Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15515 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49093 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: skbuff: fix coalescing for page_pool fragment recycling Fix a use-after-free when using page_pool with page fragments. We encountered this problem during normal RX in the hns3 driver: (1) Initially we have three descriptors in the RX queue. The first one allocates PAGE1 through page_pool, and the other two allocate one half of PAGE2 each. Page references look like this: RX_BD1 _______ PAGE1 RX_BD2 _______ PAGE2 RX_BD3 _________/ (2) Handle RX on the first descriptor. Allocate SKB1, eventually added to the receive queue by tcp_queue_rcv(). (3) Handle RX on the second descriptor. Allocate SKB2 and pass it to netif_receive_skb(): netif_receive_skb(SKB2) ip_rcv(SKB2) SKB3 = skb_clone(SKB2) SKB2 and SKB3 share a reference to PAGE2 through skb_shinfo()->dataref. The other ref to PAGE2 is still held by RX_BD3: SKB2 ---+- PAGE2 SKB3 __/ / RX_BD3 _________/ (3b) Now while handling TCP, coalesce SKB3 with SKB1: tcp_v4_rcv(SKB3) tcp_try_coalesce(to=SKB1, from=SKB3) // succeeds kfree_skb_partial(SKB3) skb_release_data(SKB3) // drops one dataref SKB1 _____ PAGE1 \____ SKB2 _____ PAGE2 / RX_BD3 _________/ In skb_try_coalesce(), __skb_frag_ref() takes a page reference to PAGE2, where it should instead have increased the page_pool frag reference, pp_frag_count. Without coalescing, when releasing both SKB2 and SKB3, a single reference to PAGE2 would be dropped. Now when releasing SKB1 and SKB2, two references to PAGE2 will be dropped, resulting in underflow. (3c) Drop SKB2: af_packet_rcv(SKB2) consume_skb(SKB2) skb_release_data(SKB2) // drops second dataref page_pool_return_skb_page(PAGE2) // drops one pp_frag_count SKB1 _____ PAGE1 \____ PAGE2 / RX_BD3 _________/ (4) Userspace calls recvmsg() Copies SKB1 and releases it. Since SKB3 was coalesced with SKB1, we release the SKB3 page as well: tcp_eat_recv_skb(SKB1) skb_release_data(SKB1) page_pool_return_skb_page(PAGE1) page_pool_return_skb_page(PAGE2) // drops second pp_frag_count (5) PAGE2 is freed, but the third RX descriptor was still using it! In our case this causes IOMMU faults, but it would silently corrupt memory if the IOMMU was disabled. Change the logic that checks whether pp_recycle SKBs can be coalesced. We still reject differing pp_recycle between 'from' and 'to' SKBs, but in order to avoid the situation described above, we also reject coalescing when both 'from' and 'to' are pp_recycled and 'from' is cloned. The new logic allows coalescing a cloned pp_recycle SKB into a page refcounted one, because in this case the release (4) will drop the right reference, the one taken by skb_try_coalesce(). | ||||
| CVE-2022-49087 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: fix a race in rxrpc_exit_net() Current code can lead to the following race: CPU0 CPU1 rxrpc_exit_net() rxrpc_peer_keepalive_worker() if (rxnet->live) rxnet->live = false; del_timer_sync(&rxnet->peer_keepalive_timer); timer_reduce(&rxnet->peer_keepalive_timer, jiffies + delay); cancel_work_sync(&rxnet->peer_keepalive_work); rxrpc_exit_net() exits while peer_keepalive_timer is still armed, leading to use-after-free. syzbot report was: ODEBUG: free active (active state 0) object type: timer_list hint: rxrpc_peer_keepalive_timeout+0x0/0xb0 WARNING: CPU: 0 PID: 3660 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 3660 Comm: kworker/u4:6 Not tainted 5.17.0-syzkaller-13993-g88e6c0207623 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd 00 1c 26 8a 4c 89 ee 48 c7 c7 00 10 26 8a e8 b1 e7 28 05 <0f> 0b 83 05 15 eb c5 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000353fb00 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff888029196140 RSI: ffffffff815efad8 RDI: fffff520006a7f52 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815ea4ae R11: 0000000000000000 R12: ffffffff89ce23e0 R13: ffffffff8a2614e0 R14: ffffffff816628c0 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f2908924 CR3: 0000000043720000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __debug_check_no_obj_freed lib/debugobjects.c:992 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1023 kfree+0xd6/0x310 mm/slab.c:3809 ops_free_list.part.0+0x119/0x370 net/core/net_namespace.c:176 ops_free_list net/core/net_namespace.c:174 [inline] cleanup_net+0x591/0xb00 net/core/net_namespace.c:598 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 </TASK> | ||||
