Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15515 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2022-49647 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cgroup: Use separate src/dst nodes when preloading css_sets for migration Each cset (css_set) is pinned by its tasks. When we're moving tasks around across csets for a migration, we need to hold the source and destination csets to ensure that they don't go away while we're moving tasks about. This is done by linking cset->mg_preload_node on either the mgctx->preloaded_src_csets or mgctx->preloaded_dst_csets list. Using the same cset->mg_preload_node for both the src and dst lists was deemed okay as a cset can't be both the source and destination at the same time. Unfortunately, this overloading becomes problematic when multiple tasks are involved in a migration and some of them are identity noop migrations while others are actually moving across cgroups. For example, this can happen with the following sequence on cgroup1: #1> mkdir -p /sys/fs/cgroup/misc/a/b #2> echo $$ > /sys/fs/cgroup/misc/a/cgroup.procs #3> RUN_A_COMMAND_WHICH_CREATES_MULTIPLE_THREADS & #4> PID=$! #5> echo $PID > /sys/fs/cgroup/misc/a/b/tasks #6> echo $PID > /sys/fs/cgroup/misc/a/cgroup.procs the process including the group leader back into a. In this final migration, non-leader threads would be doing identity migration while the group leader is doing an actual one. After #3, let's say the whole process was in cset A, and that after #4, the leader moves to cset B. Then, during #6, the following happens: 1. cgroup_migrate_add_src() is called on B for the leader. 2. cgroup_migrate_add_src() is called on A for the other threads. 3. cgroup_migrate_prepare_dst() is called. It scans the src list. 4. It notices that B wants to migrate to A, so it tries to A to the dst list but realizes that its ->mg_preload_node is already busy. 5. and then it notices A wants to migrate to A as it's an identity migration, it culls it by list_del_init()'ing its ->mg_preload_node and putting references accordingly. 6. The rest of migration takes place with B on the src list but nothing on the dst list. This means that A isn't held while migration is in progress. If all tasks leave A before the migration finishes and the incoming task pins it, the cset will be destroyed leading to use-after-free. This is caused by overloading cset->mg_preload_node for both src and dst preload lists. We wanted to exclude the cset from the src list but ended up inadvertently excluding it from the dst list too. This patch fixes the issue by separating out cset->mg_preload_node into ->mg_src_preload_node and ->mg_dst_preload_node, so that the src and dst preloadings don't interfere with each other. | ||||
| CVE-2022-49636 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vlan: fix memory leak in vlan_newlink() Blamed commit added back a bug I fixed in commit 9bbd917e0bec ("vlan: fix memory leak in vlan_dev_set_egress_priority") If a memory allocation fails in vlan_changelink() after other allocations succeeded, we need to call vlan_dev_free_egress_priority() to free all allocated memory because after a failed ->newlink() we do not call any methods like ndo_uninit() or dev->priv_destructor(). In following example, if the allocation for last element 2000:2001 fails, we need to free eight prior allocations: ip link add link dummy0 dummy0.100 type vlan id 100 \ egress-qos-map 1:2 2:3 3:4 4:5 5:6 6:7 7:8 8:9 2000:2001 syzbot report was: BUG: memory leak unreferenced object 0xffff888117bd1060 (size 32): comm "syz-executor408", pid 3759, jiffies 4294956555 (age 34.090s) hex dump (first 32 bytes): 09 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff83fc60ad>] kmalloc include/linux/slab.h:600 [inline] [<ffffffff83fc60ad>] vlan_dev_set_egress_priority+0xed/0x170 net/8021q/vlan_dev.c:193 [<ffffffff83fc6628>] vlan_changelink+0x178/0x1d0 net/8021q/vlan_netlink.c:128 [<ffffffff83fc67c8>] vlan_newlink+0x148/0x260 net/8021q/vlan_netlink.c:185 [<ffffffff838b1278>] rtnl_newlink_create net/core/rtnetlink.c:3363 [inline] [<ffffffff838b1278>] __rtnl_newlink+0xa58/0xdc0 net/core/rtnetlink.c:3580 [<ffffffff838b1629>] rtnl_newlink+0x49/0x70 net/core/rtnetlink.c:3593 [<ffffffff838ac66c>] rtnetlink_rcv_msg+0x21c/0x5c0 net/core/rtnetlink.c:6089 [<ffffffff839f9c37>] netlink_rcv_skb+0x87/0x1d0 net/netlink/af_netlink.c:2501 [<ffffffff839f8da7>] netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] [<ffffffff839f8da7>] netlink_unicast+0x397/0x4c0 