Filtered by vendor Redhat
Subscriptions
Filtered by product Enterprise Linux
Subscriptions
Total
15515 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2024-26643 | 3 Debian, Linux, Redhat | 4 Debian Linux, Linux Kernel, Enterprise Linux and 1 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: mark set as dead when unbinding anonymous set with timeout While the rhashtable set gc runs asynchronously, a race allows it to collect elements from anonymous sets with timeouts while it is being released from the commit path. Mingi Cho originally reported this issue in a different path in 6.1.x with a pipapo set with low timeouts which is not possible upstream since 7395dfacfff6 ("netfilter: nf_tables: use timestamp to check for set element timeout"). Fix this by setting on the dead flag for anonymous sets to skip async gc in this case. According to 08e4c8c5919f ("netfilter: nf_tables: mark newset as dead on transaction abort"), Florian plans to accelerate abort path by releasing objects via workqueue, therefore, this sets on the dead flag for abort path too. | ||||
| CVE-2024-26633 | 4 Debian, Linux, Netapp and 1 more | 37 Debian Linux, Linux Kernel, 9500 and 34 more | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ip6_tunnel: fix NEXTHDR_FRAGMENT handling in ip6_tnl_parse_tlv_enc_lim() syzbot pointed out [1] that NEXTHDR_FRAGMENT handling is broken. Reading frag_off can only be done if we pulled enough bytes to skb->head. Currently we might access garbage. [1] BUG: KMSAN: uninit-value in ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0 ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0 ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline] ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137 ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:451 [inline] ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155 ip6_send_skb net/ipv6/ip6_output.c:1952 [inline] ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972 rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582 rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920 inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] __kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517 __do_kmalloc_node mm/slab_common.c:1006 [inline] __kmalloc_node_track_caller+0x118/0x3c0 mm/slab_common.c:1027 kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582 pskb_expand_head+0x226/0x1a00 net/core/skbuff.c:2098 __pskb_pull_tail+0x13b/0x2310 net/core/skbuff.c:2655 pskb_may_pull_reason include/linux/skbuff.h:2673 [inline] pskb_may_pull include/linux/skbuff.h:2681 [inline] ip6_tnl_parse_tlv_enc_lim+0x901/0xbb0 net/ipv6/ip6_tunnel.c:408 ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline] ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137 ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:451 [inline] ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155 ip6_send_skb net/ipv6/ip6_output.c:1952 [inline] ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972 rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582 rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920 inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendms ---truncated--- | ||||
| CVE-2024-26629 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: fix RELEASE_LOCKOWNER The test on so_count in nfsd4_release_lockowner() is nonsense and harmful. Revert to using check_for_locks(), changing that to not sleep. First: harmful. As is documented in the kdoc comment for nfsd4_release_lockowner(), the test on so_count can transiently return a false positive resulting in a return of NFS4ERR_LOCKS_HELD when in fact no locks are held. This is clearly a protocol violation and with the Linux NFS client it can cause incorrect behaviour. If RELEASE_LOCKOWNER is sent while some other thread is still processing a LOCK request which failed because, at the time that request was received, the given owner held a conflicting lock, then the nfsd thread processing that LOCK request can hold a reference (conflock) to the lock owner that causes nfsd4_release_lockowner() to return an incorrect error. The Linux NFS client ignores that NFS4ERR_LOCKS_HELD error because it never sends NFS4_RELEASE_LOCKOWNER without first releasing any locks, so it knows that the error is impossible. It assumes the lock owner was in fact released so it feels free to use the same lock owner identifier in some later locking request. When it does reuse a lock owner identifier for which a previous RELEASE failed, it will naturally use a lock_seqid of zero. However the server, which didn't release the lock owner, will expect a larger lock_seqid and so will respond with NFS4ERR_BAD_SEQID. So clearly it is harmful to allow a false positive, which testing so_count allows. The test is nonsense because ... well... it doesn't mean anything. so_count is the sum of three different counts. 