Filtered by vendor Redhat Subscriptions
Filtered by product Rhel E4s Subscriptions
Total 1589 CVE
CVE Vendors Products Updated CVSS v3.1
CVE-2021-47468 1 Redhat 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more 2025-05-04 4.4 Medium
In the Linux kernel, the following vulnerability has been resolved: isdn: mISDN: Fix sleeping function called from invalid context The driver can call card->isac.release() function from an atomic context. Fix this by calling this function after releasing the lock. The following log reveals it: [ 44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018 [ 44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe [ 44.169574 ] INFO: lockdep is turned off. [ 44.169899 ] irq event stamp: 0 [ 44.170160 ] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 44.170627 ] hardirqs last disabled at (0): [<ffffffff814209ed>] copy_process+0x132d/0x3e00 [ 44.171240 ] softirqs last enabled at (0): [<ffffffff81420a1a>] copy_process+0x135a/0x3e00 [ 44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 44.172318 ] Preemption disabled at: [ 44.172320 ] [<ffffffffa009b0a9>] nj_release+0x69/0x500 [netjet] [ 44.174441 ] Call Trace: [ 44.174630 ] dump_stack_lvl+0xa8/0xd1 [ 44.174912 ] dump_stack+0x15/0x17 [ 44.175166 ] ___might_sleep+0x3a2/0x510 [ 44.175459 ] ? nj_release+0x69/0x500 [netjet] [ 44.175791 ] __might_sleep+0x82/0xe0 [ 44.176063 ] ? start_flush_work+0x20/0x7b0 [ 44.176375 ] start_flush_work+0x33/0x7b0 [ 44.176672 ] ? trace_irq_enable_rcuidle+0x85/0x170 [ 44.177034 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177372 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177711 ] __flush_work+0x11a/0x1a0 [ 44.177991 ] ? flush_work+0x20/0x20 [ 44.178257 ] ? lock_release+0x13c/0x8f0 [ 44.178550 ] ? __kasan_check_write+0x14/0x20 [ 44.178872 ] ? do_raw_spin_lock+0x148/0x360 [ 44.179187 ] ? read_lock_is_recursive+0x20/0x20 [ 44.179530 ] ? __kasan_check_read+0x11/0x20 [ 44.179846 ] ? do_raw_spin_unlock+0x55/0x900 [ 44.180168 ] ? ____kasan_slab_free+0x116/0x140 [ 44.180505 ] ? _raw_spin_unlock_irqrestore+0x41/0x60 [ 44.180878 ] ? skb_queue_purge+0x1a3/0x1c0 [ 44.181189 ] ? kfree+0x13e/0x290 [ 44.181438 ] flush_work+0x17/0x20 [ 44.181695 ] mISDN_freedchannel+0xe8/0x100 [ 44.182006 ] isac_release+0x210/0x260 [mISDNipac] [ 44.182366 ] nj_release+0xf6/0x500 [netjet] [ 44.182685 ] nj_remove+0x48/0x70 [netjet] [ 44.182989 ] pci_device_remove+0xa9/0x250
CVE-2021-47461 1 Redhat 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more 2025-05-04 7.0 High
In the Linux kernel, the following vulnerability has been resolved: userfaultfd: fix a race between writeprotect and exit_mmap() A race is possible when a process exits, its VMAs are removed by exit_mmap() and at the same time userfaultfd_writeprotect() is called. The race was detected by KASAN on a development kernel, but it appears to be possible on vanilla kernels as well. Use mmget_not_zero() to prevent the race as done in other userfaultfd operations.