net/netlink/af_netlink.c:1345 [<ffffffff839f9266>] netlink_sendmsg+0x396/0x710 net/netlink/af_netlink.c:1921 [<ffffffff8384dbf6>] sock_sendmsg_nosec net/socket.c:714 [inline] [<ffffffff8384dbf6>] sock_sendmsg+0x56/0x80 net/socket.c:734 [<ffffffff8384e15c>] ____sys_sendmsg+0x36c/0x390 net/socket.c:2488 [<ffffffff838523cb>] ___sys_sendmsg+0x8b/0xd0 net/socket.c:2542 [<ffffffff838525b8>] __sys_sendmsg net/socket.c:2571 [inline] [<ffffffff838525b8>] __do_sys_sendmsg net/socket.c:2580 [inline] [<ffffffff838525b8>] __se_sys_sendmsg net/socket.c:2578 [inline] [<ffffffff838525b8>] __x64_sys_sendmsg+0x78/0xf0 net/socket.c:2578 [<ffffffff845ad8d5>] do_syscall_x64 arch/x86/entry/common.c:50 [inline] [<ffffffff845ad8d5>] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 [<ffffffff8460006a>] entry_SYSCALL_64_after_hwframe+0x46/0xb0 | ||||
| CVE-2022-49626 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sfc: fix use after free when disabling sriov Use after free is detected by kfence when disabling sriov. What was read after being freed was vf->pci_dev: it was freed from pci_disable_sriov and later read in efx_ef10_sriov_free_vf_vports, called from efx_ef10_sriov_free_vf_vswitching. Set the pointer to NULL at release time to not trying to read it later. Reproducer and dmesg log (note that kfence doesn't detect it every time): $ echo 1 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs $ echo 0 > /sys/class/net/enp65s0f0np0/device/sriov_numvfs BUG: KFENCE: use-after-free read in efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] Use-after-free read at 0x00000000ff3c1ba5 (in kfence-#224): efx_ef10_sriov_free_vf_vswitching+0x82/0x170 [sfc] efx_ef10_pci_sriov_disable+0x38/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae kfence-#224: 0x00000000edb8ef95-0x00000000671f5ce1, size=2792, cache=kmalloc-4k allocated by task 6771 on cpu 10 at 3137.860196s: pci_alloc_dev+0x21/0x60 pci_iov_add_virtfn+0x2a2/0x320 sriov_enable+0x212/0x3e0 efx_ef10_sriov_configure+0x67/0x80 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xba/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae freed by task 6771 on cpu 12 at 3170.991309s: device_release+0x34/0x90 kobject_cleanup+0x3a/0x130 pci_iov_remove_virtfn+0xd9/0x120 sriov_disable+0x30/0xe0 efx_ef10_pci_sriov_disable+0x57/0x70 [sfc] efx_pci_sriov_configure+0x24/0x40 [sfc] sriov_numvfs_store+0xfe/0x140 kernfs_fop_write_iter+0x11c/0x1b0 new_sync_write+0x11f/0x1b0 vfs_write+0x1eb/0x280 ksys_write+0x5f/0xe0 do_syscall_64+0x5c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae | ||||
| CVE-2022-49426 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/arm-smmu-v3-sva: Fix mm use-after-free We currently call arm64_mm_context_put() without holding a reference to the mm, which can result in use-after-free. Call mmgrab()/mmdrop() to ensure the mm only gets freed after we unpinned the ASID. | ||||
| CVE-2022-49416 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: fix use-after-free in chanctx code In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point. However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx. | ||||
| CVE-2022-49413 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bfq: Update cgroup information before merging bio When the process is migrated to a different cgroup (or in case of writeback just starts submitting bios associated with a different cgroup) bfq_merge_bio() can operate with stale cgroup information in bic. Thus the bio can be merged to a request from a different cgroup or it can result in merging of bfqqs for different cgroups or bfqqs of already dead cgroups and causing possible use-after-free issues. Fix the problem by updating cgroup information in bfq_merge_bio(). | ||||
| CVE-2022-49362 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix potential use-after-free in nfsd_file_put() nfsd_file_put_noref() can free @nf, so don't dereference @nf immediately upon return from nfsd_file_put_noref(). | ||||