1/ the set of states listed on so_stateids 2/ the set of active vfs locks owned by any of those states 3/ various transient counts such as for conflicting locks. When it is tested against '2' it is clear that one of these is the transient reference obtained by find_lockowner_str_locked(). It is not clear what the other one is expected to be. In practice, the count is often 2 because there is precisely one state on so_stateids. If there were more, this would fail. In my testing I see two circumstances when RELEASE_LOCKOWNER is called. In one case, CLOSE is called before RELEASE_LOCKOWNER. That results in all the lock states being removed, and so the lockowner being discarded (it is removed when there are no more references which usually happens when the lock state is discarded). When nfsd4_release_lockowner() finds that the lock owner doesn't exist, it returns success. The other case shows an so_count of '2' and precisely one state listed in so_stateid. It appears that the Linux client uses a separate lock owner for each file resulting in one lock state per lock owner, so this test on '2' is safe. For another client it might not be safe. So this patch changes check_for_locks() to use the (newish) find_any_file_locked() so that it doesn't take a reference on the nfs4_file and so never calls nfsd_file_put(), and so never sleeps. With this check is it safe to restore the use of check_for_locks() rather than testing so_count against the mysterious '2'. | ||||
| CVE-2024-26605 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI/ASPM: Fix deadlock when enabling ASPM A last minute revert in 6.7-final introduced a potential deadlock when enabling ASPM during probe of Qualcomm PCIe controllers as reported by lockdep: ============================================ WARNING: possible recursive locking detected 6.7.0 #40 Not tainted -------------------------------------------- kworker/u16:5/90 is trying to acquire lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc but task is already holding lock: ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(pci_bus_sem); lock(pci_bus_sem); *** DEADLOCK *** Call trace: print_deadlock_bug+0x25c/0x348 __lock_acquire+0x10a4/0x2064 lock_acquire+0x1e8/0x318 down_read+0x60/0x184 pcie_aspm_pm_state_change+0x58/0xdc pci_set_full_power_state+0xa8/0x114 pci_set_power_state+0xc4/0x120 qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom] pci_walk_bus+0x64/0xbc qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom] The deadlock can easily be reproduced on machines like the Lenovo ThinkPad X13s by adding a delay to increase the race window during asynchronous probe where another thread can take a write lock. Add a new pci_set_power_state_locked() and associated helper functions that can be called with the PCI bus semaphore held to avoid taking the read lock twice. | ||||
| CVE-2023-53024 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 5.6 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix pointer-leak due to insufficient speculative store bypass mitigation To mitigate Spectre v4, 2039f26f3aca ("bpf: Fix leakage due to insufficient speculative store bypass mitigation") inserts lfence instructions after 1) initializing a stack slot and 2) spilling a pointer to the stack. However, this does not cover cases where a stack slot is first initialized with a pointer (subject to sanitization) but then overwritten with a scalar (not subject to sanitization because the slot was already initialized). In this case, the second write may be subject to speculative store bypass (SSB) creating a speculative pointer-as-scalar type confusion. This allows the program to subsequently leak the numerical