Filtered by vendor Juniper
Subscriptions
Total
918 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-30405 | 1 Juniper | 4 Junos, Srx5400, Srx5600 and 1 more | 2025-04-10 | 7.5 High |
| An Incorrect Calculation of Buffer Size vulnerability in Juniper Networks Junos OS SRX 5000 Series devices using SPC2 line cards while ALGs are enabled allows an attacker sending specific crafted packets to cause a transit traffic Denial of Service (DoS). Continued receipt and processing of these specific packets will sustain the Denial of Service condition. This issue affects: Juniper Networks Junos OS SRX 5000 Series with SPC2 with ALGs enabled. * All versions earlier than 21.2R3-S7; * 21.4 versions earlier than 21.4R3-S6; * 22.1 versions earlier than 22.1R3-S5; * 22.2 versions earlier than 22.2R3-S3; * 22.3 versions earlier than 22.3R3-S2; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R2. | ||||
| CVE-2024-21609 | 1 Juniper | 38 Csrx, Junos, Mx240 and 35 more | 2025-04-10 | 6.5 Medium |
| A Missing Release of Memory after Effective Lifetime vulnerability in the IKE daemon (iked) of Juniper Networks Junos OS on MX Series with SPC3, and SRX Series allows an administratively adjacent attacker which is able to successfully establish IPsec tunnels to cause a Denial of Service (DoS). If specific values for the IPsec parameters local-ip, remote-ip, remote ike-id, and traffic selectors are sent from the peer, a memory leak occurs during every IPsec SA rekey which is carried out with a specific message sequence. This will eventually result in an iked process crash and restart. The iked process memory consumption can be checked using the below command: user@host> show system processes extensive | grep iked PID USERNAME PRI NICE SIZE RES STATE C TIME WCPU COMMAND 56903 root 31 0 4016M 2543M CPU0 0 2:10 10.50% iked This issue affects Juniper Networks Junos OS: * All versions earlier than 20.4R3-S9; * 21.2 versions earlier than 21.2R3-S7; * 21.3 versions earlier than 21.3R3-S5; * 21.4 versions earlier than 21.4R3-S4; * 22.1 versions earlier than 22.1R3-S3; * 22.2 versions earlier than 22.2R3-S2; * 22.3 versions earlier than 22.3R3; * 22.4 versions earlier than 22.4R3; * 23.2 versions earlier than 23.2R1-S2, 23.2R2. | ||||
| CVE-2024-39561 | 1 Juniper | 6 Junos, Srx4600, Srx5000 and 3 more | 2025-04-10 | 5.8 Medium |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the flow daemon (flowd) of Juniper Networks Junos OS on SRX4600 and SRX5000 Series allows an attacker to send TCP packets with SYN/FIN or SYN/RST flags, bypassing the expected blocking of these packets. A TCP packet with SYN/FIN or SYN/RST should be dropped in flowd. However, when no-syn-check and Express Path are enabled, these TCP packets are unexpectedly transferred to the downstream network. This issue affects Junos OS on SRX4600 and SRX5000 Series: * All versions before 21.2R3-S8, * from 21.4 before 21.4R3-S7, * from 22.1 before 22.1R3-S6, * from 22.2 before 22.2R3-S4, * from 22.3 before 22.3R3-S3, * from 22.4 before 22.4R3-S2, * from 23.2 before 23.2R2, * from 23.4 before 23.4R1-S1, 23.4R2. | ||||
| CVE-2009-3487 | 1 Juniper | 1 Junos | 2025-04-09 | N/A |
| Multiple cross-site scripting (XSS) vulnerabilities in the J-Web interface in Juniper JUNOS 8.5R1.14 allow remote authenticated users to inject arbitrary web script or HTML via (1) the JEXEC_OUTID parameter in a JEXEC_MODE_RELAY_OUTPUT action to the jexec program; the (2) act, (3) refresh-time, or (4) ifid parameter to scripter.php; (5) the revision parameter in a rollback action to the configuration program; the m[] parameter to the (6) monitor, (7) manage, (8) events, (9) configuration, or (10) alarms program; (11) the m[] parameter to the default URI; (12) the m[] parameter in a browse action to the default URI; (13) the wizard-next parameter in an https action to the configuration program; or the (14) Contact Information, (15) System Description, (16) Local Engine ID, (17) System Location, or (18) System Name Override SNMP parameter, related to the configuration program. | ||||
| CVE-2008-1181 | 1 Juniper | 1 Secure Access 2000 | 2025-04-09 | N/A |
| Juniper Networks Secure Access 2000 5.5 R1 (build 11711) allows remote attackers to obtain sensitive information via a direct request for remediate.cgi without certain parameters, which reveals the path in an "Execute failed" error message. | ||||