| CVE-2022-49349 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: fix use-after-free in ext4_rename_dir_prepare We got issue as follows: EXT4-fs (loop0): mounted filesystem without journal. Opts: ,errors=continue ext4_get_first_dir_block: bh->b_data=0xffff88810bee6000 len=34478 ext4_get_first_dir_block: *parent_de=0xffff88810beee6ae bh->b_data=0xffff88810bee6000 ext4_rename_dir_prepare: [1] parent_de=0xffff88810beee6ae ================================================================== BUG: KASAN: use-after-free in ext4_rename_dir_prepare+0x152/0x220 Read of size 4 at addr ffff88810beee6ae by task rep/1895 CPU: 13 PID: 1895 Comm: rep Not tainted 5.10.0+ #241 Call Trace: dump_stack+0xbe/0xf9 print_address_description.constprop.0+0x1e/0x220 kasan_report.cold+0x37/0x7f ext4_rename_dir_prepare+0x152/0x220 ext4_rename+0xf44/0x1ad0 ext4_rename2+0x11c/0x170 vfs_rename+0xa84/0x1440 do_renameat2+0x683/0x8f0 __x64_sys_renameat+0x53/0x60 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f45a6fc41c9 RSP: 002b:00007ffc5a470218 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f45a6fc41c9 RDX: 0000000000000005 RSI: 0000000020000180 RDI: 0000000000000005 RBP: 00007ffc5a470240 R08: 00007ffc5a470160 R09: 0000000020000080 R10: 00000000200001c0 R11: 0000000000000246 R12: 0000000000400bb0 R13: 00007ffc5a470320 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:00000000440015ce refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x10beee flags: 0x200000000000000() raw: 0200000000000000 ffffea00043ff4c8 ffffea0004325608 0000000000000000 raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88810beee580: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee600: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >ffff88810beee680: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ^ ffff88810beee700: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ffff88810beee780: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ================================================================== Disabling lock debugging due to kernel taint ext4_rename_dir_prepare: [2] parent_de->inode=3537895424 ext4_rename_dir_prepare: [3] dir=0xffff888124170140 ext4_rename_dir_prepare: [4] ino=2 ext4_rename_dir_prepare: ent->dir->i_ino=2 parent=-757071872 Reason is first directory entry which 'rec_len' is 34478, then will get illegal parent entry. Now, we do not check directory entry after read directory block in 'ext4_get_first_dir_block'. To solve this issue, check directory entry in 'ext4_get_first_dir_block'. [ Trigger an ext4_error() instead of just warning if the directory is missing a '.' or '..' entry. Also make sure we return an error code if the file system is corrupted. -TYT ] | ||||
| CVE-2022-49328 | 2 Linux, Redhat | 5 Linux Kernel, Enterprise Linux, Rhel Aus and 2 more | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mt76: fix use-after-free by removing a non-RCU wcid pointer Fixes an issue caught by KASAN about use-after-free in mt76_txq_schedule by protecting mtxq->wcid with rcu_lock between mt76_txq_schedule and sta_info_[alloc, free]. [18853.876689] ================================================================== [18853.876751] BUG: KASAN: use-after-free in mt76_txq_schedule+0x204/0xaf8 [mt76] [18853.876773] Read of size 8 at addr ffffffaf989a2138 by task mt76-tx phy0/883 [18853.876786] [18853.876810] CPU: 5 PID: 883 Comm: mt76-tx phy0 Not tainted 5.10.100-fix-510-56778d365941-kasan #5 0b01fbbcf41a530f52043508fec2e31a4215 [18853.876840] Call trace: [18853.876861] dump_backtrace+0x0/0x3ec [18853.876878] show_stack+0x20/0x2c [18853.876899] dump_stack+0x11c/0x1ac [18853.876918] print_address_description+0x74/0x514 [18853.876934] kasan_report+0x134/0x174 [18853.876948] __asan_report_load8_noabort+0x44/0x50 [18853.876976] mt76_txq_schedule+0x204/0xaf8 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877002] mt76_txq_schedule_all+0x2c/0x48 [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877030] mt7921_tx_worker+0xa0/0x1cc [mt7921_common f0875ebac9d7b4754e1010549e7db50fbd90a047] [18853.877054] __mt76_worker_fn+0x190/0x22c [mt76 074e03e4640e97fe7405ee1fab547b81c4fa45d2] [18853.877071] kthread+0x2f8/0x3b8 [18853.877087] ret_from_fork+0x10/0x30 [18853.877098] [18853.877112] Allocated by task 941: [18853.877131] kasan_save_stack+0x38/0x68 [18853.877147] __kasan_kmalloc+0xd4/0xfc [18853.877163] kasan_kmalloc+0x10/0x1c [18853.877177] __kmalloc+0x264/0x3c4 [18853.877294] sta_info_alloc+0x460/0xf88 [mac80211] [18853.877410] ieee80211_prep_connection+0x204/0x1ee0 [mac80211] [18853.877523] ieee80211_mgd_auth+0x6c4/0xa4c [mac80211] [18853.877635] ieee80211_auth+0x20/0x2c [mac80211] [18853.877733] rdev_auth+0x7c/0x438 [cfg80211] [18853.877826] cfg80211_mlme_auth+0x26c/0x390 [cfg80211] [18853.877919] nl80211_authenticate+0x6d4/0x904 [cfg80211] [18853.877938] genl_rcv_msg+0x748/0x93c [18853.877954] netlink_rcv_skb+0x160/0x2a8 [18853.877969] genl_rcv+0x3c/0x54 [18853.877985] netlink_unicast_kernel+0x104/0x1ec [18853.877999] netlink_unicast+0x178/0x268 [18853.878015] netlink_sendmsg+0x3cc/0x5f0 [18853.878030] sock_sendmsg+0xb4/0xd8 [18853.878043] ____sys_sendmsg+0x2f8/0x53c [18853.878058] ___sys_sendmsg+0xe8/0x150 [18853.878071] __sys_sendmsg+0xc4/0x1f4 [18853.878087] __arm64_compat_sys_sendmsg+0x88/0x9c [18853.878101] el0_svc_common+0x1b4/0x390 [18853.878115] do_el0_svc_compat+0x8c/0xdc [18853.878131] el0_svc_compat+0x10/0x1c [18853.878146] el0_sync_compat_handler+0xa8/0xcc [18853.878161] el0_sync_compat+0x188/0x1c0 [18853.878171] [18853.878183] Freed by task 10927: [18853.878200] kasan_save_stack+0x38/0x68 [18853.878215] kasan_set_track+0x28/0x3c [18853.878228] kasan_set_free_info+0x24/0x48 [18853.878244] __kasan_slab_free+0x11c/0x154 [18853.878259] kasan_slab_free+0x14/0x24 [18853.878273] slab_free_freelist_hook+0xac/0x1b0 [18853.878287] kfree+0x104/0x390 [18853.878402] sta_info_free+0x198/0x210 [mac80211] [18853.878515] __sta_info_destroy_part2+0x230/0x2d4 [mac80211] [18853.878628] __sta_info_flush+0x300/0x37c [mac80211] [18853.878740] ieee80211_set_disassoc+0x2cc/0xa7c [mac80211] [18853.878851] ieee80211_mgd_deauth+0x4a4/0x10a0 [mac80211] [18853.878962] ieee80211_deauth+0x20/0x2c [mac80211] [18853.879057] rdev_deauth+0x7c/0x438 [cfg80211] [18853.879150] cfg80211_mlme_deauth+0x274/0x414 [cfg80211] [18853.879243] cfg80211_mlme_down+0xe4/0x118 [cfg80211] [18853.879335] cfg80211_disconnect+0x218/0x2d8 [cfg80211] [18853.879427] __cfg80211_leave+0x17c/0x240 [cfg80211] [18853.879519] cfg80211_leave+0x3c/0x58 [cfg80211] [18853.879611] wiphy_suspend+0xdc/0x200 [cfg80211] [18853.879628] dpm_run_callback+0x58/0x408 [18853.879642] __device_suspend+0x4cc/0x864 [18853.879658] async_suspend+0x34/0xf4 [18 ---truncated--- | ||||
| CVE-2022-49291 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent hw_params and hw_free calls Currently we have neither proper check nor protection against the concurrent calls of PCM hw_params and hw_free ioctls, which may result in a UAF. Since the existing PCM stream lock can't be used for protecting the whole ioctl operations, we need a new mutex to protect those racy calls. This patch introduced a new mutex, runtime->buffer_mutex, and applies it to both hw_params and hw_free ioctl code paths. Along with it, the both functions are slightly modified (the mmap_count check is moved into the state-check block) for code simplicity. | ||||
| CVE-2022-49288 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: pcm: Fix races among concurrent prealloc proc writes We have no protection against concurrent PCM buffer preallocation changes via proc files, and it may potentially lead to UAF or some weird problem. This patch applies the PCM open_mutex to the proc write operation for avoiding the racy proc writes and the PCM stream open (and further operations). | ||||
| CVE-2022-49287 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tpm: fix reference counting for struct tpm_chip The following sequence of operations results in a refcount warning: 1. Open device /dev/tpmrm. 2. Remove module tpm_tis_spi. 3. Write a TPM command to the file descriptor opened at step 1. ------------[ cut here ]------------ WARNING: CPU: 3 PID: 1161 at lib/refcount.c:25 kobject_get+0xa0/0xa4 refcount_t: addition on 0; use-after-free. Modules linked in: tpm_tis_spi tpm_tis_core tpm mdio_bcm_unimac brcmfmac sha256_generic libsha256 sha256_arm hci_uart btbcm bluetooth cfg80211 vc4 brcmutil ecdh_generic ecc snd_soc_core crc32_arm_ce libaes raspberrypi_hwmon ac97_bus snd_pcm_dmaengine bcm2711_thermal snd_pcm snd_timer genet snd phy_generic soundcore [last unloaded: spi_bcm2835] CPU: 3 PID: 1161 Comm: hold_open Not tainted 5.10.0ls-main-dirty #2 Hardware name: BCM2711 [<c0410c3c>] (unwind_backtrace) from [<c040b580>] (show_stack+0x10/0x14) [<c040b580>] (show_stack) from [<c1092174>] (dump_stack+0xc4/0xd8) [<c1092174>] (dump_stack) from [<c0445a30>] (__warn+0x104/0x108) [<c0445a30>] (__warn) from [<c0445aa8>] (warn_slowpath_fmt+0x74/0xb8) [<c0445aa8>] (warn_slowpath_fmt) from [<c08435d0>] (kobject_get+0xa0/0xa4) [<c08435d0>] (kobject_get) from [<bf0a715c>] (tpm_try_get_ops+0x14/0x54 [tpm]) [<bf0a715c>] (tpm_try_get_ops [tpm]) from [<bf0a7d6c>] (tpm_common_write+0x38/0x60 [tpm]) [<bf0a7d6c>] (tpm_common_write [tpm]) from [<c05a7ac0>] (vfs_write+0xc4/0x3c0) [<c05a7ac0>] (vfs_write) from [<c05a7ee4>] (ksys_write+0x58/0xcc) [<c05a7ee4>] (ksys_write) from [<c04001a0>] (ret_fast_syscall+0x0/0x4c) Exception stack(0xc226bfa8 to 0xc226bff0) bfa0: 00000000 000105b4 