Filtered by vendor Linux
Subscriptions
Filtered by product Linux Kernel
Subscriptions
Total
12867 CVE
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-39677 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: Fix backlog accounting in qdisc_dequeue_internal This issue applies for the following qdiscs: hhf, fq, fq_codel, and fq_pie, and occurs in their change handlers when adjusting to the new limit. The problem is the following in the values passed to the subsequent qdisc_tree_reduce_backlog call given a tbf parent: When the tbf parent runs out of tokens, skbs of these qdiscs will be placed in gso_skb. Their peek handlers are qdisc_peek_dequeued, which accounts for both qlen and backlog. However, in the case of qdisc_dequeue_internal, ONLY qlen is accounted for when pulling from gso_skb. This means that these qdiscs are missing a qdisc_qstats_backlog_dec when dropping packets to satisfy the new limit in their change handlers. One can observe this issue with the following (with tc patched to support a limit of 0): export TARGET=fq tc qdisc del dev lo root tc qdisc add dev lo root handle 1: tbf rate 8bit burst 100b latency 1ms tc qdisc replace dev lo handle 3: parent 1:1 $TARGET limit 1000 echo ''; echo 'add child'; tc -s -d qdisc show dev lo ping -I lo -f -c2 -s32 -W0.001 127.0.0.1 2>&1 >/dev/null echo ''; echo 'after ping'; tc -s -d qdisc show dev lo tc qdisc change dev lo handle 3: parent 1:1 $TARGET limit 0 echo ''; echo 'after limit drop'; tc -s -d qdisc show dev lo tc qdisc replace dev lo handle 2: parent 1:1 sfq echo ''; echo 'post graft'; tc -s -d qdisc show dev lo The second to last show command shows 0 packets but a positive number (74) of backlog bytes. The problem becomes clearer in the last show command, where qdisc_purge_queue triggers qdisc_tree_reduce_backlog with the positive backlog and causes an underflow in the tbf parent's backlog (4096 Mb instead of 0). To fix this issue, the codepath for all clients of qdisc_dequeue_internal has been simplified: codel, pie, hhf, fq, fq_pie, and fq_codel. qdisc_dequeue_internal handles the backlog adjustments for all cases that do not directly use the dequeue handler. The old fq_codel_change limit adjustment loop accumulated the arguments to the subsequent qdisc_tree_reduce_backlog call through the cstats field. However, this is confusing and error prone as fq_codel_dequeue could also potentially mutate this field (which qdisc_dequeue_internal calls in the non gso_skb case), so we have unified the code here with other qdiscs. | ||||
| CVE-2025-39717 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: open_tree_attr: do not allow id-mapping changes without OPEN_TREE_CLONE As described in commit 7a54947e727b ('Merge patch series "fs: allow changing idmappings"'), open_tree_attr(2) was necessary in order to allow for a detached mount to be created and have its idmappings changed without the risk of any racing threads operating on it. For this reason, mount_setattr(2) still does not allow for id-mappings to be changed. However, there was a bug in commit 2462651ffa76 ("fs: allow changing idmappings") which allowed users to bypass this restriction by calling open_tree_attr(2) *without* OPEN_TREE_CLONE. can_idmap_mount() prevented this bug from allowing an attached mountpoint's id-mapping from being modified (thanks to an is_anon_ns() check), but this still allows for detached (but visible) mounts to have their be id-mapping changed. This risks the same UAF and locking issues as described in the merge commit, and was likely unintentional. | ||||
| CVE-2025-39683 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Limit access to parser->buffer when trace_get_user failed When the length of the string written to set_ftrace_filter exceeds FTRACE_BUFF_MAX, the following KASAN alarm will be triggered: BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0 Read of size 1 at addr ffff0000d00bd5ba by task ash/165 CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty Hardware name: linux,dummy-virt (DT) Call trace: show_stack+0x34/0x50 (C) dump_stack_lvl+0xa0/0x158 print_address_description.constprop.0+0x88/0x398 print_report+0xb0/0x280 kasan_report+0xa4/0xf0 __asan_report_load1_noabort+0x20/0x30 strsep+0x18c/0x1b0 ftrace_process_regex.isra.0+0x100/0x2d8 ftrace_regex_release+0x484/0x618 __fput+0x364/0xa58 ____fput+0x28/0x40 task_work_run+0x154/0x278 do_notify_resume+0x1f0/0x220 el0_svc+0xec/0xf0 el0t_64_sync_handler+0xa0/0xe8 el0t_64_sync+0x1ac/0x1b0 The reason is that trace_get_user will fail when processing a string longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0. Then an OOB access will be triggered in ftrace_regex_release-> ftrace_process_regex->strsep->strpbrk. We can solve this problem by limiting access to parser->buffer when trace_get_user failed. | ||||