pointer value using, for example, a branch-based cache side channel. To fix this, also sanitize scalars if they write a stack slot that previously contained a pointer. Assuming that pointer-spills are only generated by LLVM on register-pressure, the performance impact on most real-world BPF programs should be small. The following unprivileged BPF bytecode drafts a minimal exploit and the mitigation: [...] // r6 = 0 or 1 (skalar, unknown user input) // r7 = accessible ptr for side channel // r10 = frame pointer (fp), to be leaked // r9 = r10 # fp alias to encourage ssb *(u64 *)(r9 - 8) = r10 // fp[-8] = ptr, to be leaked // lfence added here because of pointer spill to stack. // // Ommitted: Dummy bpf_ringbuf_output() here to train alias predictor // for no r9-r10 dependency. // *(u64 *)(r10 - 8) = r6 // fp[-8] = scalar, overwrites ptr // 2039f26f3aca: no lfence added because stack slot was not STACK_INVALID, // store may be subject to SSB // // fix: also add an lfence when the slot contained a ptr // r8 = *(u64 *)(r9 - 8) // r8 = architecturally a scalar, speculatively a ptr // // leak ptr using branch-based cache side channel: r8 &= 1 // choose bit to leak if r8 == 0 goto SLOW // no mispredict // architecturally dead code if input r6 is 0, // only executes speculatively iff ptr bit is 1 r8 = *(u64 *)(r7 + 0) # encode bit in cache (0: slow, 1: fast) SLOW: [...] After running this, the program can time the access to *(r7 + 0) to determine whether the chosen pointer bit was 0 or 1. Repeat this 64 times to recover the whole address on amd64. In summary, sanitization can only be skipped if one scalar is overwritten with another scalar. Scalar-confusion due to speculative store bypass can not lead to invalid accesses because the pointer bounds deducted during verification are enforced using branchless logic. See 979d63d50c0c ("bpf: prevent out of bounds speculation on pointer arithmetic") for details. Do not make the mitigation depend on !env->allow_{uninit_stack,ptr_leaks} because speculative leaks are likely unexpected if these were enabled. For example, leaking the address to a protected log file may be acceptable while disabling the mitigation might unintentionally leak the address into the cached-state of a map that is accessible to unprivileged processes. | ||||
| CVE-2023-52999 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: fix UaF in netns ops registration error path If net_assign_generic() fails, the current error path in ops_init() tries to clear the gen pointer slot. Anyway, in such error path, the gen pointer itself has not been modified yet, and the existing and accessed one is smaller than the accessed index, causing an out-of-bounds error: BUG: KASAN: slab-out-of-bounds in ops_init+0x2de/0x320 Write of size 8 at addr ffff888109124978 by task modprobe/1018 CPU: 2 PID: 1018 Comm: modprobe Not tainted 6.2.0-rc2.mptcp_ae5ac65fbed5+ #1641 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x6a/0x9f print_address_description.constprop.0+0x86/0x2b5 print_report+0x11b/0x1fb kasan_report+0x87/0xc0 ops_init+0x2de/0x320 register_pernet_operations+0x2e4/0x750 register_pernet_subsys+0x24/0x40 tcf_register_action+0x9f/0x560 do_one_initcall+0xf9/0x570 do_init_module+0x190/0x650 load_module+0x1fa5/0x23c0 __do_sys_finit_module+0x10d/0x1b0 do_syscall_64+0x58/0x80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f42518f778d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d cb 56 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007fff96869688 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 00005568ef7f7c90 RCX: 00007f42518f778d RDX: 0000000000000000 RSI: 00005568ef41d796 RDI: 0000000000000003 RBP: 00005568ef41d796 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005568ef7f7d30 R14: 0000000000040000 R15: 0000000000000000 </TASK> This change addresses the issue by skipping the gen pointer de-reference in the mentioned error-path. Found by code inspection and verified with explicit error injection on a kasan-enabled kernel. | ||||
| CVE-2023-52626 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix operation precedence bug in port timestamping napi_poll context Indirection (*) is of lower precedence than postfix increment (++). Logic in napi_poll context would cause an out-of-bound read by first increment the pointer address by byte address space and then dereference the value. Rather, the intended logic was to dereference first and then increment the underlying value. | ||||