00000003 beafe664 00000014 00000000 bfc0: 00000000 000105b4 000103f8 00000004 00000000 00000000 b6f9c000 beafe684 bfe0: 0000006c beafe648 0001056c b6eb6944 ---[ end trace d4b8409def9b8b1f ]--- The reason for this warning is the attempt to get the chip->dev reference in tpm_common_write() although the reference counter is already zero. Since commit 8979b02aaf1d ("tpm: Fix reference count to main device") the extra reference used to prevent a premature zero counter is never taken, because the required TPM_CHIP_FLAG_TPM2 flag is never set. Fix this by moving the TPM 2 character device handling from tpm_chip_alloc() to tpm_add_char_device() which is called at a later point in time when the flag has been set in case of TPM2. Commit fdc915f7f719 ("tpm: expose spaces via a device link /dev/tpmrm<n>") already introduced function tpm_devs_release() to release the extra reference but did not implement the required put on chip->devs that results in the call of this function. Fix this by putting chip->devs in tpm_chip_unregister(). Finally move the new implementation for the TPM 2 handling into a new function to avoid multiple checks for the TPM_CHIP_FLAG_TPM2 flag in the good case and error cases. | ||||
| CVE-2022-49275 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: m_can: m_can_tx_handler(): fix use after free of skb can_put_echo_skb() will clone skb then free the skb. Move the can_put_echo_skb() for the m_can version 3.0.x directly before the start of the xmit in hardware, similar to the 3.1.x branch. | ||||
| CVE-2022-49238 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ath11k: free peer for station when disconnect from AP for QCA6390/WCN6855 Commit b4a0f54156ac ("ath11k: move peer delete after vdev stop of station for QCA6390 and WCN6855") is to fix firmware crash by changing the WMI command sequence, but actually skip all the peer delete operation, then it lead commit 58595c9874c6 ("ath11k: Fixing dangling pointer issue upon peer delete failure") not take effect, and then happened a use-after-free warning from KASAN. because the peer->sta is not set to NULL and then used later. Change to only skip the WMI_PEER_DELETE_CMDID for QCA6390/WCN6855. log of user-after-free: [ 534.888665] BUG: KASAN: use-after-free in ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888696] Read of size 8 at addr ffff8881396bb1b8 by task rtcwake/2860 [ 534.888705] CPU: 4 PID: 2860 Comm: rtcwake Kdump: loaded Tainted: G W 5.15.0-wt-ath+ #523 [ 534.888712] Hardware name: Intel(R) Client Systems NUC8i7HVK/NUC8i7HVB, BIOS HNKBLi70.86A.0067.2021.0528.1339 05/28/2021 [ 534.888716] Call Trace: [ 534.888720] <IRQ> [ 534.888726] dump_stack_lvl+0x57/0x7d [ 534.888736] print_address_description.constprop.0+0x1f/0x170 [ 534.888745] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888771] kasan_report.cold+0x83/0xdf [ 534.888783] ? ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888810] ath11k_dp_rx_update_peer_stats+0x912/0xc10 [ath11k] [ 534.888840] ath11k_dp_rx_process_mon_status+0x529/0xa70 [ath11k] [ 534.888874] ? ath11k_dp_rx_mon_status_bufs_replenish+0x3f0/0x3f0 [ath11k] [ 534.888897] ? check_prev_add+0x20f0/0x20f0 [ 534.888922] ? __lock_acquire+0xb72/0x1870 [ 534.888937] ? find_held_lock+0x33/0x110 [ 534.888954] ath11k_dp_rx_process_mon_rings+0x297/0x520 [ath11k] [ 534.888981] ? rcu_read_unlock+0x40/0x40 [ 534.888990] ? ath11k_dp_rx_pdev_alloc+0xd90/0xd90 [ath11k] [ 534.889026] ath11k_dp_service_mon_ring+0x67/0xe0 [ath11k] [ 534.889053] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889075] call_timer_fn+0x167/0x4a0 [ 534.889084] ? add_timer_on+0x3b0/0x3b0 [ 534.889103] ? lockdep_hardirqs_on_prepare.part.0+0x18c/0x370 [ 534.889117] __run_timers.part.0+0x539/0x8b0 [ 534.889123] ? ath11k_dp_rx_process_mon_rings+0x520/0x520 [ath11k] [ 534.889157] ? call_timer_fn+0x4a0/0x4a0 [ 534.889164] ? mark_lock_irq+0x1c30/0x1c30 [ 534.889173] ? clockevents_program_event+0xdd/0x280 [ 534.889189] ? mark_held_locks+0xa5/0xe0 [ 534.889203] run_timer_softirq+0x97/0x180 [ 534.889213] __do_softirq+0x276/0x86a [ 534.889230] __irq_exit_rcu+0x11c/0x180 [ 534.889238] irq_exit_rcu+0x5/0x20 [ 534.889244] sysvec_apic_timer_interrupt+0x8e/0xc0 [ 534.889251] </IRQ> [ 534.889254] <TASK> [ 534.889259] asm_sysvec_apic_timer_interrupt+0x12/0x20 [ 534.889265] RIP: 0010:_raw_spin_unlock_irqrestore+0x38/0x70 [ 534.889271] Code: 74 24 10 e8 ea c2 bf fd 48 89 ef e8 12 53 c0 fd 81 e3 00 02 00 00 75 25 9c 58 f6 c4 02 75 2d 48 85 db 74 01 fb bf 01 00 00 00 <e8> 