| CVE-2022-49029 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (ibmpex) Fix possible UAF when ibmpex_register_bmc() fails Smatch report warning as follows: drivers/hwmon/ibmpex.c:509 ibmpex_register_bmc() warn: '&data->list' not removed from list If ibmpex_find_sensors() fails in ibmpex_register_bmc(), data will be freed, but data->list will not be removed from driver_data.bmc_data, then list traversal may cause UAF. Fix by removeing it from driver_data.bmc_data before free(). | ||||
| CVE-2022-49028 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ixgbevf: Fix resource leak in ixgbevf_init_module() ixgbevf_init_module() won't destroy the workqueue created by create_singlethread_workqueue() when pci_register_driver() failed. Add destroy_workqueue() in fail path to prevent the resource leak. Similar to the handling of u132_hcd_init in commit f276e002793c ("usb: u132-hcd: fix resource leak") | ||||
| CVE-2022-49022 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac8021: fix possible oob access in ieee80211_get_rate_duration Fix possible out-of-bound access in ieee80211_get_rate_duration routine as reported by the following UBSAN report: UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47 index 15 is out of range for type 'u16 [12]' CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017 Workqueue: mt76 mt76u_tx_status_data [mt76_usb] Call Trace: <TASK> show_stack+0x4e/0x61 dump_stack_lvl+0x4a/0x6f dump_stack+0x10/0x18 ubsan_epilogue+0x9/0x43 __ubsan_handle_out_of_bounds.cold+0x42/0x47 ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211] ? ieee80211_tx_status_ext+0x32e/0x640 [mac80211] ieee80211_calc_rx_airtime+0xda/0x120 [mac80211] ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211] mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib] mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib] mt76u_tx_status_data+0x67/0xd0 [mt76_usb] process_one_work+0x225/0x400 worker_thread+0x50/0x3e0 ? process_one_work+0x400/0x400 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 | ||||
| CVE-2022-49014 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: tun: Fix use-after-free in tun_detach() syzbot reported use-after-free in tun_detach() [1]. This causes call trace like below: ================================================================== BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673 CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22e422 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x461 mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] netdev_wait_allrefs_any net/core/dev.c:10237 [inline] netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351 tun_detach drivers/net/tun.c:704 [inline] tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xb3d/0x2a30 kernel/exit.c:820 do_group_exit+0xd4/0x2a0 kernel/exit.c:950 get_signal+0x21b1/0x2440 kernel/signal.c:2858 arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd The cause of the issue is that sock_put() from __tun_detach() drops last reference count for struct net, and then notifier_call_chain() from netdev_state_change() accesses that struct net. This patch fixes the issue by calling sock_put() from tun_detach() after all necessary accesses for the struct net has done. | ||||
| CVE-2022-49011 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new() As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it after using to avoid refcount leak. | ||||
| CVE-2022-49010 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (coretemp) Check for null before removing sysfs attrs If coretemp_add_core() gets an error then pdata->core_data[indx] is already NULL and has been kfreed. Don't pass that to sysfs_remove_group() as that will crash in sysfs_remove_group(). [Shortened for readability] [91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label' <cpu offline> [91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188 [91855.165103] #PF: supervisor read access in kernel mode [91855.194506] #PF: error_code(0x0000) - not-present page [91855.224445] PGD 0 P4D 0 [91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI ... [91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80 ... [91855.796571] Call Trace: [91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp] [91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp] [91855.871107] cpuhp_invoke_callback+0x105/0x4b0 [91855.893432] cpuhp_thread_fun+0x8e/0x150 ... Fix this by checking for NULL first. | ||||
