conduit, which contains the connections and causes the leak. | ||||
| CVE-2024-1132 | 1 Redhat | 23 Amq Broker, Build Keycloak, Build Of Keycloak and 20 more | 2025-07-08 | 8.1 High |
| A flaw was found in Keycloak, where it does not properly validate URLs included in a redirect. This issue could allow an attacker to construct a malicious request to bypass validation and access other URLs and sensitive information within the domain or conduct further attacks. This flaw affects any client that utilizes a wildcard in the Valid Redirect URIs field, and requires user interaction within the malicious URL. | ||||
| CVE-2024-6162 | 1 Redhat | 11 Apache Camel Hawtio, Apache Camel Spring Boot, Build Keycloak and 8 more | 2025-06-24 | 7.5 High |
| A vulnerability was found in Undertow, where URL-encoded request paths can be mishandled during concurrent requests on the AJP listener. This issue arises because the same buffer is used to decode the paths for multiple requests simultaneously, leading to incorrect path information being processed. As a result, the server may attempt to access the wrong path, causing errors such as "404 Not Found" or other application failures. This flaw can potentially lead to a denial of service, as legitimate resources become inaccessible due to the path mix-up. | ||||
| CVE-2024-1300 | 1 Redhat | 20 A Mq Clients, Amq Broker, Amq Streams and 17 more | 2025-06-24 | 5.4 Medium |
| A vulnerability in the Eclipse Vert.x toolkit causes a memory leak in TCP servers configured with TLS and SNI support. When processing an unknown SNI server name assigned the default certificate instead of a mapped certificate, the SSL context is erroneously cached in the server name map, leading to memory exhaustion. This flaw allows attackers to send TLS client hello messages with fake server names, triggering a JVM out-of-memory error. | ||||
| CVE-2024-1023 | 1 Redhat | 20 A Mq Clients, Amq Broker, Amq Streams and 17 more | 2025-06-24 | 6.5 Medium |
| A vulnerability in the Eclipse Vert.x toolkit results in a memory leak due to using Netty FastThreadLocal data structures. Specifically, when the Vert.x HTTP client establishes connections to different hosts, triggering the memory leak. The leak can be accelerated with intimate runtime knowledge, allowing an attacker to exploit this vulnerability. For instance, a server accepting arbitrary internet addresses could serve as an attack vector by connecting to these addresses, thereby accelerating the memory leak. | ||||
| CVE-2025-5416 | 1 Redhat | 1 Build Keycloak | 2025-06-23 | 2.7 Low |
| A vulnerability has been identified in Keycloak that could lead to unauthorized information disclosure. While it requires an already authenticated user, the /admin/serverinfo endpoint can inadvertently provide sensitive environment information. | ||||
| CVE-2024-1102 | 2 Jberet, Redhat | 7 Jberet, Build Keycloak, Jboss Data Grid and 4 more | 2025-06-18 | 6.5 Medium |
| A vulnerability was found in jberet-core logging. An exception in 'dbProperties' might display user credentials such as the username and password for the database-connection. | ||||
| CVE-2024-2700 | 1 Redhat | 11 Amq Streams, Apache Camel Hawtio, Apicurio Registry and 8 more | 2025-06-18 | 7 High |
| A vulnerability was found in the quarkus-core component. Quarkus captures local environment variables from the Quarkus namespace during the application's build, therefore, running the resulting application inherits the values captured at build time. Some local environment variables may have been set by the developer or CI environment for testing purposes, such as dropping the database during application startup or trusting all TLS certificates to accept self-signed certificates. If these properties are configured using environment variables or the .env facility, they are captured into the built application, which can lead to dangerous behavior if the application does not override these values. This behavior only happens for configuration properties from the `quarkus.*` namespace. Application-specific properties are not captured. | ||||
| CVE-2024-1597 | 4 Fedoraproject, Pgjdbc, Postgresql and 1 more | 14 Fedora, Pgjdbc, Postgresql Jdbc Driver and 11 more | 2025-06-12 | 10 Critical |
| pgjdbc, the PostgreSQL JDBC Driver, allows attacker to inject SQL if using PreferQueryMode=SIMPLE. Note this is not the default. In the default mode there is no vulnerability. A placeholder for a numeric value must be immediately preceded by a minus. There must be a second placeholder for a string value after the first placeholder; both must be on the same line. By constructing a matching string payload, the attacker can inject SQL to alter the query,bypassing the protections that parameterized queries bring against SQL Injection attacks. Versions before 42.7.2, 42.6.1, 42.5.5, 42.4.4, 42.3.9, and 42.2.28 are affected. | ||||