13 a7 b5 fd 65 8b 05 cc d9 9c 5e 85 c0 74 0a 5b 5d c3 e8 a0 ee [ 534.889276] RSP: 0018:ffffc90002e5f880 EFLAGS: 00000206 [ 534.889284] RAX: 0000000000000006 RBX: 0000000000000200 RCX: ffffffff9f256f10 [ 534.889289] RDX: 0000000000000000 RSI: ffffffffa1c6e420 RDI: 0000000000000001 [ 534.889293] RBP: ffff8881095e6200 R08: 0000000000000001 R09: ffffffffa40d2b8f [ 534.889298] R10: fffffbfff481a571 R11: 0000000000000001 R12: ffff8881095e6e68 [ 534.889302] R13: ffffc90002e5f908 R14: 0000000000000246 R15: 0000000000000000 [ 534.889316] ? mark_lock+0xd0/0x14a0 [ 534.889332] klist_next+0x1d4/0x450 [ 534.889340] ? dpm_wait_for_subordinate+0x2d0/0x2d0 [ 534.889350] device_for_each_child+0xa8/0x140 [ 534.889360] ? device_remove_class_symlinks+0x1b0/0x1b0 [ 534.889370] ? __lock_release+0x4bd/0x9f0 [ 534.889378] ? dpm_suspend+0x26b/0x3f0 [ 534.889390] dpm_wait_for_subordinate+ ---truncated--- | ||||
| CVE-2022-49236 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix UAF due to race between btf_try_get_module and load_module While working on code to populate kfunc BTF ID sets for module BTF from its initcall, I noticed that by the time the initcall is invoked, the module BTF can already be seen by userspace (and the BPF verifier). The existing btf_try_get_module calls try_module_get which only fails if mod->state == MODULE_STATE_GOING, i.e. it can increment module reference when module initcall is happening in parallel. Currently, BTF parsing happens from MODULE_STATE_COMING notifier callback. At this point, the module initcalls have not been invoked. The notifier callback parses and prepares the module BTF, allocates an ID, which publishes it to userspace, and then adds it to the btf_modules list allowing the kernel to invoke btf_try_get_module for the BTF. However, at this point, the module has not been fully initialized (i.e. its initcalls have not finished). The code in module.c can still fail and free the module, without caring for other users. However, nothing stops btf_try_get_module from succeeding between the state transition from MODULE_STATE_COMING to MODULE_STATE_LIVE. This leads to a use-after-free issue when BPF program loads successfully in the state transition, load_module's do_init_module call fails and frees the module, and BPF program fd on close calls module_put for the freed module. Future patch has test case to verify we don't regress in this area in future. There are multiple points after prepare_coming_module (in load_module) where failure can occur and module loading can return error. We illustrate and test for the race using the last point where it can practically occur (in module __init function). An illustration of the race: CPU 0 CPU 1 load_module notifier_call(MODULE_STATE_COMING) btf_parse_module btf_alloc_id // Published to userspace list_add(&btf_mod->list, btf_modules) mod->init(...) ... ^ bpf_check | check_pseudo_btf_id | btf_try_get_module | returns true | ... ... | module __init in progress return prog_fd | ... ... V if (ret < 0) free_module(mod) ... close(prog_fd) ... bpf_prog_free_deferred module_put(used_btf.mod) // use-after-free We fix this issue by setting a flag BTF_MODULE_F_LIVE, from the notifier callback when MODULE_STATE_LIVE state is reached for the module, so that we return NULL from btf_try_get_module for modules that are not fully formed. Since try_module_get already checks that module is not in MODULE_STATE_GOING state, and that is the only transition a live module can make before being removed from btf_modules list, this is enough to close the race and prevent the bug. A later selftest patch crafts the race condition artifically to verify that it has been fixed, and that verifier fails to load program (with ENXIO). Lastly, a couple of comments: 1. Even if this race didn't exist, it seems more appropriate to only access resources (ksyms and kfuncs) of a fully formed module which has been initialized completely. 2. This patch was born out of need for synchronization against module initcall for the next patch, so it is needed for correctness even without the aforementioned race condition. The BTF resources initialized by module initcall are set up once and then only looked up, so just waiting until the initcall has finished ensures correct behavior. | ||||