| CVE-2022-49006 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Free buffers when a used dynamic event is removed After 65536 dynamic events have been added and removed, the "type" field of the event then uses the first type number that is available (not currently used by other events). A type number is the identifier of the binary blobs in the tracing ring buffer (known as events) to map them to logic that can parse the binary blob. The issue is that if a dynamic event (like a kprobe event) is traced and is in the ring buffer, and then that event is removed (because it is dynamic, which means it can be created and destroyed), if another dynamic event is created that has the same number that new event's logic on parsing the binary blob will be used. To show how this can be an issue, the following can crash the kernel: # cd /sys/kernel/tracing # for i in `seq 65536`; do echo 'p:kprobes/foo do_sys_openat2 $arg1:u32' > kprobe_events # done For every iteration of the above, the writing to the kprobe_events will remove the old event and create a new one (with the same format) and increase the type number to the next available on until the type number reaches over 65535 which is the max number for the 16 bit type. After it reaches that number, the logic to allocate a new number simply looks for the next available number. When an dynamic event is removed, that number is then available to be reused by the next dynamic event created. That is, once the above reaches the max number, the number assigned to the event in that loop will remain the same. Now that means deleting one dynamic event and created another will reuse the previous events type number. This is where bad things can happen. After the above loop finishes, the kprobes/foo event which reads the do_sys_openat2 function call's first parameter as an integer. # echo 1 > kprobes/foo/enable # cat /etc/passwd > /dev/null # cat trace cat-2211 [005] .... 2007.849603: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849620: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849838: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 cat-2211 [005] .... 2007.849880: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196 # echo 0 > kprobes/foo/enable Now if we delete the kprobe and create a new one that reads a string: # echo 'p:kprobes/foo do_sys_openat2 +0($arg2):string' > kprobe_events And now we can the trace: # cat trace sendmail-1942 [002] ..... 530.136320: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930817: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.930961: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.934278: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������" cat-2046 [004] ..... 530.934563: foo: (do_sys_openat2+0x0/0x240) arg1="��������������������������������������� ---truncated--- | ||||
| CVE-2022-48997 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: char: tpm: Protect tpm_pm_suspend with locks Currently tpm transactions are executed unconditionally in tpm_pm_suspend() function, which may lead to races with other tpm accessors in the system. Specifically, the hw_random tpm driver makes use of tpm_get_random(), and this function is called in a loop from a kthread, which means it's not frozen alongside userspace, and so can race with the work done during system suspend: tpm tpm0: tpm_transmit: tpm_recv: error -52 tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ #135 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Call Trace: tpm_tis_status.cold+0x19/0x20 tpm_transmit+0x13b/0x390 tpm_transmit_cmd+0x20/0x80 tpm1_pm_suspend+0xa6/0x110 tpm_pm_suspend+0x53/0x80 __pnp_bus_suspend+0x35/0xe0 __device_suspend+0x10f/0x350 Fix this by calling tpm_try_get_ops(), which itself is a wrapper around tpm_chip_start(), but takes the appropriate mutex. [Jason: reworked commit message, added metadata] | ||||