CVE-2021-47393 1 Redhat 5 Enterprise Linux, Rhel Aus, Rhel E4s and 2 more 2025-05-04 4.7 Medium
In the Linux kernel, the following vulnerability has been resolved: hwmon: (mlxreg-fan) Return non-zero value when fan current state is enforced from sysfs Fan speed minimum can be enforced from sysfs. For example, setting current fan speed to 20 is used to enforce fan speed to be at 100% speed, 19 - to be not below 90% speed, etcetera. This feature provides ability to limit fan speed according to some system wise considerations, like absence of some replaceable units or high system ambient temperature. Request for changing fan minimum speed is configuration request and can be set only through 'sysfs' write procedure. In this situation value of argument 'state' is above nominal fan speed maximum. Return non-zero code in this case to avoid thermal_cooling_device_stats_update() call, because in this case statistics update violates thermal statistics table range. The issues is observed in case kernel is configured with option CONFIG_THERMAL_STATISTICS. Here is the trace from KASAN: [ 159.506659] BUG: KASAN: slab-out-of-bounds in thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.516016] Read of size 4 at addr ffff888116163840 by task hw-management.s/7444 [ 159.545625] Call Trace: [ 159.548366] dump_stack+0x92/0xc1 [ 159.552084] ? thermal_cooling_device_stats_update+0x7d/0xb0 [ 159.635869] thermal_zone_device_update+0x345/0x780 [ 159.688711] thermal_zone_device_set_mode+0x7d/0xc0 [ 159.694174] mlxsw_thermal_modules_init+0x48f/0x590 [mlxsw_core] [ 159.700972] ? mlxsw_thermal_set_cur_state+0x5a0/0x5a0 [mlxsw_core] [ 159.731827] mlxsw_thermal_init+0x763/0x880 [mlxsw_core] [ 160.070233] RIP: 0033:0x7fd995909970 [ 160.074239] Code: 73 01 c3 48 8b 0d 28 d5 2b 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 99 2d 2c 00 00 75 10 b8 01 00 00 00 0f 05 <48> 3d 01 f0 ff .. [ 160.095242] RSP: 002b:00007fff54f5d938 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 160.103722] RAX: ffffffffffffffda RBX: 0000000000000013 RCX: 00007fd995909970 [ 160.111710] RDX: 0000000000000013 RSI: 0000000001906008 RDI: 0000000000000001 [ 160.119699] RBP: 0000000001906008 R08: 00007fd995bc9760 R09: 00007fd996210700 [ 160.127687] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000013 [ 160.135673] R13: 0000000000000001 R14: 00007fd995bc8600 R15: 0000000000000013 [ 160.143671] [ 160.145338] Allocated by task 2924: [ 160.149242] kasan_save_stack+0x19/0x40 [ 160.153541] __kasan_kmalloc+0x7f/0xa0 [ 160.157743] __kmalloc+0x1a2/0x2b0 [ 160.161552] thermal_cooling_device_setup_sysfs+0xf9/0x1a0 [ 160.167687] __thermal_cooling_device_register+0x1b5/0x500 [ 160.173833] devm_thermal_of_cooling_device_register+0x60/0xa0 [ 160.180356] mlxreg_fan_probe+0x474/0x5e0 [mlxreg_fan] [ 160.248140] [ 160.249807] The buggy address belongs to the object at ffff888116163400 [ 160.249807] which belongs to the cache kmalloc-1k of size 1024 [ 160.263814] The buggy address is located 64 bytes to the right of [ 160.263814] 1024-byte region [ffff888116163400, ffff888116163800) [ 160.277536] The buggy address belongs to the page: [ 160.282898] page:0000000012275840 refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff888116167000 pfn:0x116160 [ 160.294872] head:0000000012275840 order:3 compound_mapcount:0 compound_pincount:0 [ 160.303251] flags: 0x200000000010200(slab|head|node=0|zone=2) [ 160.309694] raw: 0200000000010200 ffffea00046f7208 ffffea0004928208 ffff88810004dbc0 [ 160.318367] raw: ffff888116167000 00000000000a0006 00000001ffffffff 0000000000000000 [ 160.327033] page dumped because: kasan: bad access detected [ 160.333270] [ 160.334937] Memory state around the buggy address: [ 160.356469] >ffff888116163800: fc ..