| CVE-2022-49223 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cxl/port: Hold port reference until decoder release KASAN + DEBUG_KOBJECT_RELEASE reports a potential use-after-free in cxl_decoder_release() where it goes to reference its parent, a cxl_port, to free its id back to port->decoder_ida. BUG: KASAN: use-after-free in to_cxl_port+0x18/0x90 [cxl_core] Read of size 8 at addr ffff888119270908 by task kworker/35:2/379 CPU: 35 PID: 379 Comm: kworker/35:2 Tainted: G OE 5.17.0-rc2+ #198 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 Workqueue: events kobject_delayed_cleanup Call Trace: <TASK> dump_stack_lvl+0x59/0x73 print_address_description.constprop.0+0x1f/0x150 ? to_cxl_port+0x18/0x90 [cxl_core] kasan_report.cold+0x83/0xdf ? to_cxl_port+0x18/0x90 [cxl_core] to_cxl_port+0x18/0x90 [cxl_core] cxl_decoder_release+0x2a/0x60 [cxl_core] device_release+0x5f/0x100 kobject_cleanup+0x80/0x1c0 The device core only guarantees parent lifetime until all children are unregistered. If a child needs a parent to complete its ->release() callback that child needs to hold a reference to extend the lifetime of the parent. | ||||
| CVE-2022-49179 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: don't move oom_bfqq Our test report a UAF: [ 2073.019181] ================================================================== [ 2073.019188] BUG: KASAN: use-after-free in __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019191] Write of size 8 at addr ffff8000ccf64128 by task rmmod/72584 [ 2073.019192] [ 2073.019196] CPU: 0 PID: 72584 Comm: rmmod Kdump: loaded Not tainted 4.19.90-yk #5 [ 2073.019198] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2073.019200] Call trace: [ 2073.019203] dump_backtrace+0x0/0x310 [ 2073.019206] show_stack+0x28/0x38 [ 2073.019210] dump_stack+0xec/0x15c [ 2073.019216] print_address_description+0x68/0x2d0 [ 2073.019220] kasan_report+0x238/0x2f0 [ 2073.019224] __asan_store8+0x88/0xb0 [ 2073.019229] __bfq_put_async_bfqq+0xa0/0x168 [ 2073.019233] bfq_put_async_queues+0xbc/0x208 [ 2073.019236] bfq_pd_offline+0x178/0x238 [ 2073.019240] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019244] bfq_exit_queue+0x128/0x178 [ 2073.019249] blk_mq_exit_sched+0x12c/0x160 [ 2073.019252] elevator_exit+0xc8/0xd0 [ 2073.019256] blk_exit_queue+0x50/0x88 [ 2073.019259] blk_cleanup_queue+0x228/0x3d8 [ 2073.019267] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019274] null_exit+0x90/0x114 [null_blk] [ 2073.019278] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019282] el0_svc_common+0xc8/0x320 [ 2073.019287] el0_svc_handler+0xf8/0x160 [ 2073.019290] el0_svc+0x10/0x218 [ 2073.019291] [ 2073.019294] Allocated by task 14163: [ 2073.019301] kasan_kmalloc+0xe0/0x190 [ 2073.019305] kmem_cache_alloc_node_trace+0x1cc/0x418 [ 2073.019308] bfq_pd_alloc+0x54/0x118 [ 2073.019313] blkcg_activate_policy+0x250/0x460 [ 2073.019317] bfq_create_group_hierarchy+0x38/0x110 [ 2073.019321] bfq_init_queue+0x6d0/0x948 [ 2073.019325] blk_mq_init_sched+0x1d8/0x390 [ 2073.019330] elevator_switch_mq+0x88/0x170 [ 2073.019334] elevator_switch+0x140/0x270 [ 2073.019338] elv_iosched_store+0x1a4/0x2a0 [ 2073.019342] queue_attr_store+0x90/0xe0 [ 2073.019348] sysfs_kf_write+0xa8/0xe8 [ 2073.019351] kernfs_fop_write+0x1f8/0x378 [ 2073.019359] __vfs_write+0xe0/0x360 [ 2073.019363] vfs_write+0xf0/0x270 [ 2073.019367] ksys_write+0xdc/0x1b8 [ 2073.019371] __arm64_sys_write+0x50/0x60 [ 2073.019375] el0_svc_common+0xc8/0x320 [ 2073.019380] el0_svc_handler+0xf8/0x160 [ 2073.019383] el0_svc+0x10/0x218 [ 2073.019385] [ 2073.019387] Freed by task 72584: [ 2073.019391] __kasan_slab_free+0x120/0x228 [ 2073.019394] kasan_slab_free+0x10/0x18 [ 2073.019397] kfree+0x94/0x368 [ 2073.019400] bfqg_put+0x64/0xb0 [ 2073.019404] bfqg_and_blkg_put+0x90/0xb0 [ 2073.019408] bfq_put_queue+0x220/0x228 [ 2073.019413] __bfq_put_async_bfqq+0x98/0x168 [ 2073.019416] bfq_put_async_queues+0xbc/0x208 [ 2073.019420] bfq_pd_offline+0x178/0x238 [ 2073.019424] blkcg_deactivate_policy+0x1f0/0x420 [ 2073.019429] bfq_exit_queue+0x128/0x178 [ 2073.019433] blk_mq_exit_sched+0x12c/0x160 [ 2073.019437] elevator_exit+0xc8/0xd0 [ 2073.019440] blk_exit_queue+0x50/0x88 [ 2073.019443] blk_cleanup_queue+0x228/0x3d8 [ 2073.019451] null_del_dev+0xfc/0x1e0 [null_blk] [ 2073.019459] null_exit+0x90/0x114 [null_blk] [ 2073.019462] __arm64_sys_delete_module+0x358/0x5a0 [ 2073.019467] el0_svc_common+0xc8/0x320 [ 2073.019471] el0_svc_handler+0xf8/0x160 [ 2073.019474] el0_svc+0x10/0x218 [ 2073.019475] [ 2073.019479] The buggy address belongs to the object at ffff8000ccf63f00 which belongs to the cache kmalloc-1024 of size 1024 [ 2073.019484] The buggy address is located 552 bytes inside of 1024-byte region [ffff8000ccf63f00, ffff8000ccf64300) [ 2073.019486] The buggy address belongs to the page: [ 2073.019492] page:ffff7e000333d800 count:1 mapcount:0 mapping:ffff8000c0003a00 index:0x0 compound_mapcount: 0 [ 2073.020123] flags: 0x7ffff0000008100(slab|head) [ 2073.020403] raw: 07ffff0000008100 ffff7e0003334c08 ffff7e00001f5a08 ffff8000c0003a00 [ 2073.020409] ra ---truncated--- | ||||
