Total
12293 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2021-47001 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix cwnd update ordering After a reconnect, the reply handler is opening the cwnd (and thus enabling more RPC Calls to be sent) /before/ rpcrdma_post_recvs() can post enough Receive WRs to receive their replies. This causes an RNR and the new connection is lost immediately. The race is most clearly exposed when KASAN and disconnect injection are enabled. This slows down rpcrdma_rep_create() enough to allow the send side to post a bunch of RPC Calls before the Receive completion handler can invoke ib_post_recv(). | ||||
| CVE-2021-46990 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/64s: Fix crashes when toggling entry flush barrier The entry flush mitigation can be enabled/disabled at runtime via a debugfs file (entry_flush), which causes the kernel to patch itself to enable/disable the relevant mitigations. However depending on which mitigation we're using, it may not be safe to do that patching while other CPUs are active. For example the following crash: sleeper[15639]: segfault (11) at c000000000004c20 nip c000000000004c20 lr c000000000004c20 Shows that we returned to userspace with a corrupted LR that points into the kernel, due to executing the partially patched call to the fallback entry flush (ie. we missed the LR restore). Fix it by doing the patching under stop machine. The CPUs that aren't doing the patching will be spinning in the core of the stop machine logic. That is currently sufficient for our purposes, because none of the patching we do is to that code or anywhere in the vicinity. | ||||
| CVE-2021-46974 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix masking negation logic upon negative dst register The negation logic for the case where the off_reg is sitting in the dst register is not correct given then we cannot just invert the add to a sub or vice versa. As a fix, perform the final bitwise and-op unconditionally into AX from the off_reg, then move the pointer from the src to dst and finally use AX as the source for the original pointer arithmetic operation such that the inversion yields a correct result. The single non-AX mov in between is possible given constant blinding is retaining it as it's not an immediate based operation. | ||||
| CVE-2021-4454 | 2025-05-04 | 3.3 Low | ||
| In the Linux kernel, the following vulnerability has been resolved: can: j1939: fix errant WARN_ON_ONCE in j1939_session_deactivate The conclusion "j1939_session_deactivate() should be called with a session ref-count of at least 2" is incorrect. In some concurrent scenarios, j1939_session_deactivate can be called with the session ref-count less than 2. But there is not any problem because it will check the session active state before session putting in j1939_session_deactivate_locked(). Here is the concurrent scenario of the problem reported by syzbot and my reproduction log. cpu0 cpu1 j1939_xtp_rx_eoma j1939_xtp_rx_abort_one j1939_session_get_by_addr [kref == 2] j1939_session_get_by_addr [kref == 3] j1939_session_deactivate [kref == 2] j1939_session_put [kref == 1] j1939_session_completed j1939_session_deactivate WARN_ON_ONCE(kref < 2) ===================================================== WARNING: CPU: 1 PID: 21 at net/can/j1939/transport.c:1088 j1939_session_deactivate+0x5f/0x70 CPU: 1 PID: 21 Comm: ksoftirqd/1 Not tainted 5.14.0-rc7+ #32 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 RIP: 0010:j1939_session_deactivate+0x5f/0x70 Call Trace: j1939_session_deactivate_activate_next+0x11/0x28 j1939_xtp_rx_eoma+0x12a/0x180 j1939_tp_recv+0x4a2/0x510 j1939_can_recv+0x226/0x380 can_rcv_filter+0xf8/0x220 can_receive+0x102/0x220 ? process_backlog+0xf0/0x2c0 can_rcv+0x53/0xf0 __netif_receive_skb_one_core+0x67/0x90 ? process_backlog+0x97/0x2c0 __netif_receive_skb+0x22/0x80 | ||||