| CVE-2025-39698 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: io_uring/futex: ensure io_futex_wait() cleans up properly on failure The io_futex_data is allocated upfront and assigned to the io_kiocb async_data field, but the request isn't marked with REQ_F_ASYNC_DATA at that point. Those two should always go together, as the flag tells io_uring whether the field is valid or not. Additionally, on failure cleanup, the futex handler frees the data but does not clear ->async_data. Clear the data and the flag in the error path as well. Thanks to Trend Micro Zero Day Initiative and particularly ReDress for reporting this. | ||||
| CVE-2025-39682 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: tls: fix handling of zero-length records on the rx_list Each recvmsg() call must process either - only contiguous DATA records (any number of them) - one non-DATA record If the next record has different type than what has already been processed we break out of the main processing loop. If the record has already been decrypted (which may be the case for TLS 1.3 where we don't know type until decryption) we queue the pending record to the rx_list. Next recvmsg() will pick it up from there. Queuing the skb to rx_list after zero-copy decrypt is not possible, since in that case we decrypted directly to the user space buffer, and we don't have an skb to queue (darg.skb points to the ciphertext skb for access to metadata like length). Only data records are allowed zero-copy, and we break the processing loop after each non-data record. So we should never zero-copy and then find out that the record type has changed. The corner case we missed is when the initial record comes from rx_list, and it's zero length. | ||||
| CVE-2022-48982 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: Fix crash when replugging CSR fake controllers It seems fake CSR 5.0 clones can cause the suspend notifier to be registered twice causing the following kernel panic: [ 71.986122] Call Trace: [ 71.986124] <TASK> [ 71.986125] blocking_notifier_chain_register+0x33/0x60 [ 71.986130] hci_register_dev+0x316/0x3d0 [bluetooth 99b5497ea3d09708fa1366c1dc03288bf3cca8da] [ 71.986154] btusb_probe+0x979/0xd85 [btusb e1e0605a4f4c01984a4b9c8ac58c3666ae287477] [ 71.986159] ? __pm_runtime_set_status+0x1a9/0x300 [ 71.986162] ? ktime_get_mono_fast_ns+0x3e/0x90 [ 71.986167] usb_probe_interface+0xe3/0x2b0 [ 71.986171] really_probe+0xdb/0x380 [ 71.986174] ? pm_runtime_barrier+0x54/0x90 [ 71.986177] __driver_probe_device+0x78/0x170 [ 71.986180] driver_probe_device+0x1f/0x90 [ 71.986183] __device_attach_driver+0x89/0x110 [ 71.986186] ? driver_allows_async_probing+0x70/0x70 [ 71.986189] bus_for_each_drv+0x8c/0xe0 [ 71.986192] __device_attach+0xb2/0x1e0 [ 71.986195] bus_probe_device+0x92/0xb0 [ 71.986198] device_add+0x422/0x9a0 [ 71.986201] ? sysfs_merge_group+0xd4/0x110 [ 71.986205] usb_set_configuration+0x57a/0x820 [ 71.986208] usb_generic_driver_probe+0x4f/0x70 [ 71.986211] usb_probe_device+0x3a/0x110 [ 71.986213] really_probe+0xdb/0x380 [ 71.986216] ? pm_runtime_barrier+0x54/0x90 [ 71.986219] __driver_probe_device+0x78/0x170 [ 71.986221] driver_probe_device+0x1f/0x90 [ 71.986224] __device_attach_driver+0x89/0x110 [ 71.986227] ? driver_allows_async_probing+0x70/0x70 [ 71.986230] bus_for_each_drv+0x8c/0xe0 [ 71.986232] __device_attach+0xb2/0x1e0 [ 71.986235] bus_probe_device+0x92/0xb0 [ 71.986237] device_add+0x422/0x9a0 [ 71.986239] ? _dev_info+0x7d/0x98 [ 71.986242] ? blake2s_update+0x4c/0xc0 [ 71.986246] usb_new_device.cold+0x148/0x36d [ 71.986250] hub_event+0xa8a/0x1910 [ 71.986255] process_one_work+0x1c4/0x380 [ 71.986259] worker_thread+0x51/0x390 [ 71.986262] ? rescuer_thread+0x3b0/0x3b0 [ 71.986264] kthread+0xdb/0x110 [ 71.986266] ? kthread_complete_and_exit+0x20/0x20 [ 71.986268] ret_from_fork+0x1f/0x30 [ 71.986273] </TASK> [ 71.986274] ---[ end trace 0000000000000000 ]--- [ 71.986284] btusb: probe of 2-1.6:1.0 failed with error -17 | ||||
| CVE-2025-38399 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Fix NULL pointer dereference in core_scsi3_decode_spec_i_port() The function core_scsi3_decode_spec_i_port(), in its error code path, unconditionally calls core_scsi3_lunacl_undepend_item() passing the dest_se_deve pointer, which may be NULL. This can lead to a NULL pointer dereference if dest_se_deve remains unset. SPC-3 PR SPEC_I_PT: Unable to locate dest_tpg Unable to handle kernel paging request at virtual address dfff800000000012 Call trace: core_scsi3_lunacl_undepend_item+0x2c/0xf0 [target_core_mod] (P) core_scsi3_decode_spec_i_port+0x120c/0x1c30 [target_core_mod] core_scsi3_emulate_pro_register+0x6b8/0xcd8 [target_core_mod] target_scsi3_emulate_pr_out+0x56c/0x840 [target_core_mod] Fix this by adding a NULL check before calling core_scsi3_lunacl_undepend_item() | ||||