| CVE-2023-52581 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_tables: fix memleak when more than 255 elements expired When more than 255 elements expired we're supposed to switch to a new gc container structure. This never happens: u8 type will wrap before reaching the boundary and nft_trans_gc_space() always returns true. This means we recycle the initial gc container structure and lose track of the elements that came before. While at it, don't deref 'gc' after we've passed it to call_rcu. | ||||
| CVE-2023-52565 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: media: uvcvideo: Fix OOB read If the index provided by the user is bigger than the mask size, we might do an out of bound read. | ||||
| CVE-2023-52562 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mm/slab_common: fix slab_caches list corruption after kmem_cache_destroy() After the commit in Fixes:, if a module that created a slab cache does not release all of its allocated objects before destroying the cache (at rmmod time), we might end up releasing the kmem_cache object without removing it from the slab_caches list thus corrupting the list as kmem_cache_destroy() ignores the return value from shutdown_cache(), which in turn never removes the kmem_cache object from slabs_list in case __kmem_cache_shutdown() fails to release all of the cache's slabs. This is easily observable on a kernel built with CONFIG_DEBUG_LIST=y as after that ill release the system will immediately trip on list_add, or list_del, assertions similar to the one shown below as soon as another kmem_cache gets created, or destroyed: [ 1041.213632] list_del corruption. next->prev should be ffff89f596fb5768, but was 52f1e5016aeee75d. (next=ffff89f595a1b268) [ 1041.219165] ------------[ cut here ]------------ [ 1041.221517] kernel BUG at lib/list_debug.c:62! [ 1041.223452] invalid opcode: 0000 [#1] PREEMPT SMP PTI [ 1041.225408] CPU: 2 PID: 1852 Comm: rmmod Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 1041.228244] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 1041.231212] RIP: 0010:__list_del_entry_valid+0xae/0xb0 Another quick way to trigger this issue, in a kernel with CONFIG_SLUB=y, is to set slub_debug to poison the released objects and then just run cat /proc/slabinfo after removing the module that leaks slab objects, in which case the kernel will panic: [ 50.954843] general protection fault, probably for non-canonical address 0xa56b6b6b6b6b6b8b: 0000 [#1] PREEMPT SMP PTI [ 50.961545] CPU: 2 PID: 1495 Comm: cat Kdump: loaded Tainted: G B W OE 6.5.0 #15 [ 50.966808] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS edk2-20230524-3.fc37 05/24/2023 [ 50.972663] RIP: 0010:get_slabinfo+0x42/0xf0 This patch fixes this issue by properly checking shutdown_cache()'s return value before taking the kmem_cache_release() branch. | ||||
| CVE-2023-52463 | 2 Linux, Redhat | 3 Linux Kernel, Enterprise Linux, Rhel Eus | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: efivarfs: force RO when remounting if SetVariable is not supported If SetVariable at runtime is not supported by the firmware we never assign a callback for that function. At the same time mount the efivarfs as RO so no one can call that. However, we never check the permission flags when someone remounts the filesystem as RW. As a result this leads to a crash looking like this: $ mount -o remount,rw /sys/firmware/efi/efivars $ efi-updatevar -f PK.auth PK [ 303.279166] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 303.280482] Mem abort info: [ 303.280854] ESR = 0x0000000086000004 [ 303.281338] EC = 0x21: IABT (current EL), IL = 32 bits [ 303.282016] SET = 0, FnV = 0 [ 303.282414] EA = 0, S1PTW = 0 [ 303.282821] FSC = 0x04: level 0 translation fault [ 303.283771] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004258c000 [ 303.284913] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 303.286076] Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP [ 303.286936] Modules linked in: qrtr tpm_tis tpm_tis_core crct10dif_ce arm_smccc_trng rng_core drm fuse ip_tables x_tables ipv6 [ 303.288586] CPU: 