CVE-2021-47385 2 Linux, Redhat 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field If driver read val value sufficient for (val & 0x08) && (!(val & 0x80)) && ((val & 0x7) == ((val >> 4) & 0x7)) from device then Null pointer dereference occurs. (It is possible if tmp = 0b0xyz1xyz, where same literals mean same numbers) Also lm75[] does not serve a purpose anymore after switching to devm_i2c_new_dummy_device() in w83791d_detect_subclients(). The patch fixes possible NULL pointer dereference by removing lm75[]. Found by Linux Driver Verification project (linuxtesting.org). [groeck: Dropped unnecessary continuation lines, fixed multipline alignment]
CVE-2021-47378 2 Linux, Redhat 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more 2025-05-04 9.8 Critical
In the Linux kernel, the following vulnerability has been resolved: nvme-rdma: destroy cm id before destroy qp to avoid use after free We should always destroy cm_id before destroy qp to avoid to get cma event after qp was destroyed, which may lead to use after free. In RDMA connection establishment error flow, don't destroy qp in cm event handler.Just report cm_error to upper level, qp will be destroy in nvme_rdma_alloc_queue() after destroy cm id.
CVE-2021-47356 2 Linux, Redhat 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more 2025-05-04 7.7 High
In the Linux kernel, the following vulnerability has been resolved: mISDN: fix possible use-after-free in HFC_cleanup() This module's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself.
CVE-2021-47311 2 Linux, Redhat 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more 2025-05-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net: qcom/emac: fix UAF in emac_remove adpt is netdev private data and it cannot be used after free_netdev() call. Using adpt after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function.
CVE-2021-47310 2 Linux, Redhat 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more 2025-05-04 7.8 High
In the Linux kernel, the following vulnerability has been resolved: net: ti: fix UAF in tlan_remove_one priv is netdev private data and it cannot be used after free_netdev() call. Using priv after free_netdev() can cause UAF bug. Fix it by moving free_netdev() at the end of the function.
CVE-2021-47138 2 Linux, Redhat 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more 2025-05-04 7.1 High
In the Linux kernel, the following vulnerability has been resolved: cxgb4: avoid accessing registers when clearing filters Hardware register having the server TID base can contain invalid values when adapter is in bad state (for example, due to AER fatal error). Reading these invalid values in the register can lead to out-of-bound memory access. So, fix by using the saved server TID base when clearing filters.
CVE-2021-47069 2 Linux, Redhat 6 Linux Kernel, Enterprise Linux, Rhel Aus and 3 more 2025-05-04 7.0 High
In the Linux kernel, the following vulnerability has been resolved: ipc/mqueue, msg, sem: avoid relying on a stack reference past its expiry do_mq_timedreceive calls wq_sleep with a stack local address. The sender (do_mq_timedsend) uses this address to later call pipelined_send. This leads to a very hard to trigger race where a do_mq_timedreceive call might return and leave do_mq_timedsend to rely on an invalid address, causing the following crash: RIP: 0010:wake_q_add_safe+0x13/0x60 Call Trace: __x64_sys_mq_timedsend+0x2a9/0x490 do_syscall_64+0x80/0x680 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f5928e40343 The race occurs as: 1. do_mq_timedreceive calls wq_sleep with the address of `struct ext_wait_queue` on function stack (aliased as `ewq_addr` here) - it holds a valid `struct ext_wait_queue *` as long as the stack has not been overwritten. 2. `ewq_addr` gets added to info->e_wait_q[RECV].list in wq_add, and do_mq_timedsend receives it via wq_get_first_waiter(info, RECV) to call __pipelined_op. 3. Sender calls __pipelined_op::smp_store_release(&this->state, STATE_READY). Here is where the race window begins. (`this` is `ewq_addr`.) 4. If the receiver wakes up now in do_mq_timedreceive::wq_sleep, it will see `state == STATE_READY` and break. 5. do_mq_timedreceive returns, and `ewq_addr` is no longer guaranteed to be a `struct ext_wait_queue *` since it was on do_mq_timedreceive's stack. (Although the address may not get overwritten until another function happens to touch it, which means it can persist around for an indefinite time.) 6. do_mq_timedsend::__pipelined_op() still believes `ewq_addr` is a `struct ext_wait_queue *`, and uses it to find a task_struct to pass to the wake_q_add_safe call. In the lucky case where nothing has overwritten `ewq_addr` yet, `ewq_addr->task` is the right task_struct. In the unlucky case, __pipelined_op::wake_q_add_safe gets handed a bogus address as the receiver's task_struct causing the crash. do_mq_timedsend::__pipelined_op() should not dereference `this` after setting STATE_READY, as the receiver counterpart is now free to return. Change __pipelined_op to call wake_q_add_safe on the receiver's task_struct returned by get_task_struct, instead of dereferencing `this` which sits on the receiver's stack. As Manfred pointed out, the race potentially also exists in ipc/msg.c::expunge_all and ipc/sem.c::wake_up_sem_queue_prepare. Fix those in the same way.