| CVE-2025-38728 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb3: fix for slab out of bounds on mount to ksmbd With KASAN enabled, it is possible to get a slab out of bounds during mount to ksmbd due to missing check in parse_server_interfaces() (see below): BUG: KASAN: slab-out-of-bounds in parse_server_interfaces+0x14ee/0x1880 [cifs] Read of size 4 at addr ffff8881433dba98 by task mount/9827 CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary) Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE Hardware name: Dell Inc. Precision Tower 3620/0MWYPT, BIOS 2.13.1 06/14/2019 Call Trace: <TASK> dump_stack_lvl+0x9f/0xf0 print_report+0xd1/0x670 __virt_addr_valid+0x22c/0x430 ? parse_server_interfaces+0x14ee/0x1880 [cifs] ? kasan_complete_mode_report_info+0x2a/0x1f0 ? parse_server_interfaces+0x14ee/0x1880 [cifs] kasan_report+0xd6/0x110 parse_server_interfaces+0x14ee/0x1880 [cifs] __asan_report_load_n_noabort+0x13/0x20 parse_server_interfaces+0x14ee/0x1880 [cifs] ? __pfx_parse_server_interfaces+0x10/0x10 [cifs] ? trace_hardirqs_on+0x51/0x60 SMB3_request_interfaces+0x1ad/0x3f0 [cifs] ? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs] ? SMB2_tcon+0x23c/0x15d0 [cifs] smb3_qfs_tcon+0x173/0x2b0 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] ? cifs_get_tcon+0x105d/0x2120 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_get_tcon+0x105d/0x2120 [cifs] ? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs] cifs_mount_get_tcon+0x369/0xb90 [cifs] ? dfs_cache_find+0xe7/0x150 [cifs] dfs_mount_share+0x985/0x2970 [cifs] ? check_path.constprop.0+0x28/0x50 ? save_trace+0x54/0x370 ? __pfx_dfs_mount_share+0x10/0x10 [cifs] ? __lock_acquire+0xb82/0x2ba0 ? __kasan_check_write+0x18/0x20 cifs_mount+0xbc/0x9e0 [cifs] ? __pfx_cifs_mount+0x10/0x10 [cifs] ? do_raw_spin_unlock+0x5d/0x200 ? cifs_setup_cifs_sb+0x29d/0x810 [cifs] cifs_smb3_do_mount+0x263/0x1990 [cifs] | ||||
| CVE-2025-38711 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb/server: avoid deadlock when linking with ReplaceIfExists If smb2_create_link() is called with ReplaceIfExists set and the name does exist then a deadlock will happen. ksmbd_vfs_kern_path_locked() will return with success and the parent directory will be locked. ksmbd_vfs_remove_file() will then remove the file. ksmbd_vfs_link() will then be called while the parent is still locked. It will try to lock the same parent and will deadlock. This patch moves the ksmbd_vfs_kern_path_unlock() call to *before* ksmbd_vfs_link() and then simplifies the code, removing the file_present flag variable. | ||||
| CVE-2025-38707 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: Add sanity check for file name The length of the file name should be smaller than the directory entry size. | ||||
| CVE-2025-38692 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: exfat: add cluster chain loop check for dir An infinite loop may occur if the following conditions occur due to file system corruption. (1) Condition for exfat_count_dir_entries() to loop infinitely. - The cluster chain includes a loop. - There is no UNUSED entry in the cluster chain. (2) Condition for exfat_create_upcase_table() to loop infinitely. - The cluster chain of the root directory includes a loop. - There are no UNUSED entry and up-case table entry in the cluster chain of the root directory. (3) Condition for exfat_load_bitmap() to loop infinitely. - The cluster chain of the root directory includes a loop. - There are no UNUSED entry and bitmap entry in the cluster chain of the root directory. (4) Condition for exfat_find_dir_entry() to loop infinitely. - The cluster chain includes a loop. - The unused directory entries were exhausted by some operation. (5) Condition for exfat_check_dir_empty() to loop infinitely. - The cluster chain includes a loop. - The unused directory entries were exhausted by some operation. - All files and sub-directories under the directory are deleted. This commit adds checks to break the above infinite loop. | ||||