| CVE-2022-48992 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: soc-pcm: Add NULL check in BE reparenting Add NULL check in dpcm_be_reparent API, to handle kernel NULL pointer dereference error. The issue occurred in fuzzing test. | ||||
| CVE-2022-48991 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/khugepaged: invoke MMU notifiers in shmem/file collapse paths Any codepath that zaps page table entries must invoke MMU notifiers to ensure that secondary MMUs (like KVM) don't keep accessing pages which aren't mapped anymore. Secondary MMUs don't hold their own references to pages that are mirrored over, so failing to notify them can lead to page use-after-free. I'm marking this as addressing an issue introduced in commit f3f0e1d2150b ("khugepaged: add support of collapse for tmpfs/shmem pages"), but most of the security impact of this only came in commit 27e1f8273113 ("khugepaged: enable collapse pmd for pte-mapped THP"), which actually omitted flushes for the removal of present PTEs, not just for the removal of empty page tables. | ||||
| CVE-2022-48989 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fscache: Fix oops due to race with cookie_lru and use_cookie If a cookie expires from the LRU and the LRU_DISCARD flag is set, but the state machine has not run yet, it's possible another thread can call fscache_use_cookie and begin to use it. When the cookie_worker finally runs, it will see the LRU_DISCARD flag set, transition the cookie->state to LRU_DISCARDING, which will then withdraw the cookie. Once the cookie is withdrawn the object is removed the below oops will occur because the object associated with the cookie is now NULL. Fix the oops by clearing the LRU_DISCARD bit if another thread uses the cookie before the cookie_worker runs. BUG: kernel NULL pointer dereference, address: 0000000000000008 ... CPU: 31 PID: 44773 Comm: kworker/u130:1 Tainted: G E 6.0.0-5.dneg.x86_64 #1 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 08/26/2022 Workqueue: events_unbound netfs_rreq_write_to_cache_work [netfs] RIP: 0010:cachefiles_prepare_write+0x28/0x90 [cachefiles] ... Call Trace: netfs_rreq_write_to_cache_work+0x11c/0x320 [netfs] process_one_work+0x217/0x3e0 worker_thread+0x4a/0x3b0 kthread+0xd6/0x100 | ||||
| CVE-2022-48988 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: memcg: fix possible use-after-free in memcg_write_event_control() memcg_write_event_control() accesses the dentry->d_name of the specified control fd to route the write call. As a cgroup interface file can't be renamed, it's safe to access d_name as long as the specified file is a regular cgroup file. Also, as these cgroup interface files can't be removed before the directory, it's safe to access the parent too. Prior to 347c4a874710 ("memcg: remove cgroup_event->cft"), there was a call to __file_cft() which verified that the specified file is a regular cgroupfs file before further accesses. The cftype pointer returned from __file_cft() was no longer necessary and the commit inadvertently dropped the file type check with it allowing any file to slip through. With the invarients broken, the d_name and parent accesses can now race against renames and removals of arbitrary files and cause use-after-free's. Fix the bug by resurrecting the file type check in __file_cft(). Now that cgroupfs is implemented through kernfs, checking the file operations needs to go through a layer of indirection. Instead, let's check the superblock and dentry type. | ||||
| CVE-2022-48978 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: HID: core: fix shift-out-of-bounds in hid_report_raw_event Syzbot reported shift-out-of-bounds in hid_report_raw_event. microsoft 0003:045E:07DA.0001: hid_field_extract() called with n (128) > 32! (swapper/0) ====================================================================== UBSAN: shift-out-of-bounds in drivers/hid/hid-core.c:1323:20 shift exponent 127 is too large for 32-bit type 'int' CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.1.0-rc4-syzkaller-00159-g4bbf3422df78 #0 Hardware name: Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1e3/0x2cb lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x3a6/0x420 lib/ubsan.c:322 snto32 drivers/hid/hid-core.c:1323 [inline] hid_input_fetch_field drivers/hid/hid-core.c:1572 [inline] hid_process_report drivers/hid/hid-core.c:1665 [inline] hid_report_raw_event+0xd56/0x18b0 