| CVE-2009-0115 | 9 Avaya, Christophe.varoqui, Debian and 6 more | 12 Intuity Audix Lx, Message Networking, Messaging Storage Server and 9 more | 2025-04-09 | 7.8 High |
| The Device Mapper multipathing driver (aka multipath-tools or device-mapper-multipath) 0.4.8, as used in SUSE openSUSE, SUSE Linux Enterprise Server (SLES), Fedora, and possibly other operating systems, uses world-writable permissions for the socket file (aka /var/run/multipathd.sock), which allows local users to send arbitrary commands to the multipath daemon. | ||||
| CVE-2008-1180 | 1 Juniper | 1 Secure Access 2000 | 2025-04-09 | N/A |
| Cross-site scripting (XSS) vulnerability in dana-na/auth/rdremediate.cgi in Juniper Networks Secure Access 2000 5.5 R1 build 11711 allows remote attackers to inject arbitrary web script or HTML via the delivery_mode parameter. | ||||
| CVE-2009-3486 | 1 Juniper | 1 Junos | 2025-04-09 | N/A |
| Multiple cross-site scripting (XSS) vulnerabilities in the J-Web interface in Juniper JUNOS 8.5R1.14 allow remote authenticated users to inject arbitrary web script or HTML via the host parameter to (1) the pinghost program, reachable through the diagnose program; or (2) the traceroute program, reachable through the diagnose program; or (3) the probe-limit parameter to the configuration program; the (4) wizard-ids or (5) pager-new-identifier parameter in a firewall-filters action to the configuration program; (6) the cos-physical-interface-name parameter in a cos-physical-interfaces-edit action to the configuration program; the (7) wizard-args or (8) wizard-ids parameter in an snmp action to the configuration program; the (9) username or (10) fullname parameter in a users action to the configuration program; or the (11) certname or (12) certbody parameter in a local-cert (aka https) action to the configuration program. | ||||
| CVE-2009-3485 | 1 Juniper | 1 Junos | 2025-04-09 | N/A |
| Cross-site scripting (XSS) vulnerability in the J-Web interface in Juniper JUNOS 8.5R1.14 and 9.0R1.1 allows remote attackers to inject arbitrary web script or HTML via the PATH_INFO to the default URI. | ||||
| CVE-2008-6096 | 1 Juniper | 1 Netscreen Screenos | 2025-04-09 | N/A |
| Cross-site scripting (XSS) vulnerability in Juniper NetScreen ScreenOS before 5.4r10, 6.0r6, and 6.1r2 allows remote attackers to inject arbitrary web script or HTML via the user name parameter to the (1) web interface login page or the (2) telnet login page. | ||||
| CVE-2009-1185 | 8 Canonical, Debian, Fedoraproject and 5 more | 10 Ubuntu Linux, Debian Linux, Fedora and 7 more | 2025-04-09 | N/A |
| udev before 1.4.1 does not verify whether a NETLINK message originates from kernel space, which allows local users to gain privileges by sending a NETLINK message from user space. | ||||
| CVE-2007-6372 | 1 Juniper | 1 Junos | 2025-04-09 | N/A |
| Unspecified vulnerability in Juniper JUNOS 7.3 through 8.4 allows remote attackers to cause a denial of service (crash) via malformed BGP packets, possibly BGP UPDATE packets that trigger session flapping. | ||||
| CVE-2007-5560 | 1 Juniper | 1 Http Service | 2025-04-09 | N/A |
| Heap-based buffer overflow in the Juniper HTTP Service allows remote attackers to execute arbitrary code via a crafted HTTP packet. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes. | ||||
| CVE-2008-2476 | 6 Force10, Freebsd, Juniper and 3 more | 6 Ftos, Freebsd, Jnos and 3 more | 2025-04-09 | N/A |
| The IPv6 Neighbor Discovery Protocol (NDP) implementation in (1) FreeBSD 6.3 through 7.1, (2) OpenBSD 4.2 and 4.3, (3) NetBSD, (4) Force10 FTOS before E7.7.1.1, (5) Juniper JUNOS, and (6) Wind River VxWorks 5.x through 6.4 does not validate the origin of Neighbor Discovery messages, which allows remote attackers to cause a denial of service (loss of connectivity) or read private network traffic via a spoofed message that modifies the Forward Information Base (FIB). | ||||
| CVE-2008-0960 | 7 Cisco, Ecos Sourceware, Ingate and 4 more | 27 Ace 10 6504 Bundle With 4 Gbps Throughput, Ace 10 6509 Bundle With 8 Gbps Throughput, Ace 10 Service Module and 24 more | 2025-04-09 | N/A |
| SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte. | ||||
| CVE-2023-22416 | 1 Juniper | 46 Junos, Mx10, Mx10000 and 43 more | 2025-04-08 | 7.5 High |