| CVE-2024-58086 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: drm/v3d: Stop active perfmon if it is being destroyed If the active performance monitor (`v3d->active_perfmon`) is being destroyed, stop it first. Currently, the active perfmon is not stopped during destruction, leaving the `v3d->active_perfmon` pointer stale. This can lead to undefined behavior and instability. This patch ensures that the active perfmon is stopped before being destroyed, aligning with the behavior introduced in commit 7d1fd3638ee3 ("drm/v3d: Stop the active perfmon before being destroyed"). | ||||
| CVE-2024-58084 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: qcom: scm: Fix missing read barrier in qcom_scm_get_tzmem_pool() Commit 2e4955167ec5 ("firmware: qcom: scm: Fix __scm and waitq completion variable initialization") introduced a write barrier in probe function to store global '__scm' variable. We all known barriers are paired (see memory-barriers.txt: "Note that write barriers should normally be paired with read or address-dependency barriers"), therefore accessing it from concurrent contexts requires read barrier. Previous commit added such barrier in qcom_scm_is_available(), so let's use that directly. Lack of this read barrier can result in fetching stale '__scm' variable value, NULL, and dereferencing it. Note that barrier in qcom_scm_is_available() satisfies here the control dependency. | ||||
| CVE-2024-57993 | 2025-05-04 | 3.3 Low | ||
| In the Linux kernel, the following vulnerability has been resolved: HID: hid-thrustmaster: Fix warning in thrustmaster_probe by adding endpoint check syzbot has found a type mismatch between a USB pipe and the transfer endpoint, which is triggered by the hid-thrustmaster driver[1]. There is a number of similar, already fixed issues [2]. In this case as in others, implementing check for endpoint type fixes the issue. [1] https://syzkaller.appspot.com/bug?extid=040e8b3db6a96908d470 [2] https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622 | ||||
| CVE-2024-57941 | 2025-05-04 | 4.7 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix the (non-)cancellation of copy when cache is temporarily disabled When the caching for a cookie is temporarily disabled (e.g. due to a DIO write on that file), future copying to the cache for that file is disabled until all fds open on that file are closed. However, if netfslib is using the deprecated PG_private_2 method (such as is currently used by ceph), and decides it wants to copy to the cache, netfs_advance_write() will just bail at the first check seeing that the cache stream is unavailable, and indicate that it dealt with all the content. This means that we have no subrequests to provide notifications to drive the state machine or even to pin the request and the request just gets discarded, leaving the folios with PG_private_2 set. Fix this by jumping directly to cancel the request if the cache is not available. That way, we don't remove mark3 from the folio_queue list and netfs_pgpriv2_cancel() will clean up the folios. This was found by running the generic/013 xfstest against ceph with an active cache and the "-o fsc" option passed to ceph. That would usually hang | ||||
| CVE-2024-57936 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: Fix max SGEs for the Work Request Gen P7 supports up to 13 SGEs for now. WQE software structure can hold only 6 now. Since the max send sge is reported as 13, the stack can give requests up to 13 SGEs. This is causing traffic failures and system crashes. Use the define for max SGE supported for variable size. This will work for both static and variable WQEs. | ||||
| CVE-2024-57885 | 2025-05-04 | 3.3 Low | ||