| CVE-2025-3501 | 1 Redhat | 2 Build Keycloak, Red Hat Single Sign On | 2025-06-09 | 8.2 High |
| A flaw was found in Keycloak. By setting a verification policy to 'ALL', the trust store certificate verification is skipped, which is unintended. | ||||
| CVE-2025-2559 | 1 Redhat | 2 Build Keycloak, Red Hat Single Sign On | 2025-06-04 | 4.9 Medium |
| A flaw was found in Keycloak. When the configuration uses JWT tokens for authentication, the tokens are cached until expiration. If a client uses JWT tokens with an excessively long expiration time, for example, 24 or 48 hours, the cache can grow indefinitely, leading to an OutOfMemoryError. This issue could result in a denial of service condition, preventing legitimate users from accessing the system. | ||||
| CVE-2023-6717 | 1 Redhat | 15 Amq Broker, Build Keycloak, Jboss Data Grid and 12 more | 2025-05-08 | 6 Medium |
| A flaw was found in the SAML client registration in Keycloak that could allow an administrator to register malicious JavaScript URIs as Assertion Consumer Service POST Binding URLs (ACS), posing a Cross-Site Scripting (XSS) risk. This issue may allow a malicious admin in one realm or a client with registration access to target users in different realms or applications, executing arbitrary JavaScript in their contexts upon form submission. This can enable unauthorized access and harmful actions, compromising the confidentiality, integrity, and availability of the complete KC instance. | ||||
| CVE-2024-7318 | 1 Redhat | 2 Build Keycloak, Build Of Keycloak | 2025-05-02 | 4.8 Medium |
| A vulnerability was found in Keycloak. Expired OTP codes are still usable when using FreeOTP when the OTP token period is set to 30 seconds (default). Instead of expiring and deemed unusable around 30 seconds in, the tokens are valid for an additional 30 seconds totaling 1 minute. A one time passcode that is valid longer than its expiration time increases the attack window for malicious actors to abuse the system and compromise accounts. Additionally, it increases the attack surface because at any given time, two OTPs are valid. | ||||
| CVE-2024-8883 | 1 Redhat | 10 Build Keycloak, Build Of Keycloak, Jboss Enterprise Application Platform and 7 more | 2025-05-02 | 6.1 Medium |
| A misconfiguration flaw was found in Keycloak. This issue can allow an attacker to redirect users to an arbitrary URL if a 'Valid Redirect URI' is set to http://localhost or http://127.0.0.1, enabling sensitive information such as authorization codes to be exposed to the attacker, potentially leading to session hijacking. | ||||
| CVE-2024-7260 | 1 Redhat | 3 Build Keycloak, Build Of Keycloak, Keycloak | 2025-05-02 | 6.1 Medium |
| An open redirect vulnerability was found in Keycloak. A specially crafted URL can be constructed where the referrer and referrer_uri parameters are made to trick a user to visit a malicious webpage. A trusted URL can trick users and automation into believing that the URL is safe, when, in fact, it redirects to a malicious server. This issue can result in a victim inadvertently trusting the destination of the redirect, potentially leading to a successful phishing attack or other types of attacks. Once a crafted URL is made, it can be sent to a Keycloak admin via email for example. This will trigger this vulnerability when the user visits the page and clicks the link. A malicious actor can use this to target users they know are Keycloak admins for further attacks. It may also be possible to bypass other domain-related security checks, such as supplying this as a OAuth redirect uri. The malicious actor can further obfuscate the redirect_uri using URL encoding, to hide the text of the actual malicious website domain. | ||||
| CVE-2025-0604 | 1 Redhat | 2 Build Keycloak, Red Hat Single Sign On | 2025-05-01 | 5.4 Medium |
| A flaw was found in Keycloak. When an Active Directory user resets their password, the system updates it without performing an LDAP bind to validate the new credentials against AD. This vulnerability allows users whose AD accounts are expired or disabled to regain access in Keycloak, bypassing AD restrictions. The issue enables authentication bypass and could allow unauthorized access under certain conditions. | ||||
| CVE-2024-12369 | 1 Redhat | 2 Build Keycloak, Jboss Enterprise Application Platform | 2025-04-17 | 4.2 Medium |
| A vulnerability was found in OIDC-Client. When using the RH SSO OIDC adapter with EAP 7.x or when using the elytron-oidc-client subsystem with EAP 8.x, authorization code injection attacks can occur, allowing an attacker to inject a stolen authorization code into the attacker's own session with the client with a victim's identity. This is usually done with a Man-in-the-Middle (MitM) or phishing attack. | ||||