1 PID: 755 Comm: efi-updatevar Not tainted 6.3.0-rc1-00108-gc7d0c4695c68 #1 [ 303.289748] Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.04-00627-g88336918701d 04/01/2023 [ 303.291150] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 303.292123] pc : 0x0 [ 303.292443] lr : efivar_set_variable_locked+0x74/0xec [ 303.293156] sp : ffff800008673c10 [ 303.293619] x29: ffff800008673c10 x28: ffff0000037e8000 x27: 0000000000000000 [ 303.294592] x26: 0000000000000800 x25: ffff000002467400 x24: 0000000000000027 [ 303.295572] x23: ffffd49ea9832000 x22: ffff0000020c9800 x21: ffff000002467000 [ 303.296566] x20: 0000000000000001 x19: 00000000000007fc x18: 0000000000000000 [ 303.297531] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaac807ab54 [ 303.298495] x14: ed37489f673633c0 x13: 71c45c606de13f80 x12: 47464259e219acf4 [ 303.299453] x11: ffff000002af7b01 x10: 0000000000000003 x9 : 0000000000000002 [ 303.300431] x8 : 0000000000000010 x7 : ffffd49ea8973230 x6 : 0000000000a85201 [ 303.301412] x5 : 0000000000000000 x4 : ffff0000020c9800 x3 : 00000000000007fc [ 303.302370] x2 : 0000000000000027 x1 : ffff000002467400 x0 : ffff000002467000 [ 303.303341] Call trace: [ 303.303679] 0x0 [ 303.303938] efivar_entry_set_get_size+0x98/0x16c [ 303.304585] efivarfs_file_write+0xd0/0x1a4 [ 303.305148] vfs_write+0xc4/0x2e4 [ 303.305601] ksys_write+0x70/0x104 [ 303.306073] __arm64_sys_write+0x1c/0x28 [ 303.306622] invoke_syscall+0x48/0x114 [ 303.307156] el0_svc_common.constprop.0+0x44/0xec [ 303.307803] do_el0_svc+0x38/0x98 [ 303.308268] el0_svc+0x2c/0x84 [ 303.308702] el0t_64_sync_handler+0xf4/0x120 [ 303.309293] el0t_64_sync+0x190/0x194 [ 303.309794] Code: ???????? ???????? ???????? ???????? (????????) [ 303.310612] ---[ end trace 0000000000000000 ]--- Fix this by adding a .reconfigure() function to the fs operations which we can use to check the requested flags and deny anything that's not RO if the firmware doesn't implement SetVariable at runtime. | ||||
| CVE-2023-52439 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: uio: Fix use-after-free in uio_open core-1 core-2 ------------------------------------------------------- uio_unregister_device uio_open idev = idr_find() device_unregister(&idev->dev) put_device(&idev->dev) uio_device_release get_device(&idev->dev) kfree(idev) uio_free_minor(minor) uio_release put_device(&idev->dev) kfree(idev) ------------------------------------------------------- In the core-1 uio_unregister_device(), the device_unregister will kfree idev when the idev->dev kobject ref is 1. But after core-1 device_unregister, put_device and before doing kfree, the core-2 may get_device. Then: 1. After core-1 kfree idev, the core-2 will do use-after-free for idev. 2. When core-2 do uio_release and put_device, the idev will be double freed. To address this issue, we can get idev atomic & inc idev reference with minor_lock. | ||||
| CVE-2022-48976 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable_offload: fix using __this_cpu_add in preemptible flow_offload_queue_work() can be called in workqueue without bh disabled, like the call trace showed in my act_ct testing, calling NF_FLOW_TABLE_STAT_INC() there would cause a call trace: BUG: using __this_cpu_add() in preemptible [00000000] code: kworker/u4:0/138560 caller is flow_offload_queue_work+0xec/0x1b0 [nf_flow_table] Workqueue: act_ct_workqueue tcf_ct_flow_table_cleanup_work [act_ct] Call Trace: <TASK> dump_stack_lvl+0x33/0x46 check_preemption_disabled+0xc3/0xf0 flow_offload_queue_work+0xec/0x1b0 [nf_flow_table] nf_flow_table_iterate+0x138/0x170 [nf_flow_table] nf_flow_table_free+0x140/0x1a0 [nf_flow_table] tcf_ct_flow_table_cleanup_work+0x2f/0x2b0 [act_ct] process_one_work+0x6a3/0x1030 worker_thread+0x8a/0xdf0 This patch fixes it by using NF_FLOW_TABLE_STAT_INC_ATOMIC() instead in flow_offload_queue_work(). Note that for FLOW_CLS_REPLACE branch in flow_offload_queue_work(), it may not be called in preemptible path, but it's good to use NF_FLOW_TABLE_STAT_INC_ATOMIC() for all cases in flow_offload_queue_work(). | ||||