| CVE-2022-49136 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Fix queuing commands when HCI_UNREGISTER is set hci_cmd_sync_queue shall return an error if HCI_UNREGISTER flag has been set as that means hci_unregister_dev has been called so it will likely cause a uaf after the timeout as the hdev will be freed. | ||||
| CVE-2022-49129 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mt76: mt7921: fix crash when startup fails. If the nic fails to start, it is possible that the reset_work has already been scheduled. Ensure the work item is canceled so we do not have use-after-free crash in case cleanup is called before the work item is executed. This fixes crash on my x86_64 apu2 when mt7921k radio fails to work. Radio still fails, but OS does not crash. | ||||
| CVE-2022-49111 | 2 Linux, Redhat | 5 Linux Kernel, Enterprise Linux, Rhel Aus and 2 more | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix use after free in hci_send_acl This fixes the following trace caused by receiving HCI_EV_DISCONN_PHY_LINK_COMPLETE which does call hci_conn_del without first checking if conn->type is in fact AMP_LINK and in case it is do properly cleanup upper layers with hci_disconn_cfm: ================================================================== BUG: KASAN: use-after-free in hci_send_acl+0xaba/0xc50 Read of size 8 at addr ffff88800e404818 by task bluetoothd/142 CPU: 0 PID: 142 Comm: bluetoothd Not tainted 5.17.0-rc5-00006-gda4022eeac1a #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x45/0x59 print_address_description.constprop.0+0x1f/0x150 kasan_report.cold+0x7f/0x11b hci_send_acl+0xaba/0xc50 l2cap_do_send+0x23f/0x3d0 l2cap_chan_send+0xc06/0x2cc0 l2cap_sock_sendmsg+0x201/0x2b0 sock_sendmsg+0xdc/0x110 sock_write_iter+0x20f/0x370 do_iter_readv_writev+0x343/0x690 do_iter_write+0x132/0x640 vfs_writev+0x198/0x570 do_writev+0x202/0x280 do_syscall_64+0x38/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae RSP: 002b:00007ffce8a099b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 Code: 0f 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 14 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RDX: 0000000000000001 RSI: 00007ffce8a099e0 RDI: 0000000000000015 RAX: ffffffffffffffda RBX: 00007ffce8a099e0 RCX: 00007f788fc3cf77 R10: 00007ffce8af7080 R11: 0000000000000246 R12: 000055e4ccf75580 RBP: 0000000000000015 R08: 0000000000000002 R09: 0000000000000001 </TASK> R13: 000055e4ccf754a0 R14: 000055e4ccf75cd0 R15: 000055e4ccf4a6b0 Allocated by task 45: kasan_save_stack+0x1e/0x40 __kasan_kmalloc+0x81/0xa0 hci_chan_create+0x9a/0x2f0 l2cap_conn_add.part.0+0x1a/0xdc0 l2cap_connect_cfm+0x236/0x1000 le_conn_complete_evt+0x15a7/0x1db0 hci_le_conn_complete_evt+0x226/0x2c0 hci_le_meta_evt+0x247/0x450 hci_event_packet+0x61b/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 Freed by task 45: kasan_save_stack+0x1e/0x40 kasan_set_track+0x21/0x30 kasan_set_free_info+0x20/0x30 __kasan_slab_free+0xfb/0x130 kfree+0xac/0x350 hci_conn_cleanup+0x101/0x6a0 hci_conn_del+0x27e/0x6c0 hci_disconn_phylink_complete_evt+0xe0/0x120 hci_event_packet+0x812/0xe90 hci_rx_work+0x4d5/0xc50 process_one_work+0x8fb/0x15a0 worker_thread+0x576/0x1240 kthread+0x29d/0x340 ret_from_fork+0x1f/0x30 The buggy address belongs to the object at ffff88800c0f0500 The buggy address is located 24 bytes inside of which belongs to the cache kmalloc-128 of size 128 The buggy address belongs to the page: 128-byte region [ffff88800c0f0500, ffff88800c0f0580) flags: 0x100000000000200(slab|node=0|zone=1) page:00000000fe45cd86 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0xc0f0 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 raw: 0100000000000200 ffffea00003a2c80 dead000000000004 ffff8880078418c0 page dumped because: kasan: bad access detected ffff88800c0f0400: 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc Memory state around the buggy address: >ffff88800c0f0500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800c0f0480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800c0f0580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ---truncated--- | ||||