| CVE-2025-38677 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid out-of-boundary access in dnode page As Jiaming Zhang reported: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x1c1/0x2a0 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 [inline] print_report+0x17e/0x800 mm/kasan/report.c:480 kasan_report+0x147/0x180 mm/kasan/report.c:593 data_blkaddr fs/f2fs/f2fs.h:3053 [inline] f2fs_data_blkaddr fs/f2fs/f2fs.h:3058 [inline] f2fs_get_dnode_of_data+0x1a09/0x1c40 fs/f2fs/node.c:855 f2fs_reserve_block+0x53/0x310 fs/f2fs/data.c:1195 prepare_write_begin fs/f2fs/data.c:3395 [inline] f2fs_write_begin+0xf39/0x2190 fs/f2fs/data.c:3594 generic_perform_write+0x2c7/0x910 mm/filemap.c:4112 f2fs_buffered_write_iter fs/f2fs/file.c:4988 [inline] f2fs_file_write_iter+0x1ec8/0x2410 fs/f2fs/file.c:5216 new_sync_write fs/read_write.c:593 [inline] vfs_write+0x546/0xa90 fs/read_write.c:686 ksys_write+0x149/0x250 fs/read_write.c:738 do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline] do_syscall_64+0xf3/0x3d0 arch/x86/entry/syscall_64.c:94 entry_SYSCALL_64_after_hwframe+0x77/0x7f The root cause is in the corrupted image, there is a dnode has the same node id w/ its inode, so during f2fs_get_dnode_of_data(), it tries to access block address in dnode at offset 934, however it parses the dnode as inode node, so that get_dnode_addr() returns 360, then it tries to access page address from 360 + 934 * 4 = 4096 w/ 4 bytes. To fix this issue, let's add sanity check for node id of all direct nodes during f2fs_get_dnode_of_data(). | ||||
| CVE-2024-58240 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: tls: separate no-async decryption request handling from async If we're not doing async, the handling is much simpler. There's no reference counting, we just need to wait for the completion to wake us up and return its result. We should preferably also use a separate crypto_wait. I'm not seeing a UAF as I did in the past, I think aec7961916f3 ("tls: fix race between async notify and socket close") took care of it. This will make the next fix easier. | ||||
| CVE-2024-42121 | 1 Linux | 1 Linux Kernel | 2025-09-08 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Check index msg_id before read or write [WHAT] msg_id is used as an array index and it cannot be a negative value, and therefore cannot be equal to MOD_HDCP_MESSAGE_ID_INVALID (-1). [HOW] Check whether msg_id is valid before reading and setting. This fixes 4 OVERRUN issues reported by Coverity. | ||||
| CVE-2025-38611 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2023-53137 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2025-38699 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: bfa: Double-free fix When the bfad_im_probe() function fails during initialization, the memory pointed to by bfad->im is freed without setting bfad->im to NULL. Subsequently, during driver uninstallation, when the state machine enters the bfad_sm_stopping state and calls the bfad_im_probe_undo() function, it attempts to free the memory pointed to by bfad->im again, thereby triggering a double-free vulnerability. Set bfad->im to NULL if probing fails. | ||||
| CVE-2025-38701 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: do not BUG when INLINE_DATA_FL lacks system.data xattr A syzbot fuzzed image triggered a BUG_ON in ext4_update_inline_data() when an inode had the INLINE_DATA_FL flag set but was missing the system.data extended attribute. Since this can happen due to a maiciouly fuzzed file system, we shouldn't BUG, but rather, report it as a corrupted file system. Add similar replacements of BUG_ON with EXT4_ERROR_INODE() ii ext4_create_inline_data() and ext4_inline_data_truncate(). | ||||
| CVE-2025-38706 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: core: Check for rtd == NULL in snd_soc_remove_pcm_runtime() snd_soc_remove_pcm_runtime() might be called with rtd == NULL which will leads to null pointer dereference. This was reproduced with topology loading and marking a link as ignore due to missing hardware component on the system. On module removal the soc_tplg_remove_link() would call snd_soc_remove_pcm_runtime() with rtd == NULL since the link was ignored, no runtime was created. | ||||
| CVE-2025-38688 | 1 Linux | 1 Linux Kernel | 2025-09-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: iommufd: Prevent ALIGN() overflow When allocating IOVA the candidate range gets aligned to the target alignment. If the range is close to ULONG_MAX then the ALIGN() can wrap resulting in a corrupted iova. Open code the ALIGN() using get_add_overflow() to prevent this. This simplifies the checks as we don't need to check for length earlier either. Consolidate the two copies of this code under a single helper. This bug would allow userspace to create a mapping that overlaps with some other mapping or a reserved range. | ||||