| CVE-2022-48921 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/fair: Fix fault in reweight_entity Syzbot found a GPF in reweight_entity. This has been bisected to commit 4ef0c5c6b5ba ("kernel/sched: Fix sched_fork() access an invalid sched_task_group") There is a race between sched_post_fork() and setpriority(PRIO_PGRP) within a thread group that causes a null-ptr-deref in reweight_entity() in CFS. The scenario is that the main process spawns number of new threads, which then call setpriority(PRIO_PGRP, 0, -20), wait, and exit. For each of the new threads the copy_process() gets invoked, which adds the new task_struct and calls sched_post_fork() for it. In the above scenario there is a possibility that setpriority(PRIO_PGRP) and set_one_prio() will be called for a thread in the group that is just being created by copy_process(), and for which the sched_post_fork() has not been executed yet. This will trigger a null pointer dereference in reweight_entity(), as it will try to access the run queue pointer, which hasn't been set. Before the mentioned change the cfs_rq pointer for the task has been set in sched_fork(), which is called much earlier in copy_process(), before the new task is added to the thread_group. Now it is done in the sched_post_fork(), which is called after that. To fix the issue the remove the update_load param from the update_load param() function and call reweight_task() only if the task flag doesn't have the TASK_NEW flag set. | ||||
| CVE-2022-48836 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: aiptek - properly check endpoint type Syzbot reported warning in usb_submit_urb() which is caused by wrong endpoint type. There was a check for the number of endpoints, but not for the type of endpoint. Fix it by replacing old desc.bNumEndpoints check with usb_find_common_endpoints() helper for finding endpoints Fail log: usb 5-1: BOGUS urb xfer, pipe 1 != type 3 WARNING: CPU: 2 PID: 48 at drivers/usb/core/urb.c:502 usb_submit_urb+0xed2/0x18a0 drivers/usb/core/urb.c:502 Modules linked in: CPU: 2 PID: 48 Comm: kworker/2:2 Not tainted 5.17.0-rc6-syzkaller-00226-g07ebd38a0da2 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 Workqueue: usb_hub_wq hub_event ... Call Trace: <TASK> aiptek_open+0xd5/0x130 drivers/input/tablet/aiptek.c:830 input_open_device+0x1bb/0x320 drivers/input/input.c:629 kbd_connect+0xfe/0x160 drivers/tty/vt/keyboard.c:1593 | ||||
| CVE-2022-48743 | 2 Linux, Redhat | 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more | 2025-05-04 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: amd-xgbe: Fix skb data length underflow There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. | ||||
| CVE-2021-47055 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: require write permissions for locking and badblock ioctls MEMLOCK, MEMUNLOCK and OTPLOCK modify protection bits. Thus require write permission. Depending on the hardware MEMLOCK might even be write-once, e.g. for SPI-NOR flashes with their WP# tied to GND. OTPLOCK is always write-once. MEMSETBADBLOCK modifies the bad block table. | ||||
| CVE-2024-56653 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btmtk: avoid UAF in btmtk_process_coredump hci_devcd_append may lead to the release of the skb, so it cannot be accessed once it is called. ================================================================== BUG: KASAN: slab-use-after-free in btmtk_process_coredump+0x2a7/0x2d0 [btmtk] Read of size 4 at addr ffff888033cfabb0 by task kworker/0:3/82 CPU: 0 PID: 82 Comm: kworker/0:3 Tainted: G U 6.6.40-lockdep-03464-g1d8b4eb3060e #1 b0b3c1cc0c842735643fb411799d97921d1f688c Hardware name: Google Yaviks_Ufs/Yaviks_Ufs, BIOS Google_Yaviks_Ufs.15217.552.0 05/07/2024 Workqueue: events btusb_rx_work [btusb] Call Trace: <TASK> dump_stack_lvl+0xfd/0x150 print_report+0x131/0x780 kasan_report+0x177/0x1c0 btmtk_process_coredump+0x2a7/0x2d0 [btmtk 03edd567dd71a65958807c95a65db31d433e1d01] btusb_recv_acl_mtk+0x11c/0x1a0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] btusb_rx_work+0x9e/0xe0 [btusb 675430d1e87c4f24d0c1f80efe600757a0f32bec] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 </TASK> Allocated by task 82: stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80 __kasan_slab_alloc+0x4e/0x60 kmem_cache_alloc+0x19f/0x360 skb_clone+0x132/0xf70 btusb_recv_acl_mtk+0x104/0x1a0 [btusb] btusb_rx_work+0x9e/0xe0 [btusb] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 Freed by task 1733: stack_trace_save+0xdc/0x190 