| In the Linux kernel, the following vulnerability has been resolved: mm/kmemleak: fix sleeping function called from invalid context at print message Address a bug in the kernel that triggers a "sleeping function called from invalid context" warning when /sys/kernel/debug/kmemleak is printed under specific conditions: - CONFIG_PREEMPT_RT=y - Set SELinux as the LSM for the system - Set kptr_restrict to 1 - kmemleak buffer contains at least one item BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 136, name: cat preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 6 locks held by cat/136: #0: ffff32e64bcbf950 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0xb8/0xe30 #1: ffffafe6aaa9dea0 (scan_mutex){+.+.}-{3:3}, at: kmemleak_seq_start+0x34/0x128 #3: ffff32e6546b1cd0 (&object->lock){....}-{2:2}, at: kmemleak_seq_show+0x3c/0x1e0 #4: ffffafe6aa8d8560 (rcu_read_lock){....}-{1:2}, at: has_ns_capability_noaudit+0x8/0x1b0 #5: ffffafe6aabbc0f8 (notif_lock){+.+.}-{2:2}, at: avc_compute_av+0xc4/0x3d0 irq event stamp: 136660 hardirqs last enabled at (136659): [<ffffafe6a80fd7a0>] _raw_spin_unlock_irqrestore+0xa8/0xd8 hardirqs last disabled at (136660): [<ffffafe6a80fd85c>] _raw_spin_lock_irqsave+0x8c/0xb0 softirqs last enabled at (0): [<ffffafe6a5d50b28>] copy_process+0x11d8/0x3df8 softirqs last disabled at (0): [<0000000000000000>] 0x0 Preemption disabled at: [<ffffafe6a6598a4c>] kmemleak_seq_show+0x3c/0x1e0 CPU: 1 UID: 0 PID: 136 Comm: cat Tainted: G E 6.11.0-rt7+ #34 Tainted: [E]=UNSIGNED_MODULE Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0xa0/0x128 show_stack+0x1c/0x30 dump_stack_lvl+0xe8/0x198 dump_stack+0x18/0x20 rt_spin_lock+0x8c/0x1a8 avc_perm_nonode+0xa0/0x150 cred_has_capability.isra.0+0x118/0x218 selinux_capable+0x50/0x80 security_capable+0x7c/0xd0 has_ns_capability_noaudit+0x94/0x1b0 has_capability_noaudit+0x20/0x30 restricted_pointer+0x21c/0x4b0 pointer+0x298/0x760 vsnprintf+0x330/0xf70 seq_printf+0x178/0x218 print_unreferenced+0x1a4/0x2d0 kmemleak_seq_show+0xd0/0x1e0 seq_read_iter+0x354/0xe30 seq_read+0x250/0x378 full_proxy_read+0xd8/0x148 vfs_read+0x190/0x918 ksys_read+0xf0/0x1e0 __arm64_sys_read+0x70/0xa8 invoke_syscall.constprop.0+0xd4/0x1d8 el0_svc+0x50/0x158 el0t_64_sync+0x17c/0x180 %pS and %pK, in the same back trace line, are redundant, and %pS can void %pK service in certain contexts. %pS alone already provides the necessary information, and if it cannot resolve the symbol, it falls back to printing the raw address voiding the original intent behind the %pK. Additionally, %pK requires a privilege check CAP_SYSLOG enforced through the LSM, which can trigger a "sleeping function called from invalid context" warning under RT_PREEMPT kernels when the check occurs in an atomic context. This issue may also affect other LSMs. This change avoids the unnecessary privilege check and resolves the sleeping function warning without any loss of information. | ||||
| CVE-2024-57800 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: ALSA: memalloc: prefer dma_mapping_error() over explicit address checking With CONFIG_DMA_API_DEBUG enabled, the following warning is observed: DMA-API: snd_hda_intel 0000:03:00.1: device driver failed to check map error[device address=0x00000000ffff0000] [size=20480 bytes] [mapped as single] WARNING: CPU: 28 PID: 2255 at kernel/dma/debug.c:1036 check_unmap+0x1408/0x2430 CPU: 28 UID: 42 PID: 2255 Comm: wireplumber Tainted: G W L 6.12.0-10-133577cad6bf48e5a7848c4338124081393bfe8a+ #759 debug_dma_unmap_page+0xe9/0xf0 snd_dma_wc_free+0x85/0x130 [snd_pcm] snd_pcm_lib_free_pages+0x1e3/0x440 [snd_pcm] snd_pcm_common_ioctl+0x1c9a/0x2960 [snd_pcm] snd_pcm_ioctl+0x6a/0xc0 [snd_pcm] ... Check for returned DMA addresses using specialized dma_mapping_error() helper which is generally recommended for this purpose by Documentation/core-api/dma-api.rst. | ||||
| CVE-2024-56768 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_get_smp_processor_id() on !CONFIG_SMP On x86-64 calling bpf_get_smp_processor_id() in a kernel with CONFIG_SMP disabled can trigger the following bug, as pcpu_hot is unavailable: [ 8.471774] BUG: unable to handle page fault for address: 00000000936a290c [ 8.471849] #PF: supervisor read access in kernel mode [ 8.471881] #PF: error_code(0x0000) - not-present page Fix by inlining a return 0 in the !CONFIG_SMP case. | ||||