CVE-2021-46960 2 Linux, Redhat 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: cifs: Return correct error code from smb2_get_enc_key Avoid a warning if the error percolates back up: [440700.376476] CIFS VFS: \\otters.example.com crypt_message: Could not get encryption key [440700.386947] ------------[ cut here ]------------ [440700.386948] err = 1 [440700.386977] WARNING: CPU: 11 PID: 2733 at /build/linux-hwe-5.4-p6lk6L/linux-hwe-5.4-5.4.0/lib/errseq.c:74 errseq_set+0x5c/0x70 ... [440700.397304] CPU: 11 PID: 2733 Comm: tar Tainted: G OE 5.4.0-70-generic #78~18.04.1-Ubuntu ... [440700.397334] Call Trace: [440700.397346] __filemap_set_wb_err+0x1a/0x70 [440700.397419] cifs_writepages+0x9c7/0xb30 [cifs] [440700.397426] do_writepages+0x4b/0xe0 [440700.397444] __filemap_fdatawrite_range+0xcb/0x100 [440700.397455] filemap_write_and_wait+0x42/0xa0 [440700.397486] cifs_setattr+0x68b/0xf30 [cifs] [440700.397493] notify_change+0x358/0x4a0 [440700.397500] utimes_common+0xe9/0x1c0 [440700.397510] do_utimes+0xc5/0x150 [440700.397520] __x64_sys_utimensat+0x88/0xd0
CVE-2021-46915 2 Linux, Redhat 4 Linux Kernel, Rhel Aus, Rhel E4s and 1 more 2025-05-04 5.5 Medium
In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_limit: avoid possible divide error in nft_limit_init div_u64() divides u64 by u32. nft_limit_init() wants to divide u64 by u64, use the appropriate math function (div64_u64) divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8390 Comm: syz-executor188 Not tainted 5.12.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:div_u64_rem include/linux/math64.h:28 [inline] RIP: 0010:div_u64 include/linux/math64.h:127 [inline] RIP: 0010:nft_limit_init+0x2a2/0x5e0 net/netfilter/nft_limit.c:85 Code: ef 4c 01 eb 41 0f 92 c7 48 89 de e8 38 a5 22 fa 4d 85 ff 0f 85 97 02 00 00 e8 ea 9e 22 fa 4c 0f af f3 45 89 ed 31 d2 4c 89 f0 <49> f7 f5 49 89 c6 e8 d3 9e 22 fa 48 8d 7d 48 48 b8 00 00 00 00 00 RSP: 0018:ffffc90009447198 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000200000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff875152e6 RDI: 0000000000000003 RBP: ffff888020f80908 R08: 0000200000000000 R09: 0000000000000000 R10: ffffffff875152d8 R11: 0000000000000000 R12: ffffc90009447270 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 000000000097a300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c4 CR3: 0000000026a52000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: nf_tables_newexpr net/netfilter/nf_tables_api.c:2675 [inline] nft_expr_init+0x145/0x2d0 net/netfilter/nf_tables_api.c:2713 nft_set_elem_expr_alloc+0x27/0x280 net/netfilter/nf_tables_api.c:5160 nf_tables_newset+0x1997/0x3150 net/netfilter/nf_tables_api.c:4321 nfnetlink_rcv_batch+0x85a/0x21b0 net/netfilter/nfnetlink.c:456 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:580 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:598 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae
CVE-2022-40284 4 Debian, Fedoraproject, Redhat and 1 more 9 Debian Linux, Fedora, Advanced Virtualization and 6 more 2025-05-02 7.8 High
A buffer overflow was discovered in NTFS-3G before 2022.10.3. Crafted metadata in an NTFS image can cause code execution. A local attacker can exploit this if the ntfs-3g binary is setuid root. A physically proximate attacker can exploit this if NTFS-3G software is configured to execute upon attachment of an external storage device.