drivers/hid/hid-core.c:1998 hid_input_report+0x408/0x4f0 drivers/hid/hid-core.c:2066 hid_irq_in+0x459/0x690 drivers/hid/usbhid/hid-core.c:284 __usb_hcd_giveback_urb+0x369/0x530 drivers/usb/core/hcd.c:1671 dummy_timer+0x86b/0x3110 drivers/usb/gadget/udc/dummy_hcd.c:1988 call_timer_fn+0xf5/0x210 kernel/time/timer.c:1474 expire_timers kernel/time/timer.c:1519 [inline] __run_timers+0x76a/0x980 kernel/time/timer.c:1790 run_timer_softirq+0x63/0xf0 kernel/time/timer.c:1803 __do_softirq+0x277/0x75b kernel/softirq.c:571 __irq_exit_rcu+0xec/0x170 kernel/softirq.c:650 irq_exit_rcu+0x5/0x20 kernel/softirq.c:662 sysvec_apic_timer_interrupt+0x91/0xb0 arch/x86/kernel/apic/apic.c:1107 ====================================================================== If the size of the integer (unsigned n) is bigger than 32 in snto32(), shift exponent will be too large for 32-bit type 'int', resulting in a shift-out-of-bounds bug. Fix this by adding a check on the size of the integer (unsigned n) in snto32(). To add support for n greater than 32 bits, set n to 32, if n is greater than 32. | ||||
| CVE-2022-48975 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpiolib: fix memory leak in gpiochip_setup_dev() Here is a backtrace report about memory leak detected in gpiochip_setup_dev(): unreferenced object 0xffff88810b406400 (size 512): comm "python3", pid 1682, jiffies 4295346908 (age 24.090s) backtrace: kmalloc_trace device_add device_private_init at drivers/base/core.c:3361 (inlined by) device_add at drivers/base/core.c:3411 cdev_device_add gpiolib_cdev_register gpiochip_setup_dev gpiochip_add_data_with_key gcdev_register() & gcdev_unregister() would call device_add() & device_del() (no matter CONFIG_GPIO_CDEV is enabled or not) to register/unregister device. However, if device_add() succeeds, some resource (like struct device_private allocated by device_private_init()) is not released by device_del(). Therefore, after device_add() succeeds by gcdev_register(), it needs to call put_device() to release resource in the error handle path. Here we move forward the register of release function, and let it release every piece of resource by put_device() instead of kfree(). While at it, fix another subtle issue, i.e. when gc->ngpio is equal to 0, we still call kcalloc() and, in case of further error, kfree() on the ZERO_PTR pointer, which is not NULL. It's not a bug per se, but rather waste of the resources and potentially wrong expectation about contents of the gdev->descs variable. | ||||
| CVE-2022-48974 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: conntrack: fix using __this_cpu_add in preemptible Currently in nf_conntrack_hash_check_insert(), when it fails in nf_ct_ext_valid_pre/post(), NF_CT_STAT_INC() will be called in the preemptible context, a call trace can be triggered: BUG: using __this_cpu_add() in preemptible [00000000] code: conntrack/1636 caller is nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack] Call Trace: <TASK> dump_stack_lvl+0x33/0x46 check_preemption_disabled+0xc3/0xf0 nf_conntrack_hash_check_insert+0x45/0x430 [nf_conntrack] ctnetlink_create_conntrack+0x3cd/0x4e0 [nf_conntrack_netlink] ctnetlink_new_conntrack+0x1c0/0x450 [nf_conntrack_netlink] nfnetlink_rcv_msg+0x277/0x2f0 [nfnetlink] netlink_rcv_skb+0x50/0x100 nfnetlink_rcv+0x65/0x144 [nfnetlink] netlink_unicast+0x1ae/0x290 netlink_sendmsg+0x257/0x4f0 sock_sendmsg+0x5f/0x70 This patch is to fix it by changing to use NF_CT_STAT_INC_ATOMIC() for nf_ct_ext_valid_pre/post() check in nf_conntrack_hash_check_insert(), as well as nf_ct_ext_valid_post() in __nf_conntrack_confirm(). Note that nf_ct_ext_valid_pre() check in __nf_conntrack_confirm() is safe to use NF_CT_STAT_INC(), as it's under local_bh_disable(). | ||||