| A Buffer Overflow vulnerability in SIP ALG of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). On all MX Series and SRX Series platform with SIP ALG enabled, when a malformed SIP packet is received, the flow processing daemon (flowd) will crash and restart. This issue affects: Juniper Networks Junos OS on MX Series and SRX Series 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S2; 21.3 versions prior to 21.3R3-S1; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R1-S2, 22.1R2; 22.2 versions prior to 22.2R1-S1, 22.2R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.4R1 on SRX Series. | ||||
| CVE-2023-22417 | 1 Juniper | 29 Junos, Srx100, Srx110 and 26 more | 2025-04-08 | 7.5 High |
| A Missing Release of Memory after Effective Lifetime vulnerability in the Flow Processing Daemon (flowd) of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). In an IPsec VPN environment, a memory leak will be seen if a DH or ECDH group is configured. Eventually the flowd process will crash and restart. This issue affects Juniper Networks Junos OS on SRX Series: All versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R2-S8, 19.4R3-S10; 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S5; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2. | ||||
| CVE-2023-22402 | 1 Juniper | 1 Junos Os Evolved | 2025-04-07 | 5.9 Medium |
| A Use After Free vulnerability in the kernel of Juniper Networks Junos OS Evolved allows an unauthenticated, network-based attacker to cause a Denial of Service (DoS). In a Non Stop Routing (NSR) scenario, an unexpected kernel restart might be observed if "bgp auto-discovery" is enabled and if there is a BGP neighbor flap of auto-discovery sessions for any reason. This is a race condition which is outside of an attackers direct control and it depends on system internal timing whether this issue occurs. This issue affects Juniper Networks Junos OS Evolved: 21.3 versions prior to 21.3R3-EVO; 21.4 versions prior to 21.4R2-EVO; 22.1 versions prior to 22.1R2-EVO; 22.2 versions prior to 22.2R1-S1-EVO, 22.2R2-EVO. | ||||
| CVE-2023-22403 | 1 Juniper | 4 Junos, Qfx10002, Qfx10008 and 1 more | 2025-04-07 | 7.5 High |
| An Allocation of Resources Without Limits or Throttling vulnerability in the Packet Forwarding Engine (PFE) of Juniper Networks Junos OS allows a network-based, unauthenticated attacker to cause a Denial of Service (DoS). On QFX10K Series, Inter-Chassis Control Protocol (ICCP) is used in MC-LAG topologies to exchange control information between the devices in the topology. ICCP connection flaps and sync issues will be observed due to excessive specific traffic to the local device. This issue affects Juniper Networks Junos OS on QFX10K Series: * All versions prior to 20.2R3-S7; * 20.4 versions prior to 20.4R3-S4; * 21.1 versions prior to 21.1R3-S3; * 21.2 versions prior to 21.2R3-S1; * 21.3 versions prior to 21.3R3; * 21.4 versions prior to 21.4R3; * 22.1 versions prior to 22.1R2. | ||||
| CVE-2023-22414 | 1 Juniper | 8 Junos, Qfx10000, Qfx10002 and 5 more | 2025-04-07 | 6.5 Medium |
| A Missing Release of Memory after Effective Lifetime vulnerability in Flexible PIC Concentrator (FPC) of Juniper Networks Junos OS allows an adjacent, unauthenticated attacker from the same shared physical or logical network, to cause a heap memory leak and leading to FPC crash. On all Junos PTX Series and QFX10000 Series, when specific EVPN VXLAN Multicast packets are processed, an FPC heap memory leak is observed. The FPC memory usage can be monitored using the CLI command "show heap extensive". Following is an example output. ID Base Total(b) Free(b) Used(b) % Name Peak used % -- -------- --------- --------- --------- --- ----------- ----------- 0 37dcf000 3221225472 1694526368 1526699104 47 Kernel 47 1 17dcf000 1048576 1048576 0 0 TOE DMA 0 2 17ecf000 1048576 1048576 0 0 DMA 0 3 17fcf000 534773760 280968336 253805424 47 Packet DMA 47 This issue affects: Juniper Networks Junos OS PTX Series and QFX10000 Series 20.2 versions prior to 20.2R3-S6; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S4; 21.1 versions prior to 21.1R3-S3; 21.2 versions prior to 21.2R3-S1; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R3; 22.1 versions prior to 22.1R2; 22.2 versions prior to 22.2R2. This issue does not affect Juniper Networks Junos OS versions prior to 20.1R1 on PTX Series and QFX10000 Series. | ||||