| CVE-2024-56763 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Prevent bad count for tracing_cpumask_write If a large count is provided, it will trigger a warning in bitmap_parse_user. Also check zero for it. | ||||
| CVE-2024-56659 | 1 Linux | 1 Linux Kernel | 2025-05-04 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: lapb: increase LAPB_HEADER_LEN It is unclear if net/lapb code is supposed to be ready for 8021q. We can at least avoid crashes like the following : skbuff: skb_under_panic: text:ffffffff8aabe1f6 len:24 put:20 head:ffff88802824a400 data:ffff88802824a3fe tail:0x16 end:0x140 dev:nr0.2 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:206 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 UID: 0 PID: 5508 Comm: dhcpcd Not tainted 6.12.0-rc7-syzkaller-00144-g66418447d27b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:skb_panic net/core/skbuff.c:206 [inline] RIP: 0010:skb_under_panic+0x14b/0x150 net/core/skbuff.c:216 Code: 0d 8d 48 c7 c6 2e 9e 29 8e 48 8b 54 24 08 8b 0c 24 44 8b 44 24 04 4d 89 e9 50 41 54 41 57 41 56 e8 1a 6f 37 02 48 83 c4 20 90 <0f> 0b 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 f3 RSP: 0018:ffffc90002ddf638 EFLAGS: 00010282 RAX: 0000000000000086 RBX: dffffc0000000000 RCX: 7a24750e538ff600 RDX: 0000000000000000 RSI: 0000000000000201 RDI: 0000000000000000 RBP: ffff888034a86650 R08: ffffffff8174b13c R09: 1ffff920005bbe60 R10: dffffc0000000000 R11: fffff520005bbe61 R12: 0000000000000140 R13: ffff88802824a400 R14: ffff88802824a3fe R15: 0000000000000016 FS: 00007f2a5990d740(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000110c2631fd CR3: 0000000029504000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_push+0xe5/0x100 net/core/skbuff.c:2636 nr_header+0x36/0x320 net/netrom/nr_dev.c:69 dev_hard_header include/linux/netdevice.h:3148 [inline] vlan_dev_hard_header+0x359/0x480 net/8021q/vlan_dev.c:83 dev_hard_header include/linux/netdevice.h:3148 [inline] lapbeth_data_transmit+0x1f6/0x2a0 drivers/net/wan/lapbether.c:257 lapb_data_transmit+0x91/0xb0 net/lapb/lapb_iface.c:447 lapb_transmit_buffer+0x168/0x1f0 net/lapb/lapb_out.c:149 lapb_establish_data_link+0x84/0xd0 lapb_device_event+0x4e0/0x670 notifier_call_chain+0x19f/0x3e0 kernel/notifier.c:93 __dev_notify_flags+0x207/0x400 dev_change_flags+0xf0/0x1a0 net/core/dev.c:8922 devinet_ioctl+0xa4e/0x1aa0 net/ipv4/devinet.c:1188 inet_ioctl+0x3d7/0x4f0 net/ipv4/af_inet.c:1003 sock_do_ioctl+0x158/0x460 net/socket.c:1227 sock_ioctl+0x626/0x8e0 net/socket.c:1346 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xf9/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 | ||||
| CVE-2024-56624 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Fix out_fput in iommufd_fault_alloc() As fput() calls the file->f_op->release op, where fault obj and ictx are getting released, there is no need to release these two after fput() one more time, which would result in imbalanced refcounts: refcount_t: decrement hit 0; leaking memory. WARNING: CPU: 48 PID: 2369 at lib/refcount.c:31 refcount_warn_saturate+0x60/0x230 Call trace: refcount_warn_saturate+0x60/0x230 (P) refcount_warn_saturate+0x60/0x230 (L) iommufd_fault_fops_release+0x9c/0xe0 [iommufd] ... VFS: Close: file count is 0 (f_op=iommufd_fops [iommufd]) WARNING: CPU: 48 PID: 2369 at fs/open.c:1507 filp_flush+0x3c/0xf0 Call trace: filp_flush+0x3c/0xf0 (P) filp_flush+0x3c/0xf0 (L) __arm64_sys_close+0x34/0x98 ... imbalanced put on file reference count WARNING: CPU: 48 PID: 2369 at fs/file.c:74 __file_ref_put+0x100/0x138 Call trace: __file_ref_put+0x100/0x138 (P) __file_ref_put+0x100/0x138 (L) __fput_sync+0x4c/0xd0 Drop those two lines to fix the warnings above. | ||||
| CVE-2024-56570 | 1 Redhat | 1 Enterprise Linux | 2025-05-04 | 6.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovl: Filter invalid inodes with missing lookup function Add a check to the ovl_dentry_weird() function to prevent the processing of directory inodes that lack the lookup function. This is important because such inodes can cause errors in overlayfs when passed to the lowerstack. | ||||