| CVE-2022-48969 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xen-netfront: Fix NULL sring after live migration A NAPI is setup for each network sring to poll data to kernel The sring with source host is destroyed before live migration and new sring with target host is setup after live migration. The NAPI for the old sring is not deleted until setup new sring with target host after migration. With busy_poll/busy_read enabled, the NAPI can be polled before got deleted when resume VM. BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 IP: xennet_poll+0xae/0xd20 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI Call Trace: finish_task_switch+0x71/0x230 timerqueue_del+0x1d/0x40 hrtimer_try_to_cancel+0xb5/0x110 xennet_alloc_rx_buffers+0x2a0/0x2a0 napi_busy_loop+0xdb/0x270 sock_poll+0x87/0x90 do_sys_poll+0x26f/0x580 tracing_map_insert+0x1d4/0x2f0 event_hist_trigger+0x14a/0x260 finish_task_switch+0x71/0x230 __schedule+0x256/0x890 recalc_sigpending+0x1b/0x50 xen_sched_clock+0x15/0x20 __rb_reserve_next+0x12d/0x140 ring_buffer_lock_reserve+0x123/0x3d0 event_triggers_call+0x87/0xb0 trace_event_buffer_commit+0x1c4/0x210 xen_clocksource_get_cycles+0x15/0x20 ktime_get_ts64+0x51/0xf0 SyS_ppoll+0x160/0x1a0 SyS_ppoll+0x160/0x1a0 do_syscall_64+0x73/0x130 entry_SYSCALL_64_after_hwframe+0x41/0xa6 ... RIP: xennet_poll+0xae/0xd20 RSP: ffffb4f041933900 CR2: 0000000000000008 ---[ end trace f8601785b354351c ]--- xen frontend should remove the NAPIs for the old srings before live migration as the bond srings are destroyed There is a tiny window between the srings are set to NULL and the NAPIs are disabled, It is safe as the NAPI threads are still frozen at that time | ||||
| CVE-2022-48947 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: Fix u8 overflow By keep sending L2CAP_CONF_REQ packets, chan->num_conf_rsp increases multiple times and eventually it will wrap around the maximum number (i.e., 255). This patch prevents this by adding a boundary check with L2CAP_MAX_CONF_RSP Btmon log: Bluetooth monitor ver 5.64 = Note: Linux version 6.1.0-rc2 (x86_64) 0.264594 = Note: Bluetooth subsystem version 2.22 0.264636 @ MGMT Open: btmon (privileged) version 1.22 {0x0001} 0.272191 = New Index: 00:00:00:00:00:00 (Primary,Virtual,hci0) [hci0] 13.877604 @ RAW Open: 9496 (privileged) version 2.22 {0x0002} 13.890741 = Open Index: 00:00:00:00:00:00 [hci0] 13.900426 (...) > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #32 [hci0] 14.273106 invalid packet size (12 != 1033) 08 00 01 00 02 01 04 00 01 10 ff ff ............ > ACL Data RX: Handle 200 flags 0x00 dlen 1547 #33 [hci0] 14.273561 invalid packet size (14 != 1547) 0a 00 01 00 04 01 06 00 40 00 00 00 00 00 ........@..... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #34 [hci0] 14.274390 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 00 00 00 04 ........@....... > ACL Data RX: Handle 200 flags 0x00 dlen 2061 #35 [hci0] 14.274932 invalid packet size (16 != 2061) 0c 00 01 00 04 01 08 00 40 00 00 00 07 00 03 00 ........@....... = bluetoothd: Bluetooth daemon 5.43 14.401828 > ACL Data RX: Handle 200 flags 0x00 dlen 1033 #36 [hci0] 14.275753 invalid packet size (12 != 1033) 08 00 01 00 04 01 04 00 40 00 00 00 ........@... | ||||
| CVE-2022-48943 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhev Hypervisor | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: make apf token non-zero to fix bug In current async pagefault logic, when a page is ready, KVM relies on kvm_arch_can_dequeue_async_page_present() to determine whether to deliver a READY event to the Guest. This function test token value of struct kvm_vcpu_pv_apf_data, which must be reset to zero by Guest kernel when a READY event is finished by Guest. If value is zero meaning that a READY event is done, so the KVM can deliver another. But the kvm_arch_setup_async_pf() may produce a valid token with zero value, which is confused with previous mention and may lead the loss of this READY event. This bug may cause task blocked forever in Guest: INFO: task stress:7532 blocked for more than 1254 seconds. Not tainted 5.10.0 #16 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:stress state:D stack: 0 pid: 7532 ppid: 1409 flags:0x00000080 Call Trace: __schedule+0x1e7/0x650 schedule+0x46/0xb0 kvm_async_pf_task_wait_schedule+0xad/0xe0 ? exit_to_user_mode_prepare+0x60/0x70 __kvm_handle_async_pf+0x4f/0xb0 ? asm_exc_page_fault+0x8/0x30 exc_page_fault+0x6f/0x110 ? asm_exc_page_fault+0x8/0x30 asm_exc_page_fault+0x1e/0x30 RIP: 0033:0x402d00 RSP: 002b:00007ffd31912500 EFLAGS: 00010206 RAX: 0000000000071000 RBX: ffffffffffffffff RCX: 00000000021a32b0 RDX: 000000000007d011 RSI: 000000000007d000 RDI: 00000000021262b0 RBP: 00000000021262b0 R08: 0000000000000003 R09: 0000000000000086 R10: 00000000000000eb R11: 00007fefbdf2baa0 R12: 0000000000000000 R13: 0000000000000002 R14: 000000000007d000 R15: 0000000000001000 | ||||