CVE-2024-38475 3 Apache, Netapp, Redhat 9 Http Server, Ontap 9, Enterprise Linux and 6 more 2025-05-02 9.1 Critical
Improper escaping of output in mod_rewrite in Apache HTTP Server 2.4.59 and earlier allows an attacker to map URLs to filesystem locations that are permitted to be served by the server but are not intentionally/directly reachable by any URL, resulting in code execution or source code disclosure. Substitutions in server context that use a backreferences or variables as the first segment of the substitution are affected.  Some unsafe RewiteRules will be broken by this change and the rewrite flag "UnsafePrefixStat" can be used to opt back in once ensuring the substitution is appropriately constrained.
CVE-2025-2817 1 Redhat 4 Enterprise Linux, Rhel E4s, Rhel Els and 1 more 2025-05-02 8.8 High
Thunderbird's update mechanism allowed a medium-integrity user process to interfere with the SYSTEM-level updater by manipulating the file-locking behavior. By injecting code into the user-privileged process, an attacker could bypass intended access controls, allowing SYSTEM-level file operations on paths controlled by a non-privileged user and enabling privilege escalation. This vulnerability affects Firefox < 138, Firefox ESR < 128.10, Firefox ESR < 115.23, Thunderbird < 138, and Thunderbird < 128.10.
CVE-2025-22869 2 Go, Redhat 15 Ssh, Acm, Advanced Cluster Security and 12 more 2025-05-01 7.5 High
SSH servers which implement file transfer protocols are vulnerable to a denial of service attack from clients which complete the key exchange slowly, or not at all, causing pending content to be read into memory, but never transmitted.
CVE-2023-5176 3 Debian, Mozilla, Redhat 9 Debian Linux, Firefox, Firefox Esr and 6 more 2025-05-01 9.8 Critical
Memory safety bugs present in Firefox 117, Firefox ESR 115.2, and Thunderbird 115.2. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability affects Firefox < 118, Firefox ESR < 115.3, and Thunderbird < 115.3.
CVE-2024-52337 1 Redhat 9 Enterprise Linux, Rhel Aus, Rhel E4s and 6 more 2025-05-01 5.5 Medium
A log spoofing flaw was found in the Tuned package due to improper sanitization of some API arguments. This flaw allows an attacker to pass a controlled sequence of characters; newlines can be inserted into the log. Instead of the 'evil' the attacker could mimic a valid TuneD log line and trick the administrator. The quotes '' are usually used in TuneD logs citing raw user input, so there will always be the ' character ending the spoofed input, and the administrator can easily overlook this. This logged string is later used in logging and in the output of utilities, for example, `tuned-adm get_instances` or other third-party programs that use Tuned's D-Bus interface for such operations.
CVE-2021-44790 8 Apache, Apple, Debian and 5 more 20 Http Server, Mac Os X, Macos and 17 more 2025-05-01 9.8 Critical
A carefully crafted request body can cause a buffer overflow in the mod_lua multipart parser (r:parsebody() called from Lua scripts). The Apache httpd team is not aware of an exploit for the vulnerabilty though it might be possible to craft one. This issue affects Apache HTTP Server 2.4.51 and earlier.
CVE-2022-45060 5 Debian, Fedoraproject, Redhat and 2 more 11 Debian Linux, Fedora, Enterprise Linux and 8 more 2025-05-01 7.5 High
An HTTP Request Forgery issue was discovered in Varnish Cache 5.x and 6.x before 6.0.11, 7.x before 7.1.2, and 7.2.x before 7.2.1. An attacker may introduce characters through HTTP/2 pseudo-headers that are invalid in the context of an HTTP/1 request line, causing the Varnish server to produce invalid HTTP/1 requests to the backend. This could, in turn, be used to exploit vulnerabilities in a server behind the Varnish server. Note: the 6.0.x LTS series (before 6.0.11) is affected.