kasan_set_track+0x4e/0x80 kasan_save_free_info+0x28/0xb0 ____kasan_slab_free+0xfd/0x170 kmem_cache_free+0x183/0x3f0 hci_devcd_rx+0x91a/0x2060 [bluetooth] worker_thread+0xe44/0x2cc0 kthread+0x2ff/0x3a0 ret_from_fork+0x51/0x80 ret_from_fork_asm+0x1b/0x30 The buggy address belongs to the object at ffff888033cfab40 which belongs to the cache skbuff_head_cache of size 232 The buggy address is located 112 bytes inside of freed 232-byte region [ffff888033cfab40, ffff888033cfac28) The buggy address belongs to the physical page: page:00000000a174ba93 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x33cfa head:00000000a174ba93 order:1 entire_mapcount:0 nr_pages_mapped:0 pincount:0 anon flags: 0x4000000000000840(slab|head|zone=1) page_type: 0xffffffff() raw: 4000000000000840 ffff888100848a00 0000000000000000 0000000000000001 raw: 0000000000000000 0000000080190019 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888033cfaa80: fb fb fb fb fb fb fb fb fb fb fb fb fb fc fc fc ffff888033cfab00: fc fc fc fc fc fc fc fc fa fb fb fb fb fb fb fb >ffff888033cfab80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888033cfac00: fb fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc ffff888033cfac80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Check if we need to call hci_devcd_complete before calling hci_devcd_append. That requires that we check data->cd_info.cnt >= MTK_COREDUMP_NUM instead of data->cd_info.cnt > MTK_COREDUMP_NUM, as we increment data->cd_info.cnt only once the call to hci_devcd_append succeeds. | ||||
| CVE-2024-53232 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iommu/s390: Implement blocking domain This fixes a crash when surprise hot-unplugging a PCI device. This crash happens because during hot-unplug __iommu_group_set_domain_nofail() attaching the default domain fails when the platform no longer recognizes the device as it has already been removed and we end up with a NULL domain pointer and UAF. This is exactly the case referred to in the second comment in __iommu_device_set_domain() and just as stated there if we can instead attach the blocking domain the UAF is prevented as this can handle the already removed device. Implement the blocking domain to use this handling. With this change, the crash is fixed but we still hit a warning attempting to change DMA ownership on a blocked device. | ||||
| CVE-2024-53222 | 2 Linux, Redhat | 2 Linux Kernel, Enterprise Linux | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: zram: fix NULL pointer in comp_algorithm_show() LTP reported a NULL pointer dereference as followed: CPU: 7 UID: 0 PID: 5995 Comm: cat Kdump: loaded Not tainted 6.12.0-rc6+ #3 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 pstate: 40400005 (nZcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : __pi_strcmp+0x24/0x140 lr : zcomp_available_show+0x60/0x100 [zram] sp : ffff800088b93b90 x29: ffff800088b93b90 x28: 0000000000000001 x27: 0000000000400cc0 x26: 0000000000000ffe x25: ffff80007b3e2388 x24: 0000000000000000 x23: ffff80007b3e2390 x22: ffff0004041a9000 x21: ffff80007b3e2900 x20: 0000000000000000 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: ffff80007b3e2900 x9 : ffff80007b3cb280 x8 : 0101010101010101 x7 : 0000000000000000 x6 : 0000000000000000 x5 : 0000000000000040 x4 : 0000000000000000 x3 : 00656c722d6f7a6c x2 : 0000000000000000 x1 : ffff80007b3e2900 x0 : 0000000000000000 Call trace: __pi_strcmp+0x24/0x140 comp_algorithm_show+0x40/0x70 [zram] dev_attr_show+0x28/0x80 sysfs_kf_seq_show+0x90/0x140 kernfs_seq_show+0x34/0x48 seq_read_iter+0x1d4/0x4e8 kernfs_fop_read_iter+0x40/0x58 new_sync_read+0x9c/0x168 vfs_read+0x1a8/0x1f8 ksys_read+0x74/0x108 __arm64_sys_read+0x24/0x38 invoke_syscall+0x50/0x120 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x38/0x138 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x188/0x190 The zram->comp_algs[ZRAM_PRIMARY_COMP] can be NULL in zram_add() if comp_algorithm_set() has not been called. User can access the zram device by sysfs after device_add_disk(), so there is a time window to trigger the NULL pointer dereference. Move it ahead device_add_disk() to make sure when user can access the zram device, it is ready. comp_algorithm_set() is protected by zram->init_lock in other places and no such problem. | ||||