| CVE-2024-56372 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: net: tun: fix tun_napi_alloc_frags() syzbot reported the following crash [1] Issue came with the blamed commit. Instead of going through all the iov components, we keep using the first one and end up with a malformed skb. [1] kernel BUG at net/core/skbuff.c:2849 ! Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 0 UID: 0 PID: 6230 Comm: syz-executor132 Not tainted 6.13.0-rc1-syzkaller-00407-g96b6fcc0ee41 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/25/2024 RIP: 0010:__pskb_pull_tail+0x1568/0x1570 net/core/skbuff.c:2848 Code: 38 c1 0f 8c 32 f1 ff ff 4c 89 f7 e8 92 96 74 f8 e9 25 f1 ff ff e8 e8 ae 09 f8 48 8b 5c 24 08 e9 eb fb ff ff e8 d9 ae 09 f8 90 <0f> 0b 66 0f 1f 44 00 00 90 90 90 90 90 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90004cbef30 EFLAGS: 00010293 RAX: ffffffff8995c347 RBX: 00000000fffffff2 RCX: ffff88802cf45a00 RDX: 0000000000000000 RSI: 00000000fffffff2 RDI: 0000000000000000 RBP: ffff88807df0c06a R08: ffffffff8995b084 R09: 1ffff1100fbe185c R10: dffffc0000000000 R11: ffffed100fbe185d R12: ffff888076e85d50 R13: ffff888076e85c80 R14: ffff888076e85cf4 R15: ffff888076e85c80 FS: 00007f0dca6ea6c0(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0dca6ead58 CR3: 00000000119da000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> skb_cow_data+0x2da/0xcb0 net/core/skbuff.c:5284 tipc_aead_decrypt net/tipc/crypto.c:894 [inline] tipc_crypto_rcv+0x402/0x24e0 net/tipc/crypto.c:1844 tipc_rcv+0x57e/0x12a0 net/tipc/node.c:2109 tipc_l2_rcv_msg+0x2bd/0x450 net/tipc/bearer.c:668 __netif_receive_skb_list_ptype net/core/dev.c:5720 [inline] __netif_receive_skb_list_core+0x8b7/0x980 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905 gro_normal_list include/net/gro.h:515 [inline] napi_complete_done+0x2b5/0x870 net/core/dev.c:6256 napi_complete include/linux/netdevice.h:567 [inline] tun_get_user+0x2ea0/0x4890 drivers/net/tun.c:1982 tun_chr_write_iter+0x10d/0x1f0 drivers/net/tun.c:2057 do_iter_readv_writev+0x600/0x880 vfs_writev+0x376/0xba0 fs/read_write.c:1050 do_writev+0x1b6/0x360 fs/read_write.c:1096 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2024-55881 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Play nice with protected guests in complete_hypercall_exit() Use is_64_bit_hypercall() instead of is_64_bit_mode() to detect a 64-bit hypercall when completing said hypercall. For guests with protected state, e.g. SEV-ES and SEV-SNP, KVM must assume the hypercall was made in 64-bit mode as the vCPU state needed to detect 64-bit mode is unavailable. Hacking the sev_smoke_test selftest to generate a KVM_HC_MAP_GPA_RANGE hypercall via VMGEXIT trips the WARN: ------------[ cut here ]------------ WARNING: CPU: 273 PID: 326626 at arch/x86/kvm/x86.h:180 complete_hypercall_exit+0x44/0xe0 [kvm] Modules linked in: kvm_amd kvm ... [last unloaded: kvm] CPU: 273 UID: 0 PID: 326626 Comm: sev_smoke_test Not tainted 6.12.0-smp--392e932fa0f3-feat #470 Hardware name: Google Astoria/astoria, BIOS 0.20240617.0-0 06/17/2024 RIP: 0010:complete_hypercall_exit+0x44/0xe0 [kvm] Call Trace: <TASK> kvm_arch_vcpu_ioctl_run+0x2400/0x2720 [kvm] kvm_vcpu_ioctl+0x54f/0x630 [kvm] __se_sys_ioctl+0x6b/0xc0 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2024-53225 | 2025-05-04 | 4.4 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: iommu/tegra241-cmdqv: Fix alignment failure at max_n_shift When configuring a kernel with PAGE_SIZE=4KB, depending on its setting of CONFIG_CMA_ALIGNMENT, VCMDQ_LOG2SIZE_MAX=19 could fail the alignment test and trigger a WARN_ON: WARNING: at drivers/iommu/arm/arm-smmu-v3/arm-smmu-v3.c:3646 Call trace: arm_smmu_init_one_queue+0x15c/0x210 tegra241_cmdqv_init_structures+0x114/0x338 arm_smmu_device_probe+0xb48/0x1d90 Fix it by capping max_n_shift to CMDQ_MAX_SZ_SHIFT as SMMUv3 CMDQ does. | ||||
| CVE-2024-53219 | 2025-05-04 | 5.5 Medium | ||
| In the Linux kernel, the following vulnerability has been resolved: virtiofs: use pages instead of pointer for kernel direct IO When trying to insert a 10MB kernel module kept in a virtio-fs with cache disabled, the following warning was reported: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 404 at mm/page_alloc.c:4551 ...... Modules linked in: CPU: 1 PID: 404 Comm: insmod Not tainted 6.9.0-rc5+ #123 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) ...... RIP: 0010:__alloc_pages+0x2bf/0x380 ...... Call Trace: <TASK> ? __warn+0x8e/0x150 ? __alloc_pages+0x2bf/0x380 __kmalloc_large_node+0x86/0x160 __kmalloc+0x33c/0x480 virtio_fs_enqueue_req+0x240/0x6d0 virtio_fs_wake_pending_and_unlock+0x7f/0x190 queue_request_and_unlock+0x55/0x60 fuse_simple_request+0x152/0x2b0 fuse_direct_io+0x5d2/0x8c0 fuse_file_read_iter+0x121/0x160 __kernel_read+0x151/0x2d0 kernel_read+0x45/0x50 kernel_read_file+0x1a9/0x2a0 init_module_from_file+0x6a/0xe0 idempotent_init_module+0x175/0x230 __x64_sys_finit_module+0x5d/0xb0 x64_sys_call+0x1c3/0x9e0 do_syscall_64+0x3d/0xc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 ...... </TASK> ---[ end trace 0000000000000000 ]--- The warning is triggered as follows: 1) syscall finit_module() handles the module insertion and it invokes kernel_read_file() to read the content of the module first. 2) kernel_read_file() allocates a 10MB buffer by using vmalloc() and passes it to kernel_read(). kernel_read() constructs a kvec iter by using iov_iter_kvec() and passes it to fuse_file_read_iter(). 3) virtio-fs disables the cache, so fuse_file_read_iter() invokes fuse_direct_io(). As for now, the maximal read size for kvec iter is only limited by fc->max_read. For virtio-fs, max_read is UINT_MAX, so fuse_direct_io() doesn't split the 10MB buffer. It saves the address and the size of the 10MB-sized buffer in out_args[0] of a fuse request and passes the fuse request to virtio_fs_wake_pending_and_unlock(). 4) virtio_fs_wake_pending_and_unlock() uses virtio_fs_enqueue_req() to queue the request. Because virtiofs need DMA-able address, so virtio_fs_enqueue_req() uses kmalloc() to allocate a bounce buffer for all fuse args, copies these args into the bounce buffer and passed the physical address of the bounce buffer to virtiofsd. The total length of these fuse args for the passed fuse request is about 10MB, so copy_args_to_argbuf() invokes kmalloc() with a 10MB size parameter and it triggers the warning in __alloc_pages(): if (WARN_ON_ONCE_GFP(order > MAX_PAGE_ORDER, gfp)) return NULL; 5) virtio_fs_enqueue_req() will retry the memory allocation in a kworker, but it won't help, because kmalloc() will always return NULL due to the abnormal size and finit_module() will hang forever. A feasible solution is to limit the value of max_read for virtio-fs, so the length passed to kmalloc() will be limited. However it will affect the maximal read size for normal read. And for virtio-fs write initiated from kernel, it has the similar problem but now there is no way to limit fc->max_write in kernel. So instead of limiting both the values of max_read and max_write in kernel, introducing use_pages_for_kvec_io in fuse_conn and setting it as true in virtiofs. When use_pages_for_kvec_io is enabled, fuse will use pages instead of pointer to pass the KVEC_IO data. After switching to pages for KVEC_IO data, these pages will be used for DMA through virtio-fs. If these pages are backed by vmalloc(), {flush|invalidate}_kernel_vmap_range() are necessary to flush or invalidate the cache before the DMA operation. So add two new fields in fuse_args_pages to record the base address of vmalloc area and the condition indicating whether invalidation is needed. Perform the flush in fuse_get_user_pages() for write operations and the invalidation in fuse_release_user_pages() for read operations. It may seem necessary to introduce another fie